• 동력기계공학회지
• /
• 제15권1호
• /
• pp.5-10
• /
• 2011

The spatial fuel vapor distribution of the homogeneous charge by a 6-hole injector was examined in a optically accessed single cylinder direct injection spark ignition(DISI) engine. The effects of in-cylinder charge motion, and fuel injection pressure, and coolant temperature were investigated using a planar LIF (Laser Induced Fluorescence) technique. It was confirmed that the in-cylinder tumble flow played a little more effective role in the spatial fuel vapor distribution than the swirl flow during the compression stroke at 10 mm and 2 mm planes under cylinder head gasket and the increased fuel injection pressure activated spatial distributions of the fuel vapor. In additions, richer mixtures were concentrated around the cylinder wall by the increase of the coolant temperature.

• 청정기술
• /
• 제7권4호
• /
• pp.243-250
• /
• 2001

연료전지는 환경 친화적 대체에너지로 지속적인 연구가 이루어지고 있다. 최근에는 연료전지의 실용화를 위해 적층, 대면적화에 대한 기본 기술이 중요시되고 있다. 그러나 연료전지중 가장 많은 기술적 발전을 이룬 인산형 연료전지에 관해서도 연료전지 설계의 기초자료가 되는 스택의 온도 분포에 대한 연구는 거의 발표되지 않았다. 본 연구에서는 인산형 연료전지 스택의 온도 분포를 전산모사하였다. 이를 통하여 여러 작동 조건에서 스택의 온도 분포를 알아내었으며, 스택 운전시 적절한 온도 측정 위치를 예측할 수 있었다. 또한 냉각단의 유로를 변경하여 전산모사를 수행한 결과 스택 내부의 온도 분포의 표준 편차를 약 50% 감소시키는 효과적인 냉각 디자인을 제안할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제13권1호
• /
• pp.83-89
• /
• 2002

The goal of this research is to understand the NOx emission in direct injected diesel engine with premixed hydrogen fuel. Hydrogen fuel was supplied into the test engine through the intake pipe. Amount of hydrogen-supplemented fuel was 70 % basis on heating value of the total input fuel. The effects of intake air temperature and exhaust gas recirculation(EGR) on NOx emission were studied. The intake air temperatures were varied from $23^{\circ}C$ to $0^{\circ}C$ by using liquid nitrogen. Also, the exhaust gas was recirculated to the intake manifold and the amount of exhaust gas was controlled by the valve. The major conclusions of this work include: ( i ) nitrogen concentrations in the intake pipe were increased by 30% and cylinder gas temperature was decreased by 24% as the intake air temperature were changed from $23^{\circ}C$ to $0^{\circ}C$; ( ii ) NOx emission per unit heating value of supplied fuel was decreased by 45% with same decrease of intake air temperature; and (iii) NOx emission was decreased by 77% with 30% of EGR ratio. Therefore, it may be concluded that EGR is effective method to lower NOx emission in hydrogen fueled engine.

• Nuclear Engineering and Technology
• /
• 제22권2호
• /
• pp.116-127
• /
• 1990

SPEAR-BETA코드에서 사용된 핵분열 기체 방출 모델을 핵연료와 피복관 사이의 갭(gap)과 플레넘(plenum) 사이에서 축방향 핵분열 기체 혼합과 균열된 핵연료에 대한 유효 열전도도를 사용함으로써 개량하여, P$_{max}$와$\Delta$P가 변하는 다양한 출력 감발 조건하에서 핵분열기체 방출 거동을 해석하였다. 핵연료 균열의 영향을 고려한 유효 열전도도는 핵연료의 온도 분포와 내부 기체 압력을 계산하는데 사용되었고, 축방향 기체 유동으로 인한 혼합(mixing)과 회석(dilution)효과는 갭의 폭과 열전도도를 해석하는데에 고려되었다. 축방향 기체 유동 효과를 계산하는데 있어서 계산속도를 빠르게 하기 위하여 유한차분법의 하나인 Crank-Nicholson 방법을 사용하였다. 개량된 모델은 다양한 출력 감발 조건하에서 얻어진 실험 자료들과 SPEAR-BETA와 FEMAXl-IV 코드들에서 사용되는 모델들로부터 얻은 결과들을 비교함으로써 검증하였다. 개량된 모델의 결과는 위의 두 코드로부터 얻은 결과 보다는 실험자료들과 잘 일치하였다. 균열된 핵연료에 대해 유효 열전도도를 사용하여 계산한 핵연료의 중심 온도는 균열되지 않은 핵연료의 경우에 비해 20$0^{\circ}C$ 정도보다 높은 값을 나타냈고, 개량된 핵분열 기체 생성물의 분율은 SPEAR-BETA코드에서 얻은 값보다 평균 6% 정도가 높게 나타났다.평균 6% 정도가 높게 나타났다.다.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.128-135
• /
• 2008

EGR(exhaust gas recirculation) is considered as a most effective method to reduce the NOx emissions. But high EGR tolerance is always pursued not only for its advantages of the pumping loss reduction and fuel economy benefit in Gasoline-Hybrid engine. However, the occurrence of excessive cyclic variation with high EGR normally prevents substantial fuel economy improvements from being achieved in practice. Therefore, the optimum EGR rate should be carefully determined in order to achieve low fuel consumption and low exhaust emission. In this study, 2 liters gasoline engine with E-EGR system was used to investigate the effects of EGR on fuel efficiency, combustion stability, engine performance and exhaust emissions. With optimal EGR rates, the fuel consumption was improved by 4%. This improvement was achieved while a reduction in NOx emissions of 75% was accomplished. Increase of EGR gas temperature causes the charge air temperature to affect the knock phenomenon and moreover, the EGR valve lift changes for the same control signal.

