• 에너지공학
• /
• 제24권1호
• /
• pp.149-163
• /
• 2015

본 연구에서는 전산유체역학(Computational Fluid Dynamics, CFD) 해석코드를 사용하여 마스트집합체의 열수력적 안전성에 대한 연구를 수행하였다. 이를 위해 자연대류 벤치마크 문제를 선정하여 CFD 코드의 물리모델을 선정 및 해석 능력을 검증하고 이를 이용하여 마스트집합체에 대한 자연대류 열전달 해석을 수행하였다. 본 연구에서는 Betts et al.의 사각 수직공동에서 난류 자연대류 실험결과를 대상으로 CFD 해석을 수행하여 자연대류 조건에 적용하기 위한 난류 모델로 표준 $k-{\omega}$ 모델을 선정하였다. 이렇게 도출된 난류모델을 CFD코드에 적용하여 Bates et al.에 의해 수행된 PNL(Pacific Northwest Laboratory)의 $2{\times}6$ 번들 실험과 이에 대한 Kwon et al.의 MATRA, Fluent 코드의 해석과 비교 계산을 수행하여 CFD코드의 부수로조건 자연대류 열전달 해석 능력을 검증하였다. 최종적으로 도출된 $k-{\omega}$ 난류 모델을 사용하여 마스트집합체 및 핵연료 집합체에 대한 자연대류 해석을 수행하였다. 해석 결과 수조 내부 및 부수로 내에서 안정적인 자연대류 유동이 발생함을 확인하였으며, 본 유동 조건에서 핵비등이탈비를 계산함으로써 열수력적 안전성을 정량적으로 평가하였다.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3217-3228
• /
• 2021

Flow blockage of the fuel assembly in the lead-based fast reactor (LFR) may produce critical local spots, which will result in cladding failure and threaten reactor safety. In this study, the flow blockage characteristics were analyzed with the sub-channel analysis method, and the circumferentially-varied method was employed for considering the non-uniform distribution of circumferential temperature. The developed sub-channel analysis code SACOS-PB was validated by a heat transfer experiment in a blocked 19-rod bundle cooled by lead-bismuth eutectic. The deviations between the predicted coolant temperature and experimental values are within ±5%, including small and large flow blockage scenarios. And the temperature distributions of the fuel rod could be better simulated by the circumferentially-varied method for the small blockage scenario. Based on the validated code, the analysis of blockage characteristics was conducted. It could be seen from the temperature and flow distributions that a large blockage accident is more destructive compared with a small one. The sensitivity analysis shows that the closer the blockage location is to the exit, the more dangerous the accident is. Similarly, a larger blockage length will lead to a more serious case. And a higher exit temperature will be generated resulting from a higher peak coolant temperature of the blocked region. This work could provide a reference for the future design and development of the LFR.

• 방사성폐기물학회지
• /
• 제9권3호
• /
• pp.169-179
• /
• 2011

우리나라에서 운영하는 원자력발전소는 PWR형과 CANDU형 2종류가 있으며, 원자력발전에 의한 지속적인 에너지 공급을 위하여 이들로부터 발생하는 사용후핵연료에 대한 안전관리는 매우 중요한 인자이다. 사용후핵연료 처분을 위한 연구는 1997년부터 시작하여 한국형 사용후핵연료 처분시스템을 개발하였으며, 현재는 개발된 기술에 대한 실증 및 처분시스템의 효율향상을 위한 연구를 진행하고 있다. 또한, PWR형 사용후핵 연료의 경우 사용후핵연료 재활용 공정을 거쳐 원료물질로 다시 사용하는 연구가 진행 중이므로, 이들 공정으로부터 발생하는 고준위폐기물을 처분하는 방안을 강구하고 있다. 이에 따라 본 논문에서는 PWR형과 CANDU형 사용후핵연료 모두를 직접 처분하는 개념으로 개발한 한국형 사용후핵연료 처분시스템을 바탕으로 CANDU형 사용후핵연료 처분 시스템의 처분효율을 향상시키는 방안을 도출하고자 하였다. 이를 위하여, 한국형 사용후핵연료 처분시스템의 CANDU 사용후핵연료 처분용기를 개선하여 현재 원자력발전소에서 사용하고 있는 사용후핵연료 60 다발(Bundle) 용량의 저장바스켓을 포장 활용하는 개념을 도출하고, 열해석을 통하여 처분시스템 완충재의 온도가 $100^{\circ}C$를 넘지 않도록 하는 요건을 만족하는 처분터널 및 처분공 간격을 정하여 이들에 대한 처분시스템 개념을 도출하였다. 이렇게 설정된 개념들을 단위면적당 열효율, 우라늄밀도(U-density), 처분면적, 굴착량, 완충재 및 폐쇄 물질량 측면에서 분석하여 처분효율이 가장 높은 방안을 제안하였다. 본 연구의 결과는 추후 실제 부지특성자료와 연계하여 PWR 사용후핵연료 재활용공정으로부터 발생한 고준위폐기물 처분시스템과 함께 복합 처분장 설계에 활용될 것이다.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.206-214
• /
• 2000

