• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.17-25
• /
• 2013

Performance of DI diesel engine with high fuel injection method is directly related to the emission characteristics and fuel consumption. At present, diesel injection system with piezo element is replacing conventional solenoid type due to their faster electro-mechanical properties. In this study, it was investigated the sensitivity characteristics regarding internal hydraulic modeling based on the AMESim environment of piezo-driven injector The analytic parameter for this study defined such as In/Out orifice, injection hole's diameter and driven voltage on piezo stack. As the results, it was shown that these parameter influence on a fast response characteristics of piezo-driven injector. Also we found fuel pressure recovery time is faster about 0.1 ms due to larger IN orifice diameter. And larger OUT orifice diameter occurs maximum pressure drop with faster its timing of about 0.2 ms.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.113-119
• /
• 2014

For the robust design of Motor Driven Power Steering (MDPS) systems, it is important to consider energy efficiency from every aspect such as system configuration and current flow, etc. If design optimization is not considered, it has many problems on a vehicle. For example, when evaluating steering test, particularly the Catch-up test which turning the steering wheel left or right quickly, steering effort should be increased rapidly. Also a vehicle might have poor fuel efficiency. In this study, it is calculated energy consumption for each component of the steering system and analyzed factors of energy consumption. As a result, this paper redefines a method to estimate steering input torque using characteristics of vehicle electric components and then conducts an analysis of contribution for the Catch-up.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.3
• /
• pp.282-290
• /
• 2013

The global warming related to GHG (greenhouse gases) emissions from industries is a major issue globally. Furthermore, GHG emissions from the fishery industries also represent an important issue, as indicated by "The Code of Conduct for Responsible Fisheries" at the Cancun, Mexico, meeting in 1992 and by the Kyoto protocol in 2005. Korea pronounced itself to be a voluntary exclusion management country at the 16th IPCC at Cancun, Mexico, in 2010. However, few analyses of GHG emissions from Korean fisheries have been performed. Therefore, a quantitative analysis of GHG emissions from the major Korean fisheries is needed before guidelines for reducing GHG emissions from the fishing industry can be established. The aim of this study was to assess the present GHG emissions from the Korean Purse seine fishery using the LCA (life cycle assessment) method. The system boundary and allocation method were defined for the LCA analysis. The fuel consumption factor of the purse seine fishery was also calculated. The GHG emissions for the edible fish were evaluated by determining the weights of whole fish and gutted fish. Finally, the GHG emissions required to produce 1kg of whole fish and 1kg of edible fish were deduced. The results will help determine the GHG emissions from the fishery. They will also be helpful to stakeholders and the government in understanding the circumstances involved in GHG emissions from the fishing industry.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.110-116
• /
• 2014

For the prevention of environmental pollution, there have been many researches which are eco-friendly vehicles in the automobile industry. In this paper, we studied for the non-pneumatic tires(NPT)can increase fuel consumption compared to conventional pneumatic tires. On driving, energy loss of tires occur when tires impact an obstacle on the road. This energy loss directly is relate to the fuel efficiency. Therefore, the energy loss of non-pneumatic tires is compared before and after impact. In this study, the results of energy loss of non-pneumatic tires and pneumatic tires was compared, when tires are rolled over an obstacle. As a result, the energy loss of non-pneumatic tires was less than pneumatic tires. This researches were performed the ABAQUS using finite element method and obtained the difference of velocity and kinetic energy from the program.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.469-473
• /
• 1992

The conventional closed-loop guidance commands are generated from a simplified point mass model for real time operations. In real situations, the generated guidance commands are applied to the original rigid body. This can cause attitude instability of the vehicle. In this paper, in order to solve the attitude instability problem in the guidance system sense, the influence of the guidance commands on a launch vehicle attitude is derived quantitatively. The checking method of the attitude stability conditions that uses Liapunov theorem is proposed, and the attitude stabilizing method is also proposed. The attitude stability is accomplished by subtracting the influence of the guidance commands that destabilize the vehicle attitude. The closed-loop guidance commands generated from the simplified point mass model may destabilize the vehicle attitude, which is verified through simulations. In this case, the vehicle attitude can be always stabilized with the proposed attitude stabilizing method without additive fuel consumption.

