• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.31-37
• /
• 2009

An ejector is a machine utilized for mixing fluid, maintaining a vacuum, and transporting fluid. The Ejector enhances system efficiency, are easily operated, have a mechnically simple structure, and do not require a power supply. Because of these advantages, the ejector has been applied to a variety of industrial fields such as refrigerators, power plants and oil plants. In this work, an ejector was used to safely recycle anode tail gas in a 5 kW Molten Carbonate Fuel Cell system at KEPRI(Korea Electric Power Research Institute). In this system, the ejector is placed at mixing point between the anode tail gas and the cathode tail gas or the fresh air. Commercial ejectors are not designed for the actual operating conditions for our fuel cell system. A new ejector was therefore designed for use beyond conventional operating limits. In this study, the entrainment ratio is measured according to the diametrical ratio of nozzle to throat in the designed ejector. This helps to define important criteria of ejectors for MCFC recycling.

• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.107-111
• /
• 2011

해체의 최종단계는 대상 부지 및 건물을 규제로부터 제외하는 것이다. MARSSIM은 부지를 개방하기 위한 최종현황조사를 수행함에 있어 요구되는 자료의 수집 등의 다양한 요건을 만족키기 위한 총괄적인 지침을 제공한다. 연구로 해체 후 부지 및 건물의 최종현황조사를 위해 MARSSIM에서 제시하고 있는 방법을 적용하였다. 연구로 부지의 특성을 반영한 개방기준을 도출하기 위해 RESRAD 및 RESRAD-Build 전산코드를 이용하여 부지 및 건물에 대해서 계산하였다. 부지 및 건물의 조사설계(Survey Design)를 위해서 잠재적 오염도 및 측정 결과를 활용하여 조사구역을 구분하였고, 개략조사 및 특성조사를 통해 수집된 다양한 결과에 기초하여 통계학적 검사를 통해 조사구역 별로 요구되는 시료의 수를 산정하게 된다. 측정된 결과에 기초하여 연구로 최종 개방기준에 만족하는 것으로 평가되었다.

• 방사성폐기물학회지
• /
• 제13권3호
• /
• pp.187-199
• /
• 2015

원전해체시장이 본격적으로 도래함에 따라 그에 따른 기술연구가 부각되고 있다. 그러한 기술 중 방사선 제염은 직접적인 원전해체 과정 중 가장 초반에 행해지는 작업으로 현장 근로자의 안전확보 및 폐기물 양 감소를 위해 수행되는 중요한 작업이다. 제염을 통해 폐기물 표면에 존재하는 방사선 물질을 제거하게 되는데 해체에 적용되는 제염기술은 보다 강한 매개체를 사용하거나 개선된 설비를 활용하여 표면층 제거 정도가 일반적인 제염보다 훨씬 크다. 따라서 제염 계획 수립시 다양한 관점에서 분석 방법이 필요하다. 본 연구에서는 제염기술 선정을 위해 고려해야 할 요인을 설명하였으며, 대표적인 제염기술 사례 분석을 통해 실제 기술 수행을 위해 원전 설비 내 제염 아이템 선정 및 제염 장비 활용을 위해 검토해야 할 사항을 제시하였다.

• International Journal of Safety
• /
• 제3권1호
• /
• pp.53-58
• /
• 2004

SMART-P is a promising advanced small and medium category nuclear power reactor. It is an integral type reactor with a sensible mixture of new innovative design features and proven technologies aimed at achieving a highly enhanced safety and improved economics. The enhancement of the safety and reliability is realized by incorporating inherent safety improving features and reliable passive safety systems. The improvement in the economics is achieved through a system simplification, and component modularization. Preliminary safety analyses on selected limiting accidents confirm that the inherent safety improving design characteristics and the safety system of SMART-P ensure the reactor's safety. SMART-P is an advanced integral pressurized water reactor. The purpose of this study is for the safety analysis of the steam generator module pipe break for the SMART-P. The integrity of the fuel rod is the major criteria of this analysis. As a result of this analysis, the safety of the RCS and the secondary system is guaranteed against the module pipe break of a steam generator of the SMART-P.

