• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.139-142
• /
• 2003

Traditionally, the thickness of fire protection materials of structural elements such as beam and column have been decided by fire test using the predominant steel section of $H-300{\times}300{\times}10{\times}15$ for column and $H-400{\times}200{\times}8{\times}13$ for beam in Korea. But this way of determination of fire protection thickness yields very unduly results. Because the temperature-increment rate of structural steel elements depends mainly on magnitude of their cross-areas. In general, the thicker size of cross-areas for structural elements, the lower temperature shows up. It had already proved that the fire protection thickness only depends on the size of cross-areas and the fire protection method for three-fide or four-side exposed conditions in European countries, the United State of America and so on. To demonstrate there would be differences among various cross-areas for structural elements, we conducted several fire tests with full-scale specimens of beams and columns. For the determination of critical temperature for steel section when the fire resistant performance is needed to be decided, we conducted with a loaded fire test for beam and column, respectively. The small column in 1.0 meter length and beam in 1.5 meter length were used in order to deprive the rational fire protection thickness of structural elements such as beam and column, respectively. After test, we could obtain there were significant temperature lass between higher cross-areas and lower cross-areas. The critical temperature of steel as a criterion is used 538$^{\circ}C$ for column and 593$^{\circ}C$ for beam which is from ASTM E 119 because we don't make provisions as critical temperature by elements. We could consider that the best way of determination of fire protection thickness is using the following multi-regression equation which was deprived from several fire tests using the concept of section factor, FR(column) = 0.17 +5191.49t A/Hp + 40.77t, FR(beam) = 0.25 +6899.31t A/Hp + 32.60t(where, FR means fire resistant time, t means thickness, A means cross-area and Hp means heated parameter).

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.103.1-103.1
• /
• 2011

Recent observations by Hinode show weakly-attenuated coronal loop oscillations in the presence of background flow (Ofman & Wang 2008, A&A, 482, L9). We study the vertical kink oscillations in solar coronal loops, considering field aligned flows inside the loops as well as surrounding the loops environment. The two dimensional numerical model of straight slab is used to explore the excitation and attenuation of the impulsively triggered fast magnetosonic standing kink waves. A full set of time dependent ideal magnetohydrodynamics equations is solved numerically taking into account the value of flow of the order of observed flows detected by SOT/Hinode. We find that relaxing the assumption of the limited flows within the loops enhances the damping rate of the fundamental mode of the standing kink waves by 2 - 3 % as compared to flow pattern which is basically localized within the loops. We further notice that extending the flow pattern beyond the loop thickness also enhances the strength of the shock associated with slow magnetoacoustic waves, recognized as an addition feature detected in the numerical simulation. The wider out-flow pattern destroys the oscillation patterns early as compared to narrower flow pattern, in other words we can say that it affects the durability of the oscillation. However, for the typical coronal loops parameters we find that the observed durability periods of the SOT/Hinode observation can be achieved with an out-flow Gaussian patterns for which half-width is not greater than factor 2.0 of the loop-half-width. explain a possible relation between electric current structure and sigmoid observed in a preflare phase.

• Tuberculosis and Respiratory Diseases
• /
• v.73 no.2
• /
• pp.100-106
• /
• 2012

Background: There are a plethora of literatures showing that high-intensity intensive care unit (ICU) physician staffing is associated with reduced ICU mortality. However, it is not widely used in ICUs because of limited budgets and resources. We created a critical care team (CCT) to improve outcomes in an open general ICU and evaluated its effectiveness based on patients' outcomes. Methods: We conducted this prospective, observational study in an open, general ICU setting, during a period ranging from March of 2009 to February of 2010. The CCT consisted of five teaching staffs. It provided rapid medical services within three hours after calls or consultation. Results: We analyzed the data of 830 patients (157 patients of the CCT group and 673 patients of the non-CCT one). Patients of the CCT group presented more serious conditions than those of the non-CCT group (acute physiologic and chronic health evaluation II [APACHE II] 20.2 vs. 15.8, p<0.001; sequential organ failure assessment [SOFA] 5.5 vs. 4.6, p=0.003). The CCT group also had significantly more patients on mechanical ventilation than those in the non-CCT group (45.9% vs. 23.9%, p<0.001). Success rate of weaning was significantly higher in the CCT group than that of the non-CCT group (61.1% vs. 44.7%, p=0.021). On a multivariate logistic regression analysis, the increased ICU mortality was associated with the older age, non-CCT, higher APACHE II score, higher SOFA score and mechanical ventilation (p<0.05). Conclusion: Although the CCT did not provide full-time services in an open general ICU setting, it might be associated with a reduced ICU mortality. This is particularly the case with patients on mechanical ventilation.

