• 한국조경학회지
• /
• 제26권3호
• /
• pp.104-117
• /
• 1998

Rising concern about climate change has evoked interest in the potential for urban vegetation to help reduce the level of atmospheric CO\sub 2\, a major heat-trapping gas. This study quantified the functio of home energy savings and carbon emission reduction by shading, evapotranspiration and windspeed reduction of urban vegetatioin in Chuncheon. Tree and shrub cover averaged approximately 13% in residential land. The effects of shading, evapotranspiration and windspeed reduction annually saved heating energy by 2.2% and cooling energy by 8.8%. The heating and cooling energy savings reduced carbon emissions by 3.0% annually. These avoided emissions equaled the amount of carbon emitted annually from fossil fuel consumption by a population of about 1,230. Carbon emission reduction per residential building was 55kg for detached buildings and 872 kg for multifamily buildings. Urban vegetation annually decreased heating and cooling energy cost by ￦1.1 billions, which were equivalent to annual savings of ￦10,000 savings and carbon emission reduction due to tree plantings in the wrong locations, while windspeed reduction had a great effect. Plantings fo large trees close to the west and east wall of buildings, full tree plantings on the north, and avoidance of shade-tree plantings or selection of solar-friendlytrees on the south were recommended to improve the function of building energy savings and carbon emission reduction by urban vegetation.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.450-458
• /
• 2012

최근 정부는 국가 온실가스를 효율적으로 감축시켜 국제적인 기후변화에 대응하기 위하여 여러 부문에서 기술개발을 진행 중에 있다. 이를 달성하기 위하여 정부는 화석연료를 대체하고 이산화탄소를 감축시키는 수단으로 바이오연료를 저탄소와 탄소중립자원으로 검토하고 있는 실정이다. 일반적으로, 목질계로부터 생산된 2세대 바이오연료는 수송부문에서 기존 화석연료를 대체하고 온실가스를 감축하는데 큰 효과가 있는 것으로 알려져 있다. 이러한 이유로 정부는 목질계 기반 바이오매스 액화연료(biomass-to-liquid fuel)에 대해 파일럿 수준으로 기술개발 중에 있다. 따라서 본 연구에서는 바이오매스액화연료 생산을 위한 동일공정으로 합성된 F-T(Fischer-Tropsch) 디젤의 연료적 특성을 연구하였다. 합성 F-T 디젤은 자동차용 경유에 단독 또는 혼합하여 사용할 수 있는 장점으로 인해 자동차용 경유엔진에 사용될 수 있다. 그 이유는 합성 F-T 디젤이 자동차용 경유와 비슷한 물리적 특성을 가지기 때문이다. 본 연구에 사용된 F-T 디젤은 Fischer-Tropsch (F-T) 공정을 이용하여 저온($240^{\circ}C$)에서 철 촉매를 가지고 합성되었다. 합성 F-T 디젤은 n-파라핀과 iso-파라핀을 함유하고, 등유와 경유 성분을 가진 $C_{12}{\sim}C_{23+}$ 분포로 이루어졌다. 합성 F-T 디젤은 합성 F-T 연료부터 증류를 통해 분리된 합성 F-T 디젤은 자동차용 경유에 비해 세탄가가 높으며, 방향족화합물은 매우 낮고, 황함량는 초저황(sulfur free) 수준으로 평가되었다. 또한 합성 F-T 디젤은 자동차용 경유와 비교하여 황과 방향족 화합물의 함량이 낮기 때문에 윤활성이 열악함을 보였다.

• Communications for Statistical Applications and Methods
• /
• 제30권2호
• /
• pp.119-133
• /
• 2023

With the rapid growth of the economy and fossil fuel consumption, the concentration of air pollutants has increased significantly and the air pollution problem is no longer limited to small areas. We conduct statistical analysis with the actual data related to air quality that covers the entire of South Korea using R and Python. Some factors such as SO₂, CO, O₃, NO₂, PM₁₀, precipitation, wind speed, wind direction, vapor pressure, local pressure, sea level pressure, temperature, humidity, and others are used as covariates. The main goal of this paper is to predict air quality index (AQI) spatio-temporal data. The observations of spatio-temporal big datasets like AQI data are correlated both spatially and temporally, and computation of the prediction or forecasting with dependence structure is often infeasible. As such, the likelihood function based on the spatio-temporal model may be complicated and some special modelings are useful for statistically reliable predictions. In this paper, we propose several methods for this big spatio-temporal AQI data. First, random effects with spatio-temporal basis functions model, a classical statistical analysis, is proposed. Next, neural networks model, a deep learning method based on artificial neural networks, is applied. Finally, random forest model, a machine learning method that is closer to computational science, will be introduced. Then we compare the forecasting performance of each other in terms of predictive diagnostics. As a result of the analysis, all three methods predicted the normal level of PM_2.5 well, but the performance seems to be poor at the extreme value.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.24-28
• /
• 2014

