• Journal of Sericultural and Entomological Science
• /
• v.4
• /
• pp.27-31
• /
• 1965

The aim of this work was to investigate how the mulberry shoots grew well when the mulberry branches were cut down, in hight, 1/3, $\frac{1}{2}$ and 2/3 of them, respectively, just before the Spring budding. The results obtained are as follows: 1. The rate of un-sprouted buds decreased sharply down as much as half of the control if the mulberry branches were cut off. The treatment, 1/3, was best one of various cut down sizes and the un-sprouted buds concentrated on the lower parts of the branches. 2. Even though the branches were cut down, at first it seemed flat to accelerate the sprouting of buds, but rather to have a tendency to become late. The speed of leaf growth, however, became faster after the sprouting. It took 7~9 days from the beginning of buddings to the 5th full grown leaf, and.7 days for the shortest one in the treatment, 2/3, when compared with 16 days of the control. 3. If the branches were cut down, the growth of the new sprouts was accelerated. For 45 days (on 5th of May to on 10th of June), therefore. the shoots had grown up to 1.6～2.5 times of the control, 34cm long. The shoots of which the branches were cut down at 2/3 of them were longest (83cm). Furthermore. the speed of shoot growth of cut-down branches was faster than that of the control. 4. In the increased rate of the number of the mulberry leaves, there was not significant difference between the control and the treatments. 5. The total amount of shoot growth showed considerably much more in the treatments than in the control. The successing growing shoots of treatment, 2/3 were little in a number but longest per one shoot in mean shoot length. 6. It seems to be much available that we may cut down branches at 2/3 of them in order to get the scions for the cutting as soon as possible.

• Journal of Ginseng Research
• /
• v.35 no.3
• /
• pp.360-367
• /
• 2011

In this study, we investigated the effects of total ginseng saponin (TGS) on the cutaneous wound healing process using histological analysis. A total of 24 ICR mice, 5-weeks-old, were used for all in vivo experiments. Mice were divided into control and TGS-treated groups and four equidistant 1-cm full-thickness dorsal incisional wounds were created. The wounds were extracted at days 1, 3, 5, and 7 post-injury for histomorphometrical analysis including wound area and contracture measurements, keratinocyte migration rate, and calculation of infiltrating inflammatory cells. The results showed that the wound area was smaller and keratinocyte migration rate was higher in the TGS-treated group than that of the control group from days 3 to 7. Inflammatory cells in the TGS-treated group at days 1 and 3 were reduced compared to the control group. Wound contraction in the TGS-treated group was greater than in the control group on days 3 to 5, and collagen deposition in the TGS-treated group was higher than in the control group during wound healing. The results indicate a beneficial effect of TGS when used to treat skin wounds.

• The Korean Journal of Zoology
• /
• v.30 no.1
• /
• pp.1-9
• /
• 1987

Cyclic AMP (cAMP) was known to play a key role in the regulation of cumulus expansion and oocyte maturation of mammalian cumulus-oocyte complexes (COC's) in vivo and in vitro. The present experiments were conducted to know how intracellular level of cAMP in these cells is controlled. Intracellular cAMP level was modulated by culturing mouse CGC's with an adenylate cyclase stimulator, forskolin, a phosphodiesterase inhibitor, 3-isobutyl-1-methyixanthine (IBMX), human chorionic gonadotrophin (HCG), or follicle stimulating hormone (FSH). The rate of cumulus expansion and germinal vesicle break-down (GVBD) was checked after culture and used as a biological end point. Forskolin in the medium began to stimulate the expansion of the complexes at 1 nM and induced maximum expansion (80~90%) at 0 1~10 $\mu$M. The expansion rate was reduced to 60% when forskolin concentration was increased to 100 $\mu$M. Oocyte GVBD occurred normally (75~82%) in the presence of 10 $\mu$M of forskolin, but partial suppression was appeared at 100 pM of the drug (40%). IBMX also stimulated the expansion from the concentration of 0.01 pM and induced full expansion (81~89%) between the concentration of 1-1000 $\mu$M. Meiotic resumption was occurred normally under 10 $\mu$M of IBMX, but suppressed drastically from the concentration of 100 $\mu$M. The minimum exposing time to hormone or drugs required to trigger cumulus expansion was two minutes with HCG, 15~30 minutes with FSH and fors kolin, and two hours with IBMX. The data presented here seemed to imply that intracellular cAMP level in cumulus cells is regulated by both adenylate cyclase and phosphodiesterase and cumulus expansion is induced by a peak of cAMP while meiotic arrest is maintained by continuous presence of cAMP.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.5_6
• /
• pp.249-256
• /
• 2007

