• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.48-53
• /
• 2014

A low-noise regenerative blower is developed for fuel cell application by combining the FANDAS-Regen code and design optimization algorithm under several performance constraints for flow capacity, static pressure, efficiency and power consumption. The optimized blower design model is manufactured with some impeller modification based on low noise design concept and tested by using aerodynamic performance chamber facility and narrow-band noise measurement apparatus. The measured results of the optimized blower satisfy the performance requirements and are also compared favorably with the FANDAS-Regen prediction results within a few percent relative error. Furthermore, the present study shows the remarkable noise reduction by 26 dBA can be achieved through design optimization and low noise design concept.

• 한국추진공학회지
• /
• 제22권1호
• /
• pp.72-79
• /
• 2018

초음파 진동자에 의해 미립화된 케로신 분무연소의 OH 라디칼과 CH 라디칼의 자발광 특성을 고찰하기 위한 실험이 수행되었다. ICCD 카메라를 이용하여 분무화염의 자발광 강도를 측정하였으며, 연소 시 소모된 연료량은 정밀유량측정법으로 계측하였다. 그 결과, 연료소모율은 수송기체인 공기 공급유량에 선형적으로 증가하였으며, 분무연소의 특징인 전형적인 그룹 연소가 관찰되었다. OH 라디칼과 CH 라디칼을 분석한 결과, 분사방향으로의 유량 증가에 따라 라디칼 방사강도의 최댓값은 감소하고 그 위치는 후류로 이동하여 반응대의 폭은 증가하였다.

• 한국건설관리학회논문집
• /
• 제14권2호
• /
• pp.78-86
• /
• 2013

지구온난화의 원인인 $CO_2$를 줄이기 위한 연구들이 전(全) 산업분야에서 활발하게 진행되고 있는 가운데, 건설분야에서도 $CO_2$의 발생을 최소화하려는 연구들이 다양하게 추진되고 있다. $CO_2$ 발생량 최소화를 위한 연구는 $CO_2$ 배출량을 기반으로 하고 있는데 $CO_2$배출량을 산정하는 방법은 크게 연료사용량 대비 탄소배출계수를 이용한 방법, LCA기반 방법론 그리고 산업연관표를 이용한 방법으로 나뉜다. 특히 연료사용량을 기반으로 탄소배출계수를 이용하는 방법은 IPCC 에서 3가지 방법(Tier1~Tier3)을 권장하고 있다. 이 중 현재 가장 많이 활용되고 있는 방법이 Tier1으로서 연료사용량과 탄소배출계수만을 이용하는 방법이다. 그러나 이 방법은 차종별 이동거리가 반영되지 않을 뿐 아니라 주행환경 등의 반영이 안되기 때문에 정확한 $CO_2$배출량을 산정할 수 없다. 특히 건설프로젝트 는 프로젝트의 특성에 따라 이산화탄소 배출량은 달라질 수 있다. 하지만 현재의 방법으로는 이러한 차이를 제대로 반영할 수 없다. 따라서 개별 프로젝트의 특성을 반영하여 이산화탄소 배출량을 산정하는 방법론이 필요하며 이러한 방법론의 가장 핵심은 에너지를 사용하는 건설장비의 이산화탄소 배출량을 직접 측정하는 것이다. 본 연구에서는 건설과정에서 발생하는 이산화탄소의 배출량 산정방법론을 개발하기 위한 연구로서 건설장비의 이산화탄소 배출량을 실시간으로 측정할 수 있는 방법의 제안을 목적으로 한다.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.70-73
• /
• 2013

토양정화를 위한 토양 세정 및 세척 공정에서 계면활성제 선택 기준과 가장 중요한 설계인자는 오염물질의 용해도이다. 계면활성제의 오염물질 용해도는 오염물질과 평형상태를 만든 후 Dichrolomethane을 이용한 추출, 증발, 농축 등의 전처리과정을 거쳐야 한다. 따라서 계면활성제 용액 내 유류 오염 물질의 용해도 분석은 많은 시간과 재료를 필요로 한다. 계면장력은 계면활성제용액과 유류오염물질 사이에 유지되는 힘을 지칭하는 것으로 용해도와 밀접한 관계를 가진다. 본 연구는 계면활성제용액과 경유 간 계면장력과 용해도를 측정하여 계면장력과 용해도간 상관관계를 정립하므로 신속한 계면 장력 측정을 통한 용해도를 가늠할 수 있는 방안을 제시하였다. 계면장력과 유류용해도간 상관관계를 평가한 결과 두 특성은 기하급수적인 반비례관계를 보였다. 즉, 계면장력이 5 dyne/cm 이상조건에서 경유의 용해도는 크게 차이를 보이지 않다가 1 dyne/cm 이하에서 경유의 용해도는 급격하게 증가하였다. 앞으로 계면활성제용액 간 계면장력을 우선적으로 측정해 본다면 토양정화에 적합한 계면활성제 종류 및 농도를 매우 신속하고 효율적으로 선택할 수 있을 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제39권3호
• /
• pp.158-165
• /
• 2014