• 소음진동
• /
• 제5권1호
• /
• pp.95-106
• /
• 1995

Flow-induced vibration in heat exchanger (or fuel rod) in nuclar power plant can cause dynamic interactions between tubes and tube supports resulting in fretting-wear. To increase the reliability and design life of heat exchanger components, design criteria that establish acceptable limits of vibration and minimize fretting wear are necessary. The fretting-wear rate is dependent upon material combination, contact configuration, environmental conditions and tube-to tube support dynamic interaction. It is demostrated that the fretting -wear rate correlates well with tube-to-support contact force or work rate. The tube-to-support dynamic interaction, which consists of dynamic contact forces and tube motion, is used to relate single-span wear data to real heat exchanger configurations consisting of multi-span tube bundles. This paper describes the test facility to measure tube-to-support dynamic impact force and reports its dynamic characteristics through the four impact tests - a force transduces independent and external impact tests, central ring inside impact test and additional cylinder impact test. Through the tests the impact parameter change dependent upon the material difference of impacting ball is studied, and the impact parameters of Force Transducer Assembly components are measured. And also the dynamic behavior of Force Transducer Assembly is analyzed. The force measurement technique herein is shown to provide a reasonable measure of dynamic contact forces.

• Korean Chemical Engineering Research
• /
• 제61권2호
• /
• pp.328-339
• /
• 2023

Methanol steam reforming (MSR) is a promising method for hydrogen supplying as a critical step in hydrogen fuel cell commercialization in mobile applications. Modelling and understanding of the reactor behavior is an attractive research field to develop an efficient reformer. Three-layer feed-forward artificial neural network (ANN) and Box-Behnken design (BBD) were used to modelling of MSR process using the Cu-SiO₂ aerogel catalyst. Furthermore, impacts of the basic operational variables and their mutual interactions were studied. The results showed that the most affecting parameters were the reaction temperature (56%) and its quadratic term (20.5%). In addition, it was also found that the interaction between temperature and Steam/Methanol ratio is important on the MSR performance. These models precisely predict MSR performance and have great agreement with experimental results. However, on the basis of statistical criteria the ANN technique showed the greater modelling ability as compared with statistical BBD approach.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.582-594
• /
• 2016

그 동안 하이브리드 버스에 대한 연구로 플러그인 하이브리드, 직렬형, 병렬형 하이브리드 등에 대한 연구가 많이 진행되어져 왔다. 하지만 연구가 진행된 대부분의 차량들은 대형 버스이며 현재 국내에는 중형저상버스에 대한 연구는 전무한 실정이다. 또한 중형저상버스의 하이브리드화에 대한 연구 역시 미미한 실정이다. 본 논문은 MATLAB을 이용한 시뮬레이션을 통해 디젤 중형저상버스의 연비 평가를 수행하였으며, 이를 하이브리드화하였을 경우에 대한 최적의 용량 조합과 기어비를 제시하고 내연기관 시뮬레이션 연비 결과와 비교 분석하였다. 하이브리드화를 위한 구조로 전륜과 후륜이 독립적으로 동력을 전달하는 병렬형 하이브리드 시스템을 선택하였다. 동력원 용량 설계를 위해 목표 성능을 만족하는 요구파워를 계산하여 적용 가능한 동력원 용량 영역을 설계하였다. 설계 영역을 만족하는 각 단품들의 용량은 스케일링하여 구성하였으며, 엔진과 모터에 대한 동력 전달계의 용량 설계 알고리즘을 제시하고 동적 계획법을 이용하여 최적화를 수행하였다. 최종적으로 본 연구를 통해 내연기관 차량인 중형저상버스를 하이브리드화하였을 경우에 대한 연비 향상률과 최적의 동력원 용량, 기어비를 제시하였다.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.742-754
• /
• 2020

