• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.307-312
• /
• 2002

A study on the exhaust emissions of marine diesel engine with various fuel injection timing is performed experimentally .In this paper, fuel injection timing is changed from BTDC $14^{\circ}$ to $20^{\circ}$ by $2^{\circ}$ intervals, the experiments are performed at engine speed 1800rpm and from load 0% to 100% by 25% intervals, and main measured parameters are fuel consumption rate, Soot, NOx, HC and CO emissions etc. The obtained conclusions are as follows (1) Specific fuel consumption is indicated the least value at BTDC $18^{\circ}$ of fuel injection timing and it is increased in case of leading the injection timing. (2) Soot emission is decreased in case of leading fuel injection timing and it is increased in the form of convex downwards with increasing the load. (3) NOx emission is increased in case of leading fuel injection timing and it is increased in the form of straight line nearly with increasing the load. (4) HC and CO emissions are decreased in case of leading fuel injection timing and they are changed in the form of convex downwards with increasing the load.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.50-56
• /
• 2001

A study on the exhaust emissions of diesel engine with various fuel injection timing is peformed experimentally. In this paper, fuel injection timing is changed from BTDC $14^{\circ}$ to $20^{\circ}$ by $2^{\circ}$ intervals, the experiments are performed at engine speed 1800rpm and from load 25% to 100% by 25% intervals, and main measured parameters are fuel consumption rate, Soot, NOx. HC and CO emissions etc. The obtained conclusions are as follows (1) Specific fuel consumption is indicated the least value at BTDC $18^{\circ}$ of fuel injection timing and it is increased in case of leading the injection timing. (2) Soot emission is decreased in case of leading fuel injection timing and it is increased in the form of convex downwards with increasing the load. (3) $NO_x$ emission is increased in case of leading fuel injection timing and it is increased in the form of straight line nearly with increasing the load. (4) HC and CO emissions are decreased in case of leading fuel injection timing and they are changed in the form of convex downwards with increasing the load.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.49-61
• /
• 1983

U shape multitube heat exchanger was equipped in the flue to recover the exhaust heat from the boiler system. The fluids of the exhaust heat recovery equipment were the flue gas as the hot fluid, and the water as the cold fluid. The flow geometry of the fluids was cross flow - two pass, the hot fluid being mixed and the cold fluid unmixed. The results of the theoretical and the experimental analysis and the economic evaluation are summarized as follows. 1) The heat exchanger effectiveness and the temperature efficiency of the hot fluid were about 35% when the fuel consumption rate was 140 - 150 L/15min. The temperature efficiency for the cold fluid ranged from 3.0% to 4.5%. The insulation efficiency ranged from 85% to 98%, which was better than the KS air preheater insulation efficiency of 90%. 2) The relationship between the fuel consumption rate, F, and the outlet temperature, $T_{h2}$, of the flue gas from the heat exchanger was $T_{h2}$ = 0.927F + 110. In order to prevent the low temperature corrosion from the coagulation of $SO_3$, it is necessary to maintain the fuel consumption rate above 82 L/15min. 3) The ratio of the exhaust heat from the boiler system to the total energy consumption was about 14.5%. With the installation of the exhaust heat recovery equipment, the energy recovery ratio to the exhaust heat was about 25%. Accordingly, about 3.6% of the total fuel consumption was estimated to be saved. 4) Economic analysis indicated that the installation of the exhaust heat recovery equipment was feasible to save the energy, because the capital reocvery period was only 10 months when the fuel consumption rate was 80 L/15min. 4 months when it was 160 L/15min. 5) Based on the theoretical and the experimental analysis, it was estimated to save the energy of about 18 million Won per year, if four heat exchangers are installed in a factory. 6) A further study is recommended to identify the relationship among the flow rate of the exhaust gas, the size of the heat exchanger and the capacity of the air preheater. For a maximum heat recovery from the exhaust gas an automatic control system is required to control the flow rate of the cold fluid depending on the boiler load.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.481-489
• /
• 1998

The effects of recirculated exhaust gas on the characteristics of fuel economy combustion and exhaust emissions have been experimentally investigated by a four-cylinder four cycle indirect injection water-cooled and marine diesel engine operating at several loads and speeds. in order to reduce the soot contents in the recirculated exhaust gas to intake system of the engine a novel diesel soot removal system with a cylinder-type scrubber which has 6 water injectors(A water injector has 144 nozzles in 1.0 mm diameter) is specially designed and manufactured for the experiment system The experiments in this study are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions, The brake specific fuel consumption rate is slightly fluctuated with EGR in the range of experimental conditions, The maximum value of premixed combustion for the rate of heat release is decreased with EGR at engine load 25% and the ignition is slightly delayed with EGR at engine load 100% NOx emissions are markedly decreased with EGR especially at high loads while soot emissions are increased as the EGR rate rises.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.9-16
• /
• 2016

초음파 진동자에 의해 미립화된 탄화수소계 액체연료 분사화염의 연소특성을 고찰하기 위한 실험이 수행되었다. 초고속카메라를 이용하여 미립화된 액체연료의 화염형상을 획득하였고, 이미지 후처리를 통해 화염의 구조와 거동을 면밀히 분석하였다. 또한 정밀유량계측법을 이용하여 연소반응 시 소모된 연료량도 측정하였다. 그 결과, 수송기체 유량이 증가하면 무화된 연료의 분사량도 같이 증가하였으나, 공연비(air/fuel ratio)와 수송기체 유량의 상관성은 관찰되지 않았다. 화염면적은 공연비 보다는 연료의 분사량과 진동자 인가전력에 종속하였으며, 화염면적의 FFT 분석을 통해 생성화염의 진동특성도 고찰하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권5호
• /
• pp.554-564
• /
• 2002