With ever rising concerns about saving of fossil fuel resource, there have been an increasing demand for use of energy more efficiently. The electric motor driven inverters can be a great help to improve energy efficiency. They are also used to control the motor speed to the actual need. Therefore the use of them can lead to reduce energy consumption. In particular, the medium voltage(MV) drive systems used for pumps, fans, steel rolling mills and tractions have widespread applications in the industry. They cover power ratings from 0.4MW to 40MW at the MV level of 2.3kV to 13.8kV. The majority of the installed MV drive systems however, are in the 1MW to 4MW range with voltage rating from 3.3kV to 6.6kV. But they are required to reduce size and weight like other power electronic equipments. In this paper, we studied on the 3.3kV(105A) compact rack type inverter system for improving the cooling efficiency. At first, we confirmed the tendency of temperature with computational simulation using ANSYS ICEPAK and actual experimental tests. And then we researched thermal performance improvement designs in order to reduce temperature of the transformer for the safe operation. It can reduce temperature of transformer that using pipe type flow guide in the system. As a result, we found out more efficient solution by thermal-fluid analysis.

• Environmental Engineering Research
• /
• 제16권3호
• /
• pp.159-164
• /
• 2011

This study examined the emission characteristics of impure gas-like hydrogen sulfide and siloxane contained in landfill gas (LFG) and investigated the effect of impure gas on LFG utility facilities. As a result of an LFG component analysis from eight landfills in the same environment, hydrogen sulfide averaged 436 ppmv (22-1,211 ppmv), and the concentration of total siloxane averaged 7.95 mg/$m^3$ (1.85-21.18 mg/$m^3$). In case of siloxane concentration by component, the ratio of D4 (average 3.79 mg/$m^3$) and D5 (average 2.64 mg/$m^3$) indicated the highest level. Different kinds of scales were found on the gas air heater (GAH) and inside the boiler. The major component of scale from the GAH was $Fe_2O_3$ of 38.5%, and it was caused by hydrogen sulfide. Other scale was found on the bottom and the wall of the boiler and the scale was silicon dioxide of 92.8% and 98.9%. The silicon dioxide scale was caused by combustion of siloxane. As a result of a scanning electron microscopy analysis, the structure of the silicon dioxide scale from the boiler was an immediate filamentous type. Consequently, as silicon dioxide scale is bulky, such bad effects were worsening, as an interruption in heat conduction, increase in fuel consumption, damage to the boiler by overheating, and clogged emission pipeline could occur in LFG utility facilities.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.629-634
• /
• 2011

초고속 비행체에 적용 가능한 소모성 터빈엔진 개발을 위한 사전연구를 수행하였다. 엔진 요구도 및 설계점 결정을 위한 가상 운용임무형상을 선정하고, 유사급 엔진과 참고문헌 등을 통해 확보된 데이터를 활용하여 설계점 해석을 수행하였는데, 해면고도, 마하수 1.2 조건에서 터빈입구온도 3,600R에 대한 설계점 계산결과, 비추력 2599.4 ft/s, 비연료소모율 1.483 lb/($lb^*h$)이 예측되었다. 설계점 계산결과를 기준으로 두 가지 임무형상에 대한 엔진 성능해석결과, 엔진 최대 순추력을 결정하는 설계변수는 천음속 및 낮은 초음속영역에서는 터빈입구온도, 높은 초음속 영역에서는 압축기 출구온도임을 확인하였다. 이밖에도 단순, 저가, 경량의 엔진형상으로 축류형 다단압축기와 직류형 연소기, 1단 축류터빈, 고정 수축팽창 노즐이 적용된 단순터보제트엔진을 제시하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.350-353
• /
• 2007