• Solar Energy
• /
• v.18 no.3
• /
• pp.197-203
• /
• 1998

A 5 ton/day pilot scale two-phase anaerobic digester was constructed and tasted to treat Korean food wastes in Anyang city. The process was developed based on 3 years of lab-scale experimental results on am optimim treatment method for the recovery of biogas and humus. Problems related to food waste are ever Increasing quantity among municipal solid wastes(MSW) and high moisture and salt contents. Thus our food waste produces large amounts of leachate and bed odor in landfill sites which are being exhausted. The easily degradable presorted food waste was efficiently treated in the two-phase anaerobic digestion process. The waste contained in plastic bags was shredded and then screened for the removal of inert material such as fabrics and plastics, and subsequently put into the two-stage reactors. Heavy and light inerts such as bones, shells, spoons and plastic pieces were again removed by gravity differences. The residual organic component was effectively hydrolyzed and acidified in the first reactor with 5 days space time at pH of about 6.5. The second, methanization reactor part of which is filled with anaerobic fillters, converted the acids into methane with pH between 7.4 to 7.8. The space time for the second reactor was 15 days. The effluent from the second reactor was recycled to the first reactor to provide alkalinities. The process showed stable steady state operation with the maximum organic rate of 7.9 $kgVS/m^3day$ and the volatile solid reduction efficiency of about 70%. The total of 3.6 tons presorted MSW containing 2.9 tons of food organic was treated to produce about $230m^3$ of biogas with 70% of methane and 80kg humus. This process is extended to full scale treating 15 tons of food waste a day in Euiwang city and the produced biogas is utilized for the heating/cooling of adjacent buildings.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.189-193
• /
• 2012

ZnO nanorods were grown on the $Cd_xZn_{1-x}O$ seed layers with various Cd mole fractions by hydrothermal method. The effects of the Cd mole fraction for $Cd_xZn_{1-x}O$ seed layers on the structural and optical properties of the ZnO nanorods were investigated by scanning electron microscopy, X-ray diffraction, and photoluminescence. The narrowest full-width at half-maximum and largest grain size of the $Cd_xZn_{1-x}O$ seed layers, indicating improvement in crystal quality, were observed at the Cd mole fraction of 0.5. At the Cd mole fraction of 0.5, the largest enhancement in the density, the crystal quality, and the growth rate of the ZnO nanorods was observed while their appearance was not affected significantly by the incorporation of the Cd in the $Cd_xZn_{1-x}O$ seed layers. Consequently, the luminescent properties of the ZnO nanorods were enhanced. The largest improvement in the structural and optical properties of the ZnO nanorods was observed at the Cd mole fraction of 0.5.

• Safety and Health at Work
• /
• v.11 no.1
• /
• pp.88-96
• /
• 2020

Background: The current lack of the number of nurses and high nurse turnover rate leads to major problems for the health-care system in terms of cost, patient care ability, and quality of care. Theoretically, burnout may help link emotional labor with turnover intention. The purpose of this study was to investigate the mediating effect of burnout in the association between emotional labor and turnover intention in Korean clinical nurses. Methods: Using data collected from a sample of 606 nurses from six Korean hospitals, we conducted a multiple regression analysis to determine the relationships among clinical nurses' emotional labor, burnout, and turnover intention, looking at burnout as a mediator. Results: The results fully and partially support the mediating role of burnout in the relationship between the subfactors of emotional labor and turnover intention. In particular, burnout partially mediated the relationship between emotional disharmony and hurt, organizational surveillance and monitoring, and lack of a supportive and protective system in the organization. In addition, we found that burnout has a significant full mediation effect on the relationship between overload and conflicts in customer service and turnover intention. Although the mediating effect of burnout was significantly associated with the demands and regulation of emotions, no significant effects on turnover intention were found. Conclusion: To reduce nurses' turnover, we recommend developing strategies that target both burnout and emotional labor, given that burnout fully and partially mediated the effects of emotional labor on turnover intention, and emotional labor was directly associated with turnover intention.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.259-264
• /
• 1995

To elucidate the effect on the quality of products, various components of ume fruit(Prunus mume)flesh of six species during development and maturation. The weigh and the rate of flesh of ume fruit was increased until maturation, except of small ume. The relative hardness of ume fruit flesh was 2.5~3.9 Kg and decreased at full ripe. The major organic acids of ume fruit flesh was citric acid and malic acid. Citric acid became increased, but malic acid was decreased during maturation and total content of that was increased during maturation Free sugars determined from the ume fruit flesh were fructose, glucose, sucrose. Ascorbic acid content was $0.6\sim2mg%$ in the ume fruit flesh. The contents of K and Ca were abundant minerals in ume fruit flesh.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.187-187
• /
• 2013