GPS(generalized processor sharing) is a fair scheduling scheme that guarantees fair distribution of resources in an instantaneous manner, while virtual clock pursues fairness in the sense of long-term. In this paper, we notice that the degree of memorylessness is the key difference of the two schemes, and propose a unified scheduling model that covers the whole spectrum of history-sensitiveness. In this model, each application's resource right is represented in a value called deposit, which is accumulated at a predefined rate and is consumed for services. The unused deposit, representing non-usage history, gives the application more opportunity to be scheduled, hence relatively enhancing its response time. Decay of the deposit means partial erase of the history and, by adjusting the decaying rate, the degree of history-sensitiveness is controlled. In the spectrum, the memoryless end corresponds GPS and the other end with full history corresponds virtual clock. And there exists a tradeoff between average delay and long-term fairness. We examine the properties of the model by analysis and simulation.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.347-354
• /
• 2014

Korea Central Cancer Registry reported in 2011 that the prevalence rate of thyroid cancer was about 19.6% (the highest) in both men and women. The ratio of thyroid cancer, among cancers that women suffer from, was about 31.1%, the highest among female cancers and about five times more than men. Regarding the incidence of thyroid cancer by age group, the crude rate was highest in women and men aged 15~34. From these figures it can be inferred that there is a greater relationship between thyroid cancer and hormones compared with other cancers. Therefore, young women aged 20~25, even if they are in full health, should undergo a medical examination. This study is aimed at examining changes in thyroid gland detected through self evaluation tests and the analysis of ultrasound screening images in persons aged 20~25. According to the study, 213 persons (about 46.6%) out of 457 people who took part in the study had abnormal echo patterns. With regard to women's abnormal patterns, about 73.4% of them were found to have calcified cystic, 11.8% diffuse-type low-echo and 7.3% cystic echo. With regard to male participants, about 61.1% were found to have calcified cystic, followed by 19.4% with the size of the isthmus increased and 13.9% with diffuse-type low-echo. According to the outcomes of an analysis regarding self-testing for hyperthyroidism, the average points of participants who were found to have abnormal echo patterns in ultrasound tests were 6.85 and the figure was 5.88 in persons with normal patterns. The figure was about 15% higher in abnormal respondents.

• Radiation Oncology Journal
• /
• v.8 no.2
• /
• pp.177-182
• /
• 1990

From 1984 to 1988, fourty two patients with nasopharyngeal cancer were treated at the Department of Radiation Oncology in Kyungpook National University Hospital. Thirteen patients refused treatment and the median survival time was 7.8 months. Twenty nine patients received a full course of radiation at least 70 Gy to the primary site and 60 Gy to the nodal sites. These patients were all belonged to stage III or IV, The local control rate was $75\% in squamous cell carcinomas, and all the patients with lymphoepithelioma showed a complete response. Overall locoregional failure was $27.6\%. Distant metastasis was the predominant pattern of failures; 4/6 in lymphoepithelioma, 4/10 En squamous cell carcinoma. The Three-year-survival rate for squamous cell carcinoma was $40.5\%$, and for lymphoepithelioma $25.9\%, respectively. This may be due to the more frequent distant metastases in lymphoepithelioma and ineffective chemotherapy. No survival correlation was found with the level of neck node involvement. Though adjuvant chemotherapy was found to be of no benefit in overall survival, more prudent and aggressive chemotherapy would be necessary.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.585-592
• /
• 2010

This study was conducted to investigate the effect of 1-MCP, an ethylene action inhibitor, and several postharvest treatments including ethylene scrubbing on fruit quality and respiration for keeping marketability in 'Janhowon Hwangdo' peach ($Prunus$ $persica$ Batsch). 1-MCP at the rate of $1.0{\mu}L{\cdot}L^{-1}$ showed best results in maintenance of fruit firmness and external appearance such as skin color. The ethylene production was strongly reduced by 1-MCP treatment at 0.5 or $1.0{\mu}L{\cdot}L^{-1}$ but respiration rate was only suppressed at $1.0{\mu}L{\cdot}L^{-1}$ during 6 days of shelf life at $20^{\circ}C$. Mature fruits (harvested 1 week before full commercial maturity) were much highly responsive to $1.0{\mu}L{\cdot}L^{-1}$ of 1-MCP compared to those of commercial maturity. At the concentration of $0.5{\mu}L{\cdot}L^{-1}$ of 1-MCP did not affect fruit marketability compared to untreated control. Beneficial effects of carbon ceramic as an ethylene scrubber were also found such as delay of firmness loss and deterioration of external appearance at $10^{\circ}C$, but these positive effects on fruit quality remained for only 5 days. The application of ethylene scrubber on the shipping carton boxes was effective on keeping firmness of immature fruit pretreated with 1-MCP when compared with mature fruit.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.960-968
• /
• 2003