The pressure tube is a major component of the CANDU reactor, which supports nuclear fuel bundle and it's containment vessel. If a flaw is found during the periodic inspection from the pressure tube s. the integrity evaluation must be carried out. and the safety requirements must be satisfied for continued service. In order to complete the integrity evaluation, complicated and iterative calculation procedures are required. Besides, a lot of data and knowledge for the evaluation are required for the entire: integrity evaluation process. For this reason. an integrity evaluation system, which provides efficient of evaluation with the help of attached databases, was developed. The developed system was built on the basis of ASME Sec. XI and FFSG(Fitness For Service Guidelines for zirconium alloy pressure tubes in operating CANDU reactors) issued by the AECL, and covers the delayed hydride cracking(DHC). This system does not only provide various databases including the 3-D finite element analysis results on pressure tubes, inspection data and design specifications but also is compatible with other commercial database software. In order to verify the developed system, several case studies have been performed and the results were compared with those from AECL. A good agreement was observed between those two results.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2305-2311
• /
• 2002

The pressure tube is a major component of the CANDU reactor, which supports nuclear fuel bundle and heavy water coolant. Pressure tubes are installed horizontally inside the reactor and only selected samples are periodically examined during in-service inspection. In this respect, a probabilistic safety assessment method is more appropriate fur the assessment of overall pressure tube safety. The failure behavior of CANDU pressure tubes, however, is governed by delayed hydride cracking which is the major difference from pipings and reactor pressure vessels. Since the delayed hydride cracking has more widely distributed governing parameters, it is impossible to apply a general PFM methodology directly. In this paper, a PFM methodology for the safety assessment of CANDU pressure tubes is introduced by applying Monte Carlo simulation in determining failure probability Initial hydrogen concentration, flaw shape and depth, axial and radial crack growth rate and fracture toughness were considered as probabilistic variables. Parametric study has been done under the base of pressure tube dimension and hydride precipitation temperature in calculating failure probability. Unstable fracture and plastic collapse are used for the failure assessment. The estimated failure probability showed about three-order difference with changing dimensions of pressure tube.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1834-1845
• /
• 2021

Liquid lead-bismuth cooled fast reactor is one of the most promising reactor types among the fourth-generation nuclear energy systems. The flow and heat transfer characteristics of lead-bismuth eutectic (LBE) are completely different from ordinary fluids due to its special thermal properties, causing that the traditional Reynolds analogy is no longer recommended and appropriate. More accurate turbulence flow and heat transfer model for the liquid metal lead-bismuth should be developed and applied in CFD simulation. In this paper, a specific CFD solver for simulating the flow and heat transfer of liquid lead-bismuth based on the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was developed based on the open source platform OpenFOAM. Then the advantage of proposed model was demonstrated and validated against a set of experimental data. Finally, the simulation of LBE turbulent flow and heat transfer in a 7-pin wire-wrapped rod bundle with the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was carried out. The influence of wire on the flow and heat transfer characteristics and the three-dimensional distribution of key thermal hydraulic parameters such as temperature, cross-flow velocity and Nusselt number were studied and presented. Compared with the traditional SED model with a constant Pr_t = 1.5 or 2.0, the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is more accurate on predicting the turbulence flow and heat transfer of liquid lead-bismuth. The average relative error of the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is reduced by 11.1% at most under the simulation conditions in this paper. This work is meaningful for the thermal hydraulic analysis and structure design of fuel assembly in the liquid lead-bismuth cooled fast reactor.