Zircaloy cladding oxidation is an important phenomenon for both design basis accident and severe accidents, because it results in cladding embrittlement and rapid fuel temperature escalation. For this reason during the last decade, many experts have been conducting experiments to identify the oxidation phenomena that occur under design basis accidents and to develop mathematical analysis models. However, since the study of design extension conditions (DEC) is relatively insufficient, it is essential to develop and validate a physical and mathematical model simulating the oxidation of the cladding material at high temperatures. In this study, the QUENCH-05 and -06 experiments were utilized to develop the best-fitted oxidation model and to validate the SPACE code modified with it under the design extension condition. It is found out that the cladding temperature and oxidation thickness predicted by the Cathcart-Pawel oxidation model at low temperature (T < 1853 K) and Urbanic-Heidrick at high temperature (T > 1853 K) were in excellent agreement with the data of the QUENCH experiments. For 'LOCA without SI' (Safety Injection) accidents, which should be considered in design extension conditions, it has been performed the evaluation of the operator action time to prevent core melting for the APR1400 plant using the modified SPACE. For the 'LBLOCA without SI' and 'SBLOCA without SI' accidents, it has been performed that sensitivity analysis for the operator action time in terms of the number of SIT (Safety Injection Tank), the recovery number of the SIP (Safety Injection Pump), and the break sizes for the SBLOCA. Also, with the extended acceptance criteria, it has been evaluated the available operator action time margin and the power margin. It is confirmed that the power can be enabled to uprate about 12% through best-estimate calculations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1115-1120
• /
• 2003

The recent tendency in the automobile industries is toward light weighting vehicle body to improve the problems by environmental pollution as well as improving fuel cost. The effective way to reduce the weight of vehicle body seems to be application of new materials for body structure and such trend is remarkable. Among the various materials for vehicle body, stainless steel sheet (for example, 301L and 304L), TRIP steel and cold rolled steel sheets are under the interests. However, in order to guarantee reliability of new material and to establish the long life design criteria of body structure, it is important and require condition to assess spot weldability of them and fatigue strength of spot welded lap joints which were fabricated under optimized spot welding condition. And, recently, a new issue in the design of the spot welded structure is to predict economically fatigue design criterion without additional fatigue tests. In general, for fatigue design of the spot-welded thin sheet structure, additional fatigue tests according to the welding condition, material, joint type, and fatigue loading condition are generally required. This indicates that much cost and time for it should be consumed. Therefore, in this paper, the maximum stresses at nugget edge of spot weld were calculated through nonlinear finite element analysis first. And next, obtained the ${\Delta}P-N_{f}$ relation through the actual fatigue tests on spot welded lap joints of similar and dissimilar high strength steel sheets. And then, the ${\Delta}P-N_{f}$ relation was rearranged in the ${\Delta}{\sigma}-N_{f}$ relation. From this ${\Delta}{\sigma}-N_{f}$ relation, developed the fatigue design technology for spot welded lap joints of them welded using the optimized welding conditions.

• 해양환경안전학회지
• /
• 제22권5호
• /
• pp.576-582
• /
• 2016

이산화탄소 배출량 제한을 의무화하는 EEDI, SEEMP 등의 국제협약에 대응하기 위하여 선박의 에너지 절감장치(ESD, Energy Saving Device) 관련 국내기술 대응이 절실하다. 본 연구는 국내 중소형 조선소의 주력선종 효율 향상의 ESD를 설계하기 위하여 유동특성 분석에 대한 연구이다. 프로펠러 상단으로 유입되는 유동을 개선하기 위하여 bare hull의 선미벌브 및 빌지 주변의 유동특성을 수치해석과 모형시험을 통하여 정성적으로 분석하였으며, 선저압력 지점의 개선 및 프로펠러 상단 유입의 선미 빌지 유동 제어를 위하여 선미벌브와 빌지 사이에 수직평판을 부착하였다. 선미 선체표면 압력회복으로 전저항이 약 3.04 % 감소하였으며, 프로펠러 상단 유동 제어를 통해 평균 공칭반류가 약 18.8 % 감소하였다.