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.73-84
• /
• 2003

항공기내 연료온도의 변화가 유한차분식에 의하여 해석되었다. 항공기의 여러 임무 가운데 근접항공지원 임무가 20% hot day 외부대기 조건과 함께 이음속 영역에서 고려되었다. 수정 Dufort-Frankel기법의 explicit방법에 의해 수치계산이 수행되었다. 항공기는 난류유동장내에 있는 것으로 가정되었다. 추가 연료공급-회송 개념을 갖는 항공기 연료시스템 모델이 고려되었다. 본 해석의 결과로써, 추가연료 공급이 증가함에 따라 연료탱크의 온도는 상승함을 보인 반면, 엔진 입구에서의 연료온도는 몇몇 비행단계 및 엔진 연료요구량이 많은 구간을 제외하고는 감소함을 보였다. 본 해석으로부터, 추가 연료공급-회송개념을 사용한 연료시스템이 엔진입구 연료온도를 낮추기 위한 효과적인 방법임을 나타났다. 또한, 연료/오일 열교환기로 흐르는 연료유동량이 연료온도 변화에 중요한 인자임이 밝혀졌다.

• 한국연소학회지
• /
• 제11권4호
• /
• pp.14-21
• /
• 2006

In this study, syngas which is reformed from fossil fuel and has hydrogen as a major component, was added to a gasoline engine to improve combustion stability and exhaust emissions of idle state. Syngas fraction of the total supplied fuel varied to 0 %, 25 %, 50 % with various ignition timing and excess air ratio. Combustion stability, exhaust emissions, fuel consumption and exhaust gas temperature were measured to investigate the effects of syngas addition on idle performance. Results showed that syngas has ability to widely extend lean operation limit and ignition retard range with dramatical reduction of engine out emissions. It is supposed that the usage of syngas in the internal combustion engine is an effective solution to meet the future strict emission regulations.

• 한국연소학회지
• /
• 제21권3호
• /
• pp.7-15
• /
• 2016

The fuel in conventional liquid fuel combustor is atomized by spray method for high efficiency and low emissions. To improve the overall fuel efficiency and lower pollutant emissions in liquid fuel combustion systems, the effective spatial and temporal separation of droplet evaporation from normal spray process is needed. In this paper, the recuperation of high temperature burnt gas for fuel evaporation was proposed to develop a cylindrical premixed combustor. The recuperation process using U shaped tube is effective to evaporate the liquid fuel. The results show that the flame mode is changed into red radiation flame, blue flame and lift off flame with decreasing equivalence ratio as gas fuel combustion mode. In particular, the blue flame is found to be very stable at heating load 9.2 kW and equivalence ratio 0.731. NOx was measured blow 105 ppm ($O_2$ zero base) from equivalence ratio 0.705 to 0.835. CO which is a very important emission index in liquid fuel combustor was observed below 5 ppm ($O_2$ zero base) under the same equivalence region.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.421-429
• /
• 1997

This study is theoretically examined the influences on the performance of diesel engine super¬charged by exhaust gas turbine with the change of excess air factor, admission ratio, total efficien¬cy of turbine and compressor, scavenging pressure ratio, and scavenging temperature. In this study, all calculations are carried out by computer, and the theoretical engine performance is com¬pared with the actual engine performance which is offered from engine manufacturer. Following results are acquired by this study. The mean effective pressure is increased with decrease of excess air factor or increase of scavenging pressure ratio. As the admission ratio or total efficiency of tur¬bine is increased, the mean effective pressure is increased but the specific fuel consumption is decreased. Mean calculation error compared with the actual engine performance is under 5 per¬cents, therefore, this calculation method can be used in the design of diesel engine.

• Journal of Biosystems Engineering
• /
• 제10권2호
• /
• pp.47-54
• /
• 1985

Performance of a screw press was investigated experimentally with soybeans of various temperatures in order to find out a proper temperature of soybean to extract the oil by the mechanical method. Crude oil extracted by the screw press was chemically analyzed to determine a level of processing the oil for the oil to be used as a fuel for a compression ignition engine. The crude oil was degummed and dried by a plant type laboratory experimental setup to decide whether the processes are effective to improve quality of the oil as a fuel. The degummed oil and the degummed and dried oil were also chemically analyzed and were compared with the crude oil and the commercially degummed and dried soybean oil. The results are as follows: 1. In extraction of soybean oil by a screw press, heating soybeans is effective to increase oil production and to decrease energy consumption of the press. A proper temperature of soybean to extract the oil by the press was determined as about $50^{\circ}C$. 2. Soybean oil production and electric energy consumption of the press are about 83 ml and 58 Wh per 1 kg of soybeans heated to about $50^{\circ}C$, respectively. 3. The quality of crude oil produced by the press is similar to that of the commercially degummed and dried oil. The crude oil does not need to be degummed or dried for use as an engine fuel.