• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.79-86
• /
• 2000

The effects of recirculated exhaust gas on the wears of piston and piston rings were investigated by the experiment with a two-cylinder, four cycle, indirect injection diesel engine operating at an engine load of 75% and an engine speed of 1600 rpm. For the purpose of comparison between the wear rates of two cylinders with and without EGR, the recirculated exhaust gas was sucked into one of two cylinders after the soot contenets in exhaust emissions were removed by an intentionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diameter), while only the fresh air was inhaled into the other cylinder. These experiments were carried out on the fuel injection timing fixed at 15.3$^{\circ}$ BTDC. It was found that the wear rate of piston skirt with EGR increased a little bit, but the piston head diameter increased, rather than decreased, owing to soot adhesion and erosion wear, and especially larger with EGR, and that the wear rates of the top and second piston ring(compression ring)thickness with EGR were more than twice the wear rate of top ring in case of no EGR, but the wear rate of oil rings thickness without EGR increased greater than that with EGR.

• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1524-1532
• /
• 2001

The effects of recirculated exhaust gas on the wear of cylinder liner and piston were experimentally investigated by a two-cylinder, four cycle, indirect injection diesel engine operating at 75% lo ad and 1600 rpm. For the purpose of comparison between the wear rates of the two cylinders with and without EGR, the recirculated exhaust gas was sucked into one of two cylinders after the soot in exhaust emissions was removed by an intentionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diameter), while only the fresh air was inhaled into the other cylinder. These experiments were carried out with the fuel injection timing fixed at 15.3$^{\circ}$ BTDC. It was found that the mean wear rate of cylinder liner with EGR was greater in the measurement positions of the second half than those of the first half, that the mean wear rate without EGR was almost uniform regardless of measurement positions, and that the wear rate of piston skirt with EGR increased a little bit, but the piston head diameter increased, rather than decreased, owing to soot adhesion and erosion wear, and especially larger with EGR.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.84-89
• /
• 2014

Not only the emission regulation of on-road vehicle engine, but also emission regulation of off-road engine have been reinforced. It is the reason of wide application of emission reduction technology for off-road engines. In this study, optimization of engine parameters (Injector hole number, Injection timing and EGR rate) for reduction of NOx and smoke emissions were conducted by using the analysis of sensitivity and S/N ratio of Taguchi method(DOE). As results, this paper shows optimum value of the parameters for NOx and smoke emission reduction. From the result of reproducibility verification, it is final that the prediction value of NOx and smoke has the error of below 10%. Consequently, the method and results of this study will be used for quantitative reference to EGR control mapping in next study.

• 한국추진공학회지
• /
• 제8권1호
• /
• pp.61-69
• /
• 2004

본 연구는 극초음속 모델 스크램제트 엔진 연소기의 화염지지와 연료-공기 혼합과정의 특성을 살펴보기 위하여 수치해석을 이용하여 수행되었다. 연료분사 방법으로 수소연료가 초음속 유동장에 수직분사되는 경우와 공동내부에 분사되는 두 가지 경우를 채택하였으며 각각 UQ(University of Queensland, Australia)와 ANU(Australian National University, Australia)의 충격파 풍동을 이용하여 실험이 수행되었다. 수치해석을 통하여 수직분사 상류의 박리영역과 공동주변에서 연소현상이 관찰되었다. 수직분사의 박리영역과 공동내부분사의 공동은 재순환 영역을 발생시키며, 이 재순환 영역은 연료-공기의 혼합을 촉진시킨다. 또한 자발점화가 박리영역-자유류, 공동-자유류 경계면에서 발생함을 알 수 있었다.

• 한국가스학회지
• /
• 제19권4호
• /
• pp.22-28
• /
• 2015

LPG가 수송용 연료로서 경쟁력을 유지하기 위해서는 지속적인 기술개발을 통해 휘발유와의 연비격차를 감소시키고 후처리시스템 등에 의한 가격 부담을 낮추어야 한다. 이에 본 연구에서는 안정적인 희박연소 구현을 통한 연비개선을 얻기 위해 실린더 중앙에 점화플러그와 연료분사기가 인접해 있고, 연료가 분사된 후 바로 점화가 이루어지도록 하는 분무유도방식의 LPG 직접분사엔진을 개발의 일환으로 연소제어인자의 변화에 따른 연소 특성을 분석하였다. 안정적인 연소를 위해 국부적으로 농후한 혼합기를 형성하는 성층희박연소의 특성상 일정 수준이상의 질소산화물이 배출되는 문제점을 갖고 있다. 질소산화물 저감을 위해 EGR을 적용한 결과 연료소비율과 THC의 배출은 약간 증가하지만 $NO_x$배출은 약 15% 저감되었다. EGR 적용에 의한 연소속도의 감소는 초기 화염발달 시기에 집중되어 나타났으며 흡입공기의 희석효과에 의해 EGR율이 증가할수록 최대 열방출율 및 열방출율 증가 기울기가 감소하였다.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1247-1254
• /
• 2000