A bacterial isolate showing a strong endochitosanase activity was isolated from soil and then characterized. The isolate was identified and designated as Bacillus cereus P16, based on morphological and biochemical properties, assimilation tests, cellular fatty acids pattern, along with 16S rRNA gene sequence. The optimized medium for producing extracellular chitosanase in a batch culture contained 1% tryptone, 0.5% chitosan, and 1% NaCl (pH 7.0). Powder chitosan and tryptone served the best as carbon and nitrogen sources, respectively, for the chitosanase production. Chitosanase activity was the highest when culture was completed at $37^{\circ}C$ among various temperatures ($20-42^{\circ}C$) tested in a shaking incubator (200 rpm). The levels of chitosanase activity in the culture fluid were 2.0 U/ml and 3.8 U/ml, respectively, when incubated in a flask for 60 h and in a jar fermenter for 24 h. The culture supernatant showed a strong liquefying activity on the soluble chitosan. The viscosity of 1% chitosan solution, that was incubated with the culture supernatant, was rapidly decreased, suggesting the secretion of endochitosanolytic enzymes by P16. The culture fluid revealed six endo-type chitosanase isozymes, two major (38 and 45 kD), and four minor (54, 65, 82, and 96 kD) forms by staining profile. The crude enzymes were very stable, and full activity was maintained for 4 weeks at $4^{\circ}C\;or\;-20^{\circ}C$ in the culture supernatant, suggesting a highly desirable stability rate for making an industrial application of the crude enzymes. The supernatant also cleaved the insoluble chitosan powder, but the hydrolysis rate was much lower. The enzymic degradation products of chitosan contained $(GlcN)_n$ (n=2-8). The concentration of chitosan in the reaction mixture of the crude enzyme affected the chitooligosaccharides composition of the hydrolysis products. When the higher concentration of chitosan was used, the higher degree of polymerized chitooligosaccharides were produced. By comparison with other commercial chitosanase preparations, P16 was indeed found to be a valuable enzyme source for industrial production of chitooligosaccharides from chitosan.

• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.106-112
• /
• 2015

This experiment was carried out to investigate the best spray timing for the control of the bacterial shot hole with Bordeaux mixture (6-6) after wintering in the peach orchard. We sprayed Bordeaux mixture (6-6) on 'Mibaekdo', 'Yumyeong' and 'Cheonhong' of peach verities from late-March to mid-April in 2001, 2002 and 2014, and examined how much bacterial shot hole and chemical injure occurred. The infection rate of bacterial shot hole according to spray time was 10.2 to 11.7% at leaves, and 1.7 to 2.2% at fruits in 2002. And Efficacy of the Bordeaux mixture treatment for control of bacterial shot hole at full blooming time 21.2 to 30.4% at leaves, 1.7 to 4.4% at fruits in 2014. The chemical injure occurred slightly for one week hence. The fruit bearing rate was 20.7 to 29.8% at 'Mibaekdo', and 35.4 to 61.9% at 'Yumyeong' peach trees. When the spray at the time of blooming period by bordeaux mixture was investigated the control effect of bacterial shot hole disease. The infected leaves was better than 21 to 25% twice the quantity of finished products and bordeaux self-preparation about 28 to 30% base quantity of finished products, also the control efficacy was higher in infected fruits trends in bordeaux self-preparation method and twice the quantity of finished products.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.799-813
• /
• 2020

Fatigue cracks of rib-to-deck (RD) joints have been frequently observed in the orthotropic steel decks (OSD) using conventional U-ribs (CU). Thickened edge U-rib (TEU) is proposed to enhance the fatigue strength of RD joints, and its effectiveness has been proved through fatigue tests. In-depth full-scale tests are further carried out to investigate both the fatigue strength and fractography of RD joints. Based on the test result, the mean fatigue strength of TEU specimens is 21% and 17% higher than that of CU specimens in terms of nominal and hot spot stress, respectively. Meanwhile, the development of fatigue cracks has been measured using the strain gauges installed along the welded joint. It is found that such the crack remains almost in semi-elliptical shape during the initiation and propagation. For the further application of TEUs, the design curve under the specific survival rate is required for the RD joints using TEUs. Since the fatigue strength of welded joints is highly scattered, the design curves derived by using the limited test data only are not reliable enough to be used as the reference. On this ground, an experiment-numerical hybrid approach is employed. Basing on the fatigue test, a probabilistic assessment model has been established to predict the fatigue strength of RD joints. In the model, the randomness in material properties, initial flaws and local geometries has been taken into consideration. The multiple-site initiation and coalescence of fatigue cracks are also considered to improve the accuracy. Validation of the model has been rigorously conducted using the test data. By extending the validated model, large-scale databases of fatigue life could be generated in a short period. Through the regression analysis on the generated database, design curves of the RD joint have been derived under the 95% survival rate. As the result, FAT 85 and FAT 110 curves with the power index m of 2.89 are recommended in the fatigue evaluation on the RD joint using TEUs in terms of nominal stress and hot spot stress respectively. Meanwhile, FAT 70 and FAT 90 curves with m of 2.92 are suggested in the evaluation on the RD joint using CUs in terms of nominal stress and hot spot stress, respectively.