A newly designed combustion chamber of diesel engine with a modified piston crown was prepared for the purpose of investigation for reduction of NO emission. It was intended to realize 2-stage combustion that is to keep fuel rich condition during early stage of combustion and fuel lean condition during next stage. The engine was tested on various conditions concerning exhaust gas emissions especially about NO emission and simultaneously fuel consumption rate. It was found that the engine with 2-stage combustion type piston emits significantly low NO at various speed and torque compared with conventional engines, but it raised points at issue in CO and smoke emissions with fuel consumption rate. The increasing of injection pressure on 2 stage combustion type diesel engine affects on CO and smoke emission considerably to reduce but slightly on NO to increase. The effect of 2-stage combustion was better at low speed than at high speed.

• 한국분무공학회지
• /
• 제19권2호
• /
• pp.64-68
• /
• 2014

A driving vehicle performance which is driven by FTP-75 mode was simulated by computer. Throttle valve position, engine speed, air mass flow rate, fuel consumption et al. were computer simulated. A set of engine part load performance data, automatic transmission shift map and vehicle specifications were used for the computer simulation. Throttle valve position, engine speed, air mass flow rate et al. measured for evaluating the computer simulation results by driving the vehicle with FTP-75 mode on a chassis dynamometer. GT-Power$^{(R)}$ software was used for the computer simulation of the driving vehicle performance. Experimental fuel consumption rate was measured by using an ECU HILS fuel injection system. The experimental data and simulation results were compared. The computer simulation of the driving vehicle performance predicts the measured data well comparatively.

• 한국추진공학회지
• /
• 제15권2호
• /
• pp.23-28
• /
• 2011

제트연료변경에 따른 엔진 운용 특성 변화를 살펴보기 위해 JP-8 연료와 JP-S 연료를 사용하여 소형터 보제트엔진의 지상시험 및 고도시험을 수행하였다. 비중이 18% 높은 JP-S 연료에 대한 연료조절시스템 특성은 동일 연료공급명령에 대한 실 연료공급량이 JP-8 연료보다 8% 많이 공급되었다. 시동특성은 연료조절시스템의 명령 대비 공급량의 차이로 인한 점화시점 및 엔진 회전수 가속율 등의 변화를 제외하고는 유사한 특성을 보였다. 정상상태 성능 특성은 순 추력의 일부 구간을 제외하고는 순 추력과 공기유량, 배기가스온도 등 대부분의 엔진 성능 변수가 1% 이내로 유사하였으나 연료소모량만은 연료의 발열량 차이로 인해 최대 5 %이상 차이가 발생하였다. 이를 동일 추력 대비 비 연료소모율로 비교할 때 지상시험에서는 약 1.1~2.6 %, 고공환경시험에서는 5 % 이상 차이가 발생하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.410-415
• /
• 2010

제트연료변경에 따른 엔진 운용 특성 변화를 살펴보기 위해 JP-8 연료와 JP-S 연료를 사용하여 소형터보제트엔진의 지상시험 및 고도시험을 수행하였다. 비중이 18% 높은 JP-S 연료에 대한 연료조절 시스템 특성은 동일 연료공급명령에 대한 실 연료공급량이 JP-8 연료보다 8% 많이 공급되었다. 시동 특성은 연료조절시스템의 명령 대비 공급량의 차이로 인한 점화시점 및 엔진 회전수 가속율 등의 변화를 제외하고는 유사한 특성을 보였다. 정상상태 성능 특성은 순 추력의 일부 구간을 제외하고는 순추력과 공기유량, 배기가스온도 등 대부분의 엔진 성능 변수가 1% 이내로 유사하였으나 연료소모량만은 연료의 발열량 차이로 인해 최대 5 %이상 차이가 발생하였다. 이를 동일 추력 대비 비 연료소모율로 비교할 때 지상시험에서는 약 1.1~2.6 %, 고공환경시험에서는 5 % 이상 차이가 발생하였다.

• 대한기계학회논문집B
• /
• 제40권8호
• /
• pp.485-494
• /
• 2016

본 연구는 TMED 방식 병렬형 하이브리드 차량을 이용하여 회생제동 회수율 및 연비 특성 실험에 대한 것이다. 회생제동 기술은 하이브리드 차량의 에너지 효율 향상을 위해 필수적인 기술로 판단되어 연구를 수행하였다. 따라서 병렬형 하이브리드 차량과 Eddy Current 방식의 차대동력계를 통해 IM240 모드 실험 시 초기 SOC 상태, 주행 모드 특성, 운전자의 운전특성에 따른 연비 특성을 회생 제동 측면에서 전류 특성 및 전류수지에 대한 비교 분석을 수행하였다. 본 연구결과, 초기 SOC 상태가 낮을수록 하이브리드 차량의 엔진 작동 시간이 증가 하고 에너지 효율이 낮아지는 것을 알 수 있었다. 또한 주행 모드 특성, 운전자의 운전 특성에 따른 연비 특성 실험 결과 평균 연비 차이는 크게 나지 않았지만, 최종 SOC 상태에 따라서 모드 종료 후 엔진 작동 유무의 차이가 있음을 알 수 있었다.