• International Journal of Automotive Technology
• /
• v.4 no.3
• /
• pp.109-117
• /
• 2003

The analysis and evaluation of the transient performance by the transient response specifications under various acceleration speeds and types based on driver's typical acceleration habit are implemented by the experimental study to provide the appropriate direction for the transient control in a gasoline engine. The concept of the transient response specifications which consist of delay time, rising time, maximum overshoot and settling time, and the analysis method using them are introduced to evaluate the characteristics of the transient performance quantitatively. Furthermore four acceleration speeds and four acceleration types are set respectively to realize the various transient states which are similar to the real drive. Several performance parameters in terms of engine speed, manifold absolute pressure, fuel injection duration and air excess ratio are measured simultaneously during the various acceleration using a throttle actuator controlled by a PC. The transient response specifications characterized well the transient performance for the various acceleration speed and types quantitatively. Delay and rising time with increment of the acceleration speed became shorter, but settling time did longer. Intensified acceleration type appeared to be the most economical in view of fuel consumption, and linear acceleration type was found to have the least harmful emission concentration.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.69-75
• /
• 2021

Fuel economy has always been a major issue for the automotive industry due to environmental concerns. In particular, it is known that only 5-20% of the energy generated in a car that mainly uses an internal combustion engine is converted to increase fuel efficiency, many methods have been proposed. Among these methods, weight reduction is most commonly used because it is the simplest and cheapest. Weight is always the main reason for energy consumption, therefore, reducing weight is the best way to increase fuel efficiency while simultaneously saving on material costs. To reduce the weight of a compressor, material substitution is used. However, aluminum (a lighter metal substitute) is more fragile than steel, therefore, structural stability must be verified through testing. In this paper, we performed a 3D analysis to investigate whether aluminum can be used without compromising structural stability. Our investigation included static analysis and thermal analysis. As a result, we found that an aluminum swash plate can be safely applied on a shaft instead of steel; it reduces weight while maintaining stability that is equal to or better than steel.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.231-240
• /
• 2023

Purpose: The purpose of this study is to analyze air quality and carbon emissions in developing countries, particularly Myanmar, and explore the impact of transportation on CO2 emissions during peak hours relative to free-flow conditions. Method: This study conducted a traffic survey in two major cities in Myanmar to quantify carbon dioxide emissions from the transportation sector, using IPCC's tier 1 and tier 2 approaches, with statistical analysis performed using Python 3 and Microsoft Excel for comparative analysis of critical factors in CO2 emissions. Result: The result of this study is an estimate of the vehicle kilometers traveled (VKT) and fuel consumption in Yangon city for the year 2019, based on data from various sources including the Myanmar Statistical data base, YUTRA project survey, and Ministry of Electric and Energy. The study also analyzes the average travel time index (TTI) for the four roads in Yangon, which indicates the impact of congestion on vehicle travel time and CO2 emissions. Overall, the study provides important insights into the transport sector in Yangon city and can be used to inform policies aimed at reducing greenhouse gas emissions and improving traffic conditions. Conclusion: The study concludes that congestion plays a significant role in increasing fuel use and emission levels in the road transport sector in Myanmar. The analysis provides valuable insights into the impact of the sector on the environment and emphasizes the importance of addressing congestion to reduce fuel use and emissions. However, the study's scope is limited to Yangon city and Mandalay city, and some mean values may not accurately represent the entire country and other developing countries.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.56-62
• /
• 2011

In this study, a method for the press forming of rectangular aluminium tube has been proposed. Rectangular aluminium tube has high stiff as the cold steel which can be lighter over 30% weight. It is increased every year by being recycled over 80%. Press die consists of punch, wing-die and holder for aluminium tube bending. When punch is applied with aluminium tube, holder is operated as same punch and wing-die is rotated through hinge. Stress-strain relations and springback are considered by bending angle of aluminium tube. In this study, the behaviors on tubes of square aluminium and rectangular aluminium with different thickness and area are established by the analysis of $DEFORM^{TM}$-3D program. Reducing fuel consumption is expected by using the aluminium tube deformation and it becomes the lightweight through recycling.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.153-158
• /
• 2006

To optimize the combustion system in a HSDI diesel engine, a new analysis technology was developed. The in-cylinder 3-D combustion analysis was carried out by the modified KIVA-3V, and the spray characteristics for the high pressure injection system were analyzed by HYDSIM. The combustion design parameters were optimized by coupling the KIVA-3V and the iSIGHT. The optimization procedure consists of 3 steps. The $1^{st}$ step is the sampling method by the Design of Experiment(DOE), the $2^{nd}$ step is the approximation using the Neural Network method, and the $3^{rd}$ step is the optimization using the Genetic Algorithm. The developed procedures have been approved as very effective and reliable, and the computational results agree well with the experimental data. The analysis results show that the optimized combustion system in a HSDI diesel engine is capable of reducing NOx and Soot emissions simultaneously keeping a same level of the fuel consumption(BSFC).