Purpose: The objective of this paper was to compare test standards regarding the performance and safety of agricultural tractors to identify the differences in test conditions, measurement tolerances, and test procedures. Based on the comparison, some recommendations were proposed for possible revisions or improvements to current tractor test standards. Methods: The test standards and codes of major standards development organizations (SDOs), such as the Organization for Economic Cooperation and Development (OECD), the International Organization for Standardization (ISO), the American Society of Agricultural and Biological Engineers (ASABE), EC type approval, and the board of actions of the Nebraska Tractor Test Laboratories (NTTL), were selected and analyzed. Comparison of the test standards: The ISO provides references for fuel and lubricants for tractor tests, and the OECD provides additional measurements for calculating fuel consumption characteristics during the power take-off (PTO) tests. The ISO, EC type approval, and the ASABE provide PTO protective device and the safety requirements. During drawbar power tests, seven transmission ratios are selected for fully automatic transmissions, according to the OECD. In case of hydraulic lift tests, ISO 789-2 and OECD Code 2 advise the use of a static lift force, while SAE J283 advises the use of additional dynamic lift capacity tests for a better representation of in-field operations. The OECD, the ISO, and EC type approval determine the seat index point (SIP), whereas the ASABE determines the seat reference point (SRP) for roll-over protective structure (ROPS) tests. Diversified measurement tolerances were among the braking performance test standards. The European Union (EU) has developed daily limits for vibration exposures with adaptations from ISO 2631-1. Electromagnetic compatibility evaluations are emerging of high-efficiency tractors due to the long-term conformance to electromagnetic emissions and interferences. Comparisons of tractor test standards discussed in this paper are expected to provide useful information for tractor manufacturers and standards development personnel to improve the performance and safety test standards of tractors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1816-1822
• /
• 2000

The maximum and mean indicated pressure of two stroke low speed diesel engine has been continuously increased with a view of increasing engine power and also reducing fuel consumption. As a result, axial excitation has been highed comparing to that of the previous and so in standard axial vibration damper is applied to all two stroke low speed diesel engine at the free end of crankshaft. Though many studies were carried out for marine use, few has been made for diesel power plant because there was little demand for power plant. Nowadays, diesel engine is much to be used for many benefits and so in this paper, the optimum design of axial vibration on the 65 MW diesel power plant with 9K80MC-S engine was carried out. And the axial-torsional coupled vibration of this shafting system is identified by theoretical analysis and vibration measurement.

• 한국소음진동공학회논문집
• /
• 제11권9호
• /
• pp.398-405
• /
• 2001

The maximum and mean indicated pressure of two stroke low speed diesel engine has been continuously increased with a view of increasing engine power and also reducing fuel consumption. As a result, axial excitation has been increased comparing to that of the previous one. So the axial vibration damper in standard one is applied to all two stroke low speed diesel engine at the free end of crankshaft. Though many studies were carried out for marine use, few has been made for diesel power plant because there was little demand for power plant. Nowadays, diesel engine is much to be used for many benefits. In this paper, the optimum design of axial vibration on the 65 kW diesel power plant with tow 9K80MC-S engines of 9 cylinders was carried out. And the axial-torsional coupled vibration of this shafting system is identified by theoretical analysis and vibration measurement.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.587-590
• /
• 2017

마이크로 가스터빈엔진의 성능 실험연구를 수행하였다. 성능측정을 위하여 마이크로엔진에 적합한 시험장치를 구축하였으며, Olympus HP Engine을 이용하여 성능측정을 수행하였다. 엔진흡입 공기유량, 추력, 연료소모율, 각 구성품 입구에서의 공기 및 가스온도를 측정하였다. 측정된 결과부터 마이크로 가스터빈 엔진의 성능특성을 보다 잘 이해할 수 있었다.

• 한국환경보건학회지
• /
• 제10권2호
• /
• pp.69-77
• /
• 1984

Air pollution has been one of the severe problems in city area. Sulfur dioxide is the major pollutant among the air pollutants. And the lichen as a botanical indicator have been used to predict the air pollution level. This study was carried out to evaluate the air pollution level in Taejon area through the field survey which were checked lichen status and sulfur dioxide content in the atmosphere. The results were as follows 1. The average sulfur dioxide content in Taejon area was 0.031ppm. The comparison of measurement methods were regression equation, Y= 0.357$\times$+0.014 and correlation factor, r = 0.771. 2. The maximum point of the SO$_2$ level was site No. 2(Daehwa-Dong), 0.087 ppm and the minimum, site No. 8 (Doma 2-Dong), 0.009ppm. 3. Total amounts of sulfur dioxide yearly emitted from Taejon area by fuel consumption estimated 29829.6 tons. 4. The relationship between degree of lichen and sulfur dioxide contents were 0.000~0.020ppm : Zone No. 2 0.020~0.060ppm : Zone No. 1 over 0.060ppm : Zone No. 0

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.106-115
• /
• 2018

The forward and afterward parts of ships and offshore structures are designed to improve the fuel consumption performance. These are made of curved plates with a large thickness. If a fabricated curved plate has some dimensional errors, a lot of additional cost is incurred in the assembly process. Thus, an accurate dimensional assessment is very important for fabrication. In this paper, we propose an assessment method for the dimensional quality management of curved plates. This can be applied to data measured using a variety of three-dimensional instruments, with boundary measurement points automatically classified and sorted to create a measurement surface. The assessment is evaluated after matching the CAD surface and the measured surface considering constrained conditions. The fabrication assessment is evaluated as a probability of how much the tolerance is satisfied.