Browse > Article
http://dx.doi.org/10.1016/j.net.2021.05.007

Flow blockage analysis for fuel assembly in a lead-based fast reactor  

Wang, Chenglong (School of Nuclear Science and Technology, Shanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Wu, Di (School of Nuclear Science and Technology, Shanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Gui, Minyang (School of Nuclear Science and Technology, Shanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Cai, Rong (Nuclear Power Institute of China)
Zhu, Dahuan (Nuclear Power Institute of China)
Zhang, Dalin (School of Nuclear Science and Technology, Shanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Tian, Wenxi (School of Nuclear Science and Technology, Shanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Qiu, Suizheng (School of Nuclear Science and Technology, Shanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Su, G.H. (School of Nuclear Science and Technology, Shanxi Key Laboratory of Advanced Nuclear Energy and Technology, State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University)
Publication Information
Nuclear Engineering and Technology / v.53, no.10, 2021 , pp. 3217-3228 More about this Journal
Abstract
Flow blockage of the fuel assembly in the lead-based fast reactor (LFR) may produce critical local spots, which will result in cladding failure and threaten reactor safety. In this study, the flow blockage characteristics were analyzed with the sub-channel analysis method, and the circumferentially-varied method was employed for considering the non-uniform distribution of circumferential temperature. The developed sub-channel analysis code SACOS-PB was validated by a heat transfer experiment in a blocked 19-rod bundle cooled by lead-bismuth eutectic. The deviations between the predicted coolant temperature and experimental values are within ±5%, including small and large flow blockage scenarios. And the temperature distributions of the fuel rod could be better simulated by the circumferentially-varied method for the small blockage scenario. Based on the validated code, the analysis of blockage characteristics was conducted. It could be seen from the temperature and flow distributions that a large blockage accident is more destructive compared with a small one. The sensitivity analysis shows that the closer the blockage location is to the exit, the more dangerous the accident is. Similarly, a larger blockage length will lead to a more serious case. And a higher exit temperature will be generated resulting from a higher peak coolant temperature of the blocked region. This work could provide a reference for the future design and development of the LFR.
Keywords
LFR assembly; Flow blockage characteristics; Sub-channel analysis; Code development and validation;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Rehme, Klaus, Pressure drop correlations for fuel element spacers, Nucl. Technol. 17 (1) (1973) 15-23.   DOI
2 K. Tucek, J. Carlsson, D. Vidovic, H. Wider, Comparative study of minor actinide transmutation in sodium and lead-cooled fast reactor cores, Prog. Nucl. Energy 50 (2-6) (2008) 382-388.   DOI
3 F. Roelofs, A. Gerschenfeld, J. Pacio, N. Forgione, X. Cheng, Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors, Woodhead Publishing, 2019.
4 V. Kriventsev, A. Rineiski, W. Maschek, Application of safety analysis code SIMMER-IV to blockage accidents in FASTEF subcritical core, Ann. Nucl. Energy (2014) 114-121.
5 R. Marinari, I.D. Piazza, N. Forgione, F. Magugliani, Pre-test CFD simulations of the NACIE-UP BFPS test section, Ann. Nucl. Energy (2017) 1060-1072.   DOI
6 E.H. Novendstern, Turbulent flow pressure drop model for fuel rod assemblies utilizing a helical wire-wrap spacer system, Nucl. Eng. Des. 22 (1) (1972) 28-42.   DOI
7 H.Y. Jeong, K.S. Ha, Y.M. Kwon, Y.B. Lee, D. Hahn, A dominant geometrical parameter affecting the turbulent mixing rate in rod bundles, Int. J. Heat Mass Tran. 50 (5/6) (2007) 908-918.   DOI
8 X. Liu, N. Scarpelli, Development of a sub-channel code for liquid metal cooled fuel assembly, Ann. Nucl. Energy (2015) 425-435.
9 C. Chiu, N.E. Todreas, W.M. Rohsenow, Turbulent flow split model and supporting experiments for wire-wrapped core assemblies, Nucl. Technol. 50 (1) (1980) 40-52.   DOI
10 S.K. Cheng, N.E. Todreas, Hydrodynamic models and correlations for bare and wire-wrapped hexagonal rod bundles d bundle friction factors, subchannel friction factors and mixing parameters, Nucl. Eng. Des. 92 (2) (1986) 227-251.   DOI
11 H. Gong, Analysis of Blockage Accident for Single Assembly of LBE-Cooled Fast Reactor, 2014.
12 T. Mihara, Y. Tanaka, Y. Enuma, M. Ichimiya, M. Nomura, Feasibility Studies on Commercialized Fast Breeder Reactor System (3)-HLMC Fast Reactor, 2001.
13 Z. Su'ud, Comparative study on safety performance of nitride fueled lead-bismuth cooled fast reactor with various power levels, Prog. Nucl. Energy 32 (3-4) (1998) 571-577.   DOI
14 B.F. Gromov, Y.S. Belomitcev, E.I. Yefimov, M.P. Leonchuk, P.N. Martinov, Y.I. Orlov, et al., Use of lead-bismuth coolant in nuclear reactors and accelerator-driven systems, Nucl. Eng. Des. 173 (1-3) (1997) 207-217.   DOI
15 J. Pacio, M. Daubner, F. Fellmoser, K. Litfin, T. Wetzel, Heat transfer experiment in a partially (internally) blocked 19-rod bundle with wire spacers cooled by LBE, Nucl. Eng. Des. (2018) 225-240.
16 D. Wu, C. Wang, M. Gui, Z. Lan, Q. Lu, D. Zhang, W. Tian, S. Qiu, G.H. Su, Improvement and validation of a sub-channel analysis code for a lead-cooled reactor with wire spacers, Int. J. Energy Res. 45 (8) (2020) 12029-12046.
17 IAEA, Advanced reactors information system. https://aris.iaea.org/sites/overview.html, 2013.
18 Y. Zhang, C. Wang, Z. Lan, S. Wei, R. Chen, W. Tian, G.H. Su, Review of thermal-hydraulic issues and studies of lead-based fast reactors, Renew. Sustain. Energy Rev. 120 (2020) 109625.   DOI
19 P. Liu, X. Chen, A. Rineiski, W. Maschek, Transient analyses of the 400MWth-class EFIT accelerator driven transmuter with the multi-physics code: simmer-III, Nucl. Eng. Des. 240 (10) (2010) 3481-3494.   DOI
20 Y. Tian, G.H. Su, J. Wang, W.X. Tian, S.Z. Qiu, Code development and safety analyses for PbeBi-cooled direct contact boiling water fast reactor (PBWFR), Prog. Nucl. Energy (2013) 177-187.
21 R. Marinari, I.D. Piazza, M. Tarantino, N. Forgione, Blockage fuel pin simulator experiments and simulation, Nucl. Eng. Des. 353 (2019) 110215.   DOI
22 OECD/NEA Nuclear Science Committee, Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-Hydraulics and Technologies, Nuclear Energy Agency, NEA, 2007, 6195.
23 C. Wang, S. Wei, W. Tian, S. Qiu, G.H. Su, Sub-channel analysis for Pb-Bi-cooled direct contact boiling water fast reactor, Int. J. Energy Res. 42 (8) (2018) 2643-2654.   DOI