• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.115-120
• /
• 2001

The present study examined the possibility of $NO_{x}$ reduction in the high temperature industrial furnaces. duct burner of gas turbine cogeneration and two-stage gas turbine combustor. The experimental study was carried out for the diffusion flame of second stage combustor with the variations of oxygen concentration and supplying rate of hot exhaust gas from first stage combustor. It also examined the flammability range and $NO_{x}$ formation of the second stage combustor in which the fuel is supplying into the mixture of oxygen hot exhaust gas from first stage combustor. The results show that the enrichment of oxygen and increase of exhaust gas lead to increase the $NO_{x}$ up to 50 ppm with 23% $O_{2}$ condition.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1682-1685
• /
• 2004

Gas Turbine combustors for power plant can be reduced NOx emissions using lean premixed combustion technology. But the combustors are likely to occur combustion oscillations which damage operation reliability and mechanical life of the gas turbines. In this paper, characterizations of oscillation in a gas turbine combustor for power plant are presented. Combustion dynamics occur $1{\sim}1.5$ psi in amplitude with low frequency less than 140Hz during normal operation. An abnormal high level dynamics, 2.0 psi amplitude occur at 125 Hz frequency. Abnormal combustion oscillation is reduced by modulation of fuel supply valve control schedule.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.85-90
• /
• 1996

석탄 직접연소의 신기술인 Cyclone 연소기술은 환경오염저감 기술증의 하나로서, 고온 연소로 인해 회분이 연소실 내부에서 용융, 제거된 후 고온의 청정연소가스만 보일러로 유입된다. 또한 연소기의 fuel-rich 연소조건하에서 생성된 고온의 불완전연소가스는 보일러 입구에서 충분한 재연소공기를 공급함으로서 완전연소시킬 수 있으므로 적은 시설투자 비용으로 기존 오일이나 가스용 보일러를 석탄용으로 전환이 용이할 뿐만 아니라 이러한 다단 연소방식을 채택하여 NOx 제어도 가능하다는 이점이 있다. Cyclone 연소기술의 개발은 석탄의 청정연소 뿐만 아니라 그 기술을 토대로 석탄가스화, MHD 발전, 가연성 폐기물 소각등에도 활용할 수 있다. 따라서 국내 기술자립을 위해 실험용 Cyclone 연소기를 설계, 제작 및 연소실험을 수행한 결과, Peco-semi탄을 연료로 공급량 약 30 kg/hr, 공기비 약 1.0 일 때 탄소전환율은 약 95% 이며 회분제거율은 약 70%임을 확인할 수 있었다.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.19-31
• /
• 1993

디젤자동차는 가솔린 자동차에 비하여 연료소비효율(fuel economy)이 20-30% 정도 높고 고출력을 낼수 있어 이의 수요가 증가하고 있다. 본 고에서는 디젤자동차에서 배출되는 수많은 화학물질중에서 문제가 되고 있는 입자상물질, NOx 및 SO$_{2}$를 제거하는 기술에 대하여 살펴본다. 이러한 오염물질의 저감을 위하여는 배기가스 재순환, 분사시기의 조절, 인터쿨링 같은 연소기술의 개선과 유황분이 적고, 방향족화합물의 함량이 적은 청정연료를 사용하여 어느 수준까지는 목적을 달성할 수 있다. 1. 디젤자동차 배출허용기준. 2. 배기가스 정화기술. 2.1 트랩기술(trap technology). 2.2 재생기술(regeneration technology). 2.3 제어 및 센서기술(control and sensor technology)

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.194-197
• /
• 2008

We measured the efficiency and flue gas concentration of a 90kW woodchip boiler which is for heating water of lodging. At nominal operating condition, the fuel, woodchip is fed into the boiler at a rate of 22.6 kg/h. In order to determine the efficiency of the boiler, we measured the water flow rate, woodchip flow rate, heating value and water content of woodchip, temperature of inlet and outlet of heating water. The results of test show that the power output of the woodchip boiler is 90.0 kW(77,400 kcal/h) and the thermal efficiency of the boiler is 88.5%. By using a gas analyser, flue gas concentrations are measured. The results show that O2 in the flue gas is 10.2%, CO concentration is 393 ppm and NOx concentration is 74 ppm.

