• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.658-662
• /
• 1990

In the air-fuel control of automotive engine to improve its efficiency, fuel economy and less emissions, conventional control methods using $O_{2}$ sensor or the lean air-fuel ratio sensor provide only open control in rich conditions. Control with a wide range air-fuel sensor makes it possible to employ closed loop control for all engine conditions including rich combustion. With a wide range A/F sensor and A/F transfer functions, a PID control system is constructed which employs an learning scheme. A/F controller is designed which enables to improve the ability of its compensation for sensors and actuators, and its control operation is evaluated by computer simulation.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.102-111
• /
• 1996

For the air-fuel ratio control in a fuel injection SI engine, the Jump-Ramp control algorithm has been widely adopted by using the on/off type oxygen sensor. But the Jump-Ramp control method has limitation on treating the frequency and amplitude of the air-fuel ratio oscillation. This study suggests another feedback control logic named modulated fuel feedback control, which has a concept of pre-tuned air-fuel ratio oscillation. In the modulation method, the oxygen sensor output is not treated as on/off signal but as analog signal for feedback. By using the modulation method, the frequency and the amplitude of air-fuel ratio oscillation can be adjustable to some extent for improving the conversion efficiency of the Three-Way Catalyst. The result shows that the performance of the modulation method is better than that Jump-Ramp control method in reducing the amplitude of the air-fuel ratio oscillation as well as in increasing the frequency of the air-fuel ratio oscillation.

• 항공우주시스템공학회지
• /
• 제12권6호
• /
• pp.17-22
• /
• 2018

항공기 항속시간에 영향을 미치는 요소인 연료량은 정확한 측정이 필요하다. 본 논문에서는 정전용량형 연료센서, DAQ 보드, Labview 소프트웨어로 구현된 연료량측정시스템을 다루었다. 연료량에 따라 변화하는 파라미터를 확인하기 위해 Pspice를 이용하여 구현된 시스템의 주회로가 시뮬레이션 되었다. 시뮬레이션을 통해 연료량에 따라 변화하는 파라미터인 Vrms를 찾아내었다. 연료 센서의 출력인 Vrms는 구현된 연료량측정시스템의 DAQ 보드를 통해 Labview 소프트웨어로 전송되고, 이 소프트웨어를 사용하여 연료량이 계산된다. 그 결과, 필터가 적용되지 않은 연료량측정시스템보다 정확도가 향상되었다.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.133-140
• /
• 2011

In this paper, a deformation measurement technology for nuclear fuel rods is proposed. The deformation measurement system includes a high-definition CMOS image sensor, a lens, a semiconductor laser line beam marker, and optical and mechanical accessories. The basic idea of the proposed deformation measurement system is to illuminate the outer surface of a fuel rod with a collimated laser line beam at an angle of 45 degrees or higher. For this method, it is assumed that a nuclear fuel rod and the optical axis of the image sensor for observing the rod are vertically composed. The relative motion of the fuel rod in the horizontal direction causes the illuminated laser line beam to move vertically along the surface of the fuel rod. The resulting change of the laser line beam position on the surface of the fuel rod is imaged as a parabolic beam in the high-definition CMOS image sensor. An ellipse model is then extracted from the parabolic beam pattern. The center coordinates of the ellipse model are taken as the feature of the deformed fuel rod. The vertical offset of the feature point of the nuclear fuel rod is derived based on the displacement of the offset in the horizontal direction. Based on the experimental results for a nuclear fuel rod sample with a formation of surface crud, an inspection resolution of 50 ${\mu}m$ is achieved using the proposed method. In terms of the degree of precision, this inspection resolution is an improvement of more than 300% from a 150 ${\mu}m$ resolution, which is the conventional measurement criteria required for the deformation of neutron irradiated fuel rods.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.95-101
• /
• 2011

We estimated on the stability of W/O type emulsified fuel using by capacitance sensor, so it concluded the following conclusions. For the first 24 hours, prepared emulsified fuel reveals phase separation ratio of 5%, maintains stable status which verifies the stability of emulsified fuel. Adding more water increases the phase separation ratio rapidly, and adding more surfactant displays stable emulsification. Adding water causes larger size of water droplet diameter, and adding surfactant mixture causes smaller size of water droplet diameter. In conclusion, the size of W/O type emulsified fuel water droplet diameter is directly related to the volume of surfactant, and density of water droplet diameter changes thedistribution according to water contents.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3184-3189
• /
• 2010

펌프의 성능을 개선하기 위해서는 펌프의 회전수 정보를 획득할 필요성이 있으나, 일반적으로 연료펌프는 연료탱크 안에 내장되어 그 회전수를 측정하기에 어려움이 있다. 연료 펌프의 회전수는 크게 가속도 센서를 이용하는 방법과 전류센서를 이용하는 두 가지 방법이 있다. 가속도 센서를 이용하는 방법은 연료 펌프의 진동수를 측정하여 회전수로 계산하는 방법이며, 전류 센서를 이용하는 방법은 펌프모터의 주기적 전압방출 특성을 이용하여 회전수를 계산하는 방법이다. 본 연구에서는 전류센서를 가속도 센서와 동시에 장착하여 다양한 측정 조건에 대한 실험을 수행하였다. 결론적으로 전류센서로도 연료펌프의 회전수를 정밀하게 측정하는 것이 가능하였으며 특히 낮은 회전수 영역에서는 가속도센서 대비 강건한 계측특성을 보였다. 오차 1% 이내의 회전수를 측정하기위하여, 가속도센서는 데이터 저장간격 0.5Hz 이하의 설정이 필요하였으며, 전류센서는 데이터 저장간격 2.0Hz이하의 설정이 필요하였다.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.812-828
• /
• 2010