양자점(Quuantum dot, QD)은 0차원 특성을 가지는 구조로 양자 구속 효과로 인하여 bulk와 는 다른 구조적, 광학적, 전기적 특성을 가지고 있다. InAs QD는 size와 barrier의 bandgap 조절을 이용하여 쉽게 bandgap을 바꿀 수 있는 장점이 있어 solar cell, semiconductor laser diode, infrared photodetector 등으로 많은 연구가 이루어지고 있다. 일반적으로 Stranski-Krastanov (SK) mode로 성장한 InAs QD는 보통 GaAs epilayer와의 lattice mismatch (7%)를 이용하여 성장을 하고 이로 인하여 strain을 가지고 있고 QD의 density와 stack이 높을수록 strain이 커진다. 하지만 sub-monolayer (SML) QD 같은 경우 wetting layer가 생기는 지점인 1.7 ML이하에서 성장되는 성장 방식으로 SK-QD보다는 작은 strain을 가지게 된다. 또 QD의 size가 작아 SK-QD보다 큰 bandgap을 가지고 있다. 본 연구에서는 분자선 에피택시(molecular beam epitaxy, MBE)를 이용하여 semi-insulating GaAs substrate 위에 InAs QD를 0.5/1/1.5/1.7/2/2.5 monolayer로 성장을 하였다. GaAs과 InAs의 성장온도와 성장속도는 각각 $590^{\circ}C$, 0.8 ML/s와 $480^{\circ}C$, 0.2 ML/s로 성장을 하였으며 적층사이의 interruption 시간은 10초로 고정하였고 10주기를 성장하였다. Photoluminescence (PL)측정 결과 SML-QD는 size에 따라서 energy가 1.328에서 1.314 eV로 약간 red shift를 하였고 SK-QD의 경우 1.2 eV의 energy정도로 0.1 eV이상 red shift 하였다. 이는 QD size에 의하여 energy shift가 있다고 사료된다. 또 wetting layer의 경우 1.41 eV의 energy를 가지는 것으로 확인 하였다. SML-QD는 SK-QD 보다 반치폭(full width at half maximum, FWHM)이 작은 것은 확인을 하였고 strain field의 감소로 해석된다. 하지만 SML-QD의 경우 SK-QD보다 상대적으로 작은 PL intensity를 가지고 있었다. 이를 개선하기 위해서는 보다 높은 QD density를 요구하게 되는데 growth temperature, V/III ratio, growth rate 등을 변화주어서 연구할 계획이다.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.50-55
• /
• 1995

This study was conducted to determine the optimum conditions for induction and different somatic of somatic embryos as well as germination of encapsulated and stored somatic embryos. Somatic embryos was better formed in 1/2X MS medium than full - strength MS medium. 0.1 to 1.0mg/lBA and kinetin promoted shoot differentiation of somatic embryos. Higher concentration tend to inhibit differentiation. IAA affect positively both root and shoot growth. In vitro germination of somatic embryos encapsulated with 2% alginate matrix containing 1/2 MS nutrient medium and $AgNO_3$ 5mg/l was 86%. Storage of somatic embryos was effecive at $5^{\circ}C$ but the germination rate decreased with longer storage period. RAPD analyses with plants regenerated from the somatic embryos showed DNA polymorphism, indicating abolition of primer binding site by point mutation, deletion, or insertion of certain sequences.

• Clinical and Experimental Pediatrics
• /
• v.59 no.4
• /
• pp.165-173
• /
• 2016

Purpose: To identify the effects of modified parenteral nutrition (PN) and enteral nutrition (EN) regimens on the growth of very low birth weight (VLBW) infants. Methods: The study included VLBW infants weighing <1,500 g, admitted to Chungnam National University Hospital between October 2010 and April 2014, who were alive at the time of discharge. Subjects were divided according to 3 periods: period 1 (n=37); prior to the PN and EN regimen being modified, period 2 (n=50); following the PN-only regimen modification, period 3 (n=37); following both PN and EN regimen modification. The modified PN regimen provided 3 g/kg/day of protein and 1 g/kg/day of lipid on the first day of life. The modified EN regimen provided 3.5-4.5 g/kg/day of protein and 150 kcal/kg/day of energy. We investigated growth rate, anthropometric measurements at 40 weeks postconceptional age (PCA) and the incidence of extrauterine growth restriction (EUGR) at 40 weeks PCA. Results: Across the 3 periods, clinical characteristics, including gestational age, anthropometric measurements at birth, multiple births, sex, Apgar score, surfactant use and PDA treatment, were similar. Growth rates for weight and height, from time of full enteral feeding to 40 weeks PCA, were higher in period 3. Anthropometric measurements at 40 weeks PCA were greatest in period 3. Incidence of weight, height and head circumference EUGR at 40 weeks PCA decreased in period 3. Conclusion: Beginning PN earlier, with a greater supply of protein and energy during PN and EN, is advantageous for postnatal growth in VLBW infants.