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.315-323
• /
• 1995

차세대의 새로운 발전방식인 인산형 연료전지 발전시스템의 운용기술의 확립을 위하여 50 kW급 실증설비를 도입하고 주변기기를 설계, 설치하여 장기운전 특성시험을 실시하였다. 이 설비는 1993년 8월부터 1994년 11월 말까지 총 6,003시간의 운전기간 동안 187,190 kWh의 발전전력량을 기록하였고, 이 기간 동안의 발전운전시간 이용율은 63.01%, 평균출력은 33.5 kW였다. 설비의 운전특성에 있어서 정부하시 평균전압 및 전류는 각각 DC 130 V와 461 A였으며, 경시전압감소율은 1,000시간당 3.8 mV 정도로 나타났다. 설비의 기동·정지 특성중 기동시간은 냉간기동시 평균 4시간 50분, 난기동시 2시간 34분 정도가 소요되었고, 발전효율은 정부하시 전기효율이 37.46%, 배열이용효율은 43.8%로 전체효율 81.26%를 나타냈다. 환경 특성중 배가스중의 NOx 농도는 1 ppm 미만이었고, 소음도 63 dB 정도로 양호한 특성을 보여주었다. 운전기간 중 발생한 사고는 총23회로, 외부운전조건에 대한 민감성이 큰 것으로 나타났으며, PAFC 시스템의 상용화를 위해서는 스택수명 및 운전신뢰성을 향상시키는 것이 필요하다.

• International Journal of Automotive Technology
• /
• v.5 no.4
• /
• pp.311-319
• /
• 2004

There are many methods to test engine emissions depending on the regulations used such as FTP-75(CYS-75) mode, 10-15 mode and ECE-15 mode. Most of these modes consist of transient conditions such as cranking, rapid acceleration or deceleration modes. In this experimental research, the transient characteristics including cranking and accelerating mode in SI engines were studied to compare pure gasoline with methanol-reformulated fuels for performance and exhaust emissions. The results show that methanol-reformulated fuels have a better emissions reduction rate than that of pure gasoline especially for HC, CO and NOx emissions during cranking mode. The acceleration performances conform to the results of the distillation curve and the CO concentration for RM50 varies slightly in acceleration mode.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.85-90
• /
• 2006

Since air pollution has become a globally critical issue and exhaust emissions from automobiles cause a major source of air pollution, many countries including advanced countries have stipulated stringent emission regulations. This test was conducted on the effect of continuous regeneration diesel particulate filter and cooled-EGR, and 15ppm low sulfur diesel was used as a test fuel. Exhaust emissions, PM, NOx, CO, HC and Soots were measured and compared under D-13modes. Through durability test on diesel particulate filter, regeneration characteristics and control technology on PM were investigated in overall.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.2
• /
• pp.225-236
• /
• 2004

Diesel engines which emit a lot of PM and NOx have been known as a main air polluter. Especially, diesel particulate matters (OPM) including black smoke are hazardous air pollutants to human health and environment. The nations retaining advanced engine technologies have reinforced emission regulations. To meet these regulations diesel engine manufacturers have developed low-emission diesel engines, aftertreatment equipments, alternative fuel technologies and so on. In this study, particle number concentrations characteristics according to particle size and engine driving conditions were analyzed when these low-emission technologies were applied. There was a tendency of increasing particle number concentrations from heavy-duty diesel engines with increasing engine rpm and load rate. In the cases of COPF (Catalytic Diesel Particulate Filter), CNG (Compressed Natural Gas) engine and ULSD (Ultra Low Sulfur Diesel) more than 99% of particle number concentration were removed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.10-18
• /
• 2004

It is well known that the stratified charge combustion has many kind of advantages to combustion characteristics, such as higher thermal efficiency and less CO, NOx levels than conventional homogeneous mixture combustion. Although this combustion can be caused low fuel consumption, it is produced the high unburned hydrocarbon and soot levels because of different equivalence ratio in the combustion chamber. Moreover it has a lot of possibility of low output and misfire if the mixture gas would not be in existence around the spark plug. In this paper, fundamental studies for stratified combustion were carried out using a constant volume combustion chamber. The effect of locally mixture gas distribution according to control the direct injection and premixed injection in the chamber were examined experimentally. In addition, the effects of turbulence on stratified charge combustion process were observed by schlieren photography.