A fuel injection system using an ECU HILS as an alternate to a vehicle test for the fuel injectors was developed. The throttle position, vehicle speed, engine speed, crank position, cam position, intake air flow, and several other sensor signals that are supplied to the ECU were measured and recorded as a data file for a vehicle driven in the FTP-75 mode in a chassis dynamometer. Electric signals that are equivalent to the sensor signals from the vehicle are reconstructed from the recorded data file using data acquisition boards, microprocessors, and computers. All sensor signals are supplied to the ECU with synchronized timing using a computer program. The findings show that the cost and time of vehicle experiments can be reduced using the ECU HILS system. Moreover, the repeatability of the generation of sensor signals can enhance the accuracy of a range of experiment related to vehicle testing. An ECU scanner that scans the sensor signals that are input to the ECU through a serial port was used to assess the accuracy of the reconstructed signals. The scanning results show good agreement with the reconstructed input signals. Injectors were connected to the ECU HILS system and were driven by the system to measure the quantity of injected fuel.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3260-3267
• /
• 2023

Zr-Nb alloy have been widely used as fuel rods in nuclear power plants. However, from the Fukushima nuclear accident, the weakness of the rod was revealed under harsh conditions, and research on the safety of these types of rods was conducted after the disaster. The method of depositing chromium onto the existing Zr-Nb alloy fuel rods is being considered as a means by which to compensate for the weakness of Zr-Nb alloy rods because chromium is strong against oxidation at high temperatures and has high strength. In order to secure these advantages, it is important to maintain the Cr thickness of the rods and properly inspect the rods before and during their use in power generation. Eddy current testing is a typical means of evaluating the thickness of thin metals and detecting surface defects. Depending on the size and shape of the inspected object, various eddy current sensors can be applied. In particular, because pancake sensors can be manufactured in very small sizes, they can be used for inspections even in narrow spaces, such as a nuclear fuel assembly. In this study, an eddy current technique was developed to confirm the feasibility of Cr coating thickness evaluations. After determining the design parameters of the pancake sensor by means of a FEM simulation, a FPCB pancake sensor was manufactured and the optimal frequency was selected by measuring minute changes in the Cr-coating thickness using the developed sensor.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1230-1235
• /
• 2019

본 논문은 2-핀 센서통합연료히터를 개발하고, IT기반의 저온유동성 신호분석 장치를 이용하여 성능을 평가한다. 2-핀 센서통합연료히터의 성능평가는 차량과 동일 환경으로 차량 오일의 유량(Oil flow quantity), 히터에 공급되는 전기적 특성을 측정 및 분석한다. 측정된 데이터는 신호분석 임베디드 회로로 전송하고, 원격에서 사용자들이 웹브라우저를 이용하여 연료 필터의 동작 상태 및 성능을 분석하고 평가한다. 실차에 장착한 후 센서통합연료히터를 검증하기 위하여 온도를 가변 할 수 있는 엔진시험 챔버에서 통합연료히터를 구동시킴으로써 주행 효과를 얻도록 하였고, 엔진의 연료필터 입출력 측에 실험 지그와 데이터 수집 장치를 설치하여 극저온 상황에서 연료필터 입출력 측 연료필터의 온도, 오일주입 능력, 유량 데이터 및 엔진시동의 발화점 등을 평가한다. 이처럼 2-핀 센서히터와 연료필터를 통합한 2-핀 센서통합연료히터 부품의 초기 발화시점, 전기적 특성 및 유량의 입출력 압력 등 차량과 유사한 환경에서 부품의 동작을 파악하고 분석함으로써 제품의 신뢰성을 높인다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.455-462
• /
• 1996

Automobile Fuel Shortage Detecting Sensor, in this paper, was fabricated by using heat dissipation coefficient difference between gasoline and air condition the NTC thermistor of Mn-Ni Co system with the composition ratio of Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt%. The condition of sensor operation is that, for turn-on characteristics, the time of arriving at 135mA must be less than 180 second when the DC voltage of 11V is applied in the air condition of -10.deg. C and that, for turn-off characteristics, the saturation current must be less than 60mA when the DC voltage of 15V is applied in the gasoline condition of 60.deg. C. It is known, from the experimental results, that the resistance range and B-constant for the Automobile Fuel Shortage Detecting Sensor with dimension of 5*3*0.9mm were 850-1150.ohm. and 1150-1250.deg. C, respectively and the resistance range and B-constant were agree with that of sensor operation condition. When Bi$_{2}$O$_{3}$ of 0-0.5wt% was added to Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt% composition, the resistivity and B-value were 380-430(.ohm.-cm) and 1930 - 2030, respectively. Particularly, for Bi$_{3}$O$_{3}$ of 0.25-0.5wt%, the sintering density of over 90% and the operation characteristics necessary to Automobile Fuel Shortage Detecting Sensor were obtained. The difference of heat dissipation coefficient gasoline and air condition was 15 times.