본 연구에서는 항공기용 가스터빈 엔진의 운용에 있어 실시간 결함 진단을 위해 유전 알고리즘을 사용하였다. 탈 설계 영역에서 성능 저하를 고려한 가스터빈 엔진의 구성요소는 압축기, 가스발생기 터빈, 동력 터빈이다. 지상정지 상태인 설계점에 비해 고도, 비행 마하수, 연료유량에 대한 탈 설계 진단의 경우 학습 데이터는 약 200배 이상으로 증가하였으며, 요구 수렴도를 만족시키기 위해 방대한 학습시간이 요구된다. 탈 설계 영역에서 단일결함에 관한 진단오차를 만족시키고 학습시간을 단축시키기 위해 최적분할을 사용하였고 그 결과, 오차범위 5% 이내로 진단됨을 확인하였다.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.97-102
• /
• 2013

초고속 비행체에 적용 가능한 소모성 터빈엔진 개발을 위한 사전연구를 수행하였다. 엔진 요구도 결정을 위한 가상 운용임무형상을 선정한 후, 유사급 엔진과 참고문헌 등을 통해 확보된 설계변수 값을 활용하여 설계점 해석을 수행하였는데, 해면고도, 마하수 1.2 조건에서 터빈입구온도 3,600 R에 대한 설계점 계산결과, 비추력 2,599.4 ft/s, 비연료소모율 1.483 lb/(lb*h)이 예측되었다. 두 가지 임무형상에 대한 엔진 성능해석결과로부터 엔진 최대 순추력을 결정하는 설계변수는 천음속 및 낮은 초음속영역에서는 터빈입구온도, 높은 초음속 영역에서는 압축기 출구온도임을 확인하였다. 이밖에도 단순, 저가, 경량의 터빈엔진형상으로 축류형 다단압축기와 직류형 연소기, 1단 축류터빈, 고정 수축팽창 노즐이 적용된 단순터보제트엔진을 제시하였다.

• 한국조경학회지
• /
• 제27권1호
• /
• pp.39-53
• /
• 1999

This study quantified carbon uptake and emissions in urban landscape, and the role of urban greenspace in atmospheric carbon reduction for several cities of Chuncheon and Kangleung in Kangwon province. Mean carbon storage by trees and shrubs was 26.0 t (mertric tons)/ha in Chuncheon and 46.7 t/ha in Kangleung for natural lands, and ranged from 4.7 to 6.3 t/ha for urban lands (all land use types except natural and agricultural lands) in both cities. Mean annual carbon uptake by trees and shrubs ranged from 1.60 to 1.71 t/ha/yr for natural lands, and from 0.56 to 0.71 t/ha/yr for urban lands. There was no significant difference (95% confidence level) between the two cities in the carbon storage and annual carbon uptake per ha, except the carbon storage for natural lands. Organic carbon storage in soils (to a depth of 60 cm) of Chuncheon average 24.8 t/ha for urban lands and 31.6 t/ha for natural lands, 1.3 times greater than for urban lands. Annual carbon accumulation in soils was 1.3 t/hr/yr for natural lands of the study cities. Annual per capita carbon emissions from fossil fuel consumption were 1.3 t/yr in Chunceon and 1.8 t/yr in Kangleung. The principal carbon release in urban landscapes was from transport and industry. Total carbon storage by urban greenspace (trees, shrubs, and soils) equaled 66% of total carbon emissions in Chuncheon and 101% in Kangleung. Carbon uptake by urban greenspace annually offset total carbon emissions by approximately 4% in the study cities. Thus, urban greenspace played a partial important role in reducing atmospheric $CO_2$ concentrations. To increase $CO_2$ uptake and storage by urban greenspace, suggested are conservation of natural lands, minimization of hard surfaces and more plantings, selection of tree species with high growth rate, and proper management for longer healthy tree growth.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.80-86
• /
• 2008

Recently, controlled auto ignition(CAI) in gasoline engines are drawing more attentions due to its extremely low level of NOx emissions and potentials in lowering the fuel consumption rate. The one of the key techniques for realizing CAI combustion in engines is the control of valve system. Since the valve linkage system with higher complexity, or even earn-less valve systems, such as electro-hydraulic and electro-magnetic system, are adopted in CAI engines, it is not easy to estimate the valve lift profile from earn profiles. Therefore new measurement techniques for valve lift in CAI engines have been tried and tested. In this paper, hole type valve lift sensor was developed and tested to check the applicability in CAI engines. The valve lifts could be obtained from the sensor signal, which depends on the distance from the sensor to magnet attached to valve. Various engine speeds, ranging from 2,000 to 6,000 rpm, and valve lifts, maximum up to 9.7 mm, were tested. It was found that the sensor output for valve lift had accuracy of 98% in comparison with the basic specifications of valve lift through improvements of sensor driving circuit.