The effects of recirculated exhaust gas on the characteristics of $NO_x$ and soot emissions under a wide range of engine load have been experimentally investigated by a water-cooled, four-cylinder, indirect injection, four cycle and marine diesel engine operating at two kinds of engine speeds. The simultaneous control of $NO_x$ and soot emissions in diesel engines is targeted in this study. The EGR system is used to reduce $NO_x$ emissions, and a novel diesel soot removal device with a cylinder-type scrubber for the experiment system which has 6 water injectors(A water injector has 144 nozzles in 1.0 mm diameter) is specially designed and manufactured to reduce the soot contents in the recirculated exhaust gas to intake system of the engines. The intake oxygen concentration and the mean equivalence ratio calculated by the intake air flow and fuel consumption rate, and the exhaust oxygen concentration measured are used to analyse and discuss the influences of EGR rate on $NO_x$ and soot emissions. The experiments are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions. It is found that $NO_x$ emissions are decreased and soot emissions are increased owing to the drop of intake oxygen concentration and exhaust oxygen concentration, and the rise of equivalence ratio as the EGR rate rises.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.136-144
• /
• 2010

Exhaust gas recirculation (EGR) is an emission control technology allowing significant NOx emission reduction from light-and heavy duty diesel engines. The future EGR type, dual loop EGR, combining features of high pressure loop EGR and low pressure loop EGR, was developed and optimized by using a commercial engine simulation program, GT-POWER. Some variables were selected to control dual loop EGR system such as VGT (Variable Geometry Turbocharger)performance, especially turbo speed, flap valve opening diameter at the exhaust tail pipe, and EGR valve opening diameter. Applying the dual loop EGR system in the light-duty diesel engine might cause some problems, such as decrease of engine performance and increase of brake specific fuel consumption (BSFC). So proper EGR rate (or mass flow) control would be needed because there are trade-offs of two types of the EGR (HPL and LPL) features. In this study, a diesel engine under dual loop EGR system was optimized by using design of experiment (DoE). Some dominant variables were determined which had effects on torque, BSFC, NOx, and EGR rate. As a result, optimization was performed to compensate the torque and BSFC by controlling start of injection (SOI), injection mass and EGR valves, etc.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.16-21
• /
• 2015

Nitrous oxide($N_2O$) concentration in the atmosphere has been constantly increased by the human activities with industrial growth after the industrial revolution. One of factors to increase $N_2O$ concentration in the atmosphere is the $N_2O$ emission caused by the combustion of marine fuel. Especially, a sulfur component included in marine fuel oils is known as increasing the $N_2O$ formation in diesel combustion. Form this point of view, $N_2O$ emission from a ship is not negligible. On the other hand, Exhaust gas recirculation(EGR) that have thermal, chemical and dilution effect is effective method for reducing the NOx emission. In this study, an author investigated $N_2O$ reduction by using EGR on a direct injection diesel engine. The test engine was a 4-stroke diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of the engine was a fixed load of 75%. The experimental oil was a blend-fuel that were adjusted with sulfur ratio of 3.5%, and EGR ratio of 0%, 10%, 20% and 30%. In conclusion, diesel fuel that contained 3.5% sulfur component increased $SO_2$ emission in exhaust gas, and increment of EGR ratio reduced NO emission. Moreover, $N_2O$ emission was decreased as over 50% at EGR ratio of 10% and reduced 100% at EGR ratio of 30% compared with $N_2O$ emission of 0% EGR ratio.

• 대한기계학회논문집B
• /
• 제36권1호
• /
• pp.103-110
• /
• 2012

EV double cone 버너를 장착한 스월 예혼합 연소기를 대상으로 LES 수치기법을 적용하여 연소기내의 유동 현상과 연료/공기 혼합, 화염 거동에 대해 조사하였고, 공연비와 압력 변화에 따른 NOx, CO 농도 변화를 예측하였다. 버너에서 발생한 강한 스월로 인해 재순환 영역이 발생하였으며, 희박 예혼합 화염은 버너 출구부터 형성되어 0.2 m 이내에 존재하는 것으로 나타났다. 상압, 공연비 38.7인 해석 조건에서 NOx 발생량은 연소기 출구에서 0.59 ppm으로 예측되었고, CO는 화염면에서 다량 생성되나 출구로 갈수록 급격히 산화되어 출구에서 5.25 ppm으로 낮게 예측되었다. 또한, NOx 배출량은 공연비가 높아질수록, 압력이 감소할수록 줄어드는 것으로 나타났다. 설계 변경을 통해 다양한 연료 공급 형태에서의 NOx 배출 특성을 조사하였으며, 5 lance-hole 분사의 경우 가장 적은 NOx 배출 특성을 보였다.

• 한국연소학회지
• /
• 제3권1호
• /
• pp.71-78
• /
• 1998

The flame stabilization and the combustion characteristics of diffusion flame formed in the wake of a cylindrical bluff body with fuel injection are studied. With the turbulence generator, the flame stability limits and ion currents were measured and analyzed. The results from this experimental study are summarized as follows. The region with highest average value of ion currents in the middle of flame is moved to the upstream side by the turbulent components of main stream. The flame mass with partially active reaction is moved fast for uniform flow and turbulence generator G3, but the flame mass with relatively slow reaction is moved slowly for turbulence generator G1. If the turbulence generator with strong turbulent component is installed, the turbulent time scale is increased with movement from main stream side to recirculation zone as well as the flame stability limits is deteriorated. Though the special dominant frequency is not appeared in the eddy which exists in flame, high frequency characteristics are appeared in uniform flow and turbulence generator G3, and low frequency characteristics are appeared in uniform flow, turbulence generator G3 and G1.