• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.38 no.12
• /
• pp.51-60
• /
• 2009

본 연구에서는 착상 조건 하에서 열교환기 휜의 열전도를 고려하여 휜 표면에서의 착상 거동을 예측하기 위하여 수학적 모델을 제시한다. 이 때, 공기측은 착상 현상에 대한 3차원 유동 변화의 영향을 고려한다. 서리층 두께에 대한 해석 결과는 실험 결과를 최대 10% 오차 내에서 잘 예측한다. 유동에 수직한 방향(z-dir.)의 서리층 두께 성장은 휜의 열전도에 의해 휜 바탕 근처에서 활발하고, 휜 끝으로 갈수록 지수함수적으로 둔화된다. 휜의 열전도를 고려한 경우에 비해 휜의 표면온도가 일정한 조건에서 서리층 두께는 최대 2배, 열전달량은 평군 10% 정도 과대 예측한다. 따라서, 열교환기 휜에서의 착상 거동을 정확하게 예측하기 위해 착상 모델 해석 시 휜의 열전도를 고려해야 한다. 휜의 열전도 고려 유무에 따른 착상 거동의 차이를 보완하기 위해 열전달량에 대한 등가온도를 산출하며, 이를 근거로 무차원 등가 온도 상관식을 도출한다.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.124-130
• /
• 2007

In this study, we present the preparation and characterization of oxidized fullerene and fullerene dimer [$C_{120}$]. From the XRD data, other weak peaks with pristine fullerene [$C_{60}$] peaks were observed in the X-ray diffraction patterns for fullerene dimer [$C_{120}$]. SEM micrographs for the fullerene dimer [$C_{120}$] indicated that practically all the surface state was shown the drastic morphology changes and its outer surface is clearly visible and resulted in clogging and frost-like formation. From the MALDI-TOF mass spectra, the differences in the spectra recorded on two kinds of fullerene are due to the oxidation including chemical bonding and bridging between the $C_{60}$ molecules. We also obtained additional information from FT-IR spectra on functional component on the chemically modified surface of oxidized fullerene and fullerene dimer [$C_{120}$].

• Journal of the Korean association of regional geographers
• /
• v.6 no.2
• /
• pp.71-82
• /
• 2000

The purpose of this paper is to clarify geomorphic features and development on the boulder stream of granitoid in Korea. Considering the purpose and the method of this paper, three boulder streams are selected : Biseulsan(Mt. Biseul) boulder stream (Daegu city), Maneosan (Mt. Maneo) boulder stream(Gyeongnam province), Geumjeongsan(Mt. Geumjeong) boulder stream (Busan city). The boulder streams mentioned above are bigger in scale and more typical in shape than any other ones in the Korean Peninsula. The main results are summarized as follows. 1. The following are the main features of the boulder streams morphology : the mean gradient is $3{\sim}25^{\circ}$, the longer axes of the component boulders within the deposits averaged about 2m in length, the shapes of the component boulders may be both subangular and subrounded features. 2. The formation of the component boulders is associated with deep weathering of granitoid under warm humid conditions, and the downward movement of boulders occurred by solifluction and frost creep under periglacial conditions. 3. The geomorphic development stage of the boulder streams may be classified into four stages. These boulder streams come under fossil landform stage, the 4th stage ; evidence provided by lichens and weathering features indicate inactive or fossil landform. 4. In generally, boulder streams are well developed on shallow valley floors.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.357-362
• /
• 2009

As a unutilized energy, treated sewage water locates widespread near urban areas. From the previous survey, the sewage water is reported to hold energy potential up to 36,000 Tcal/year, which was 2.1% of the total domestic energy consumption and 9.7% of the energy usage in the household and business sector in 2006. Temperature of the sewage water differs locally, but its range is observed in a range of $20{\sim}25^{\circ}C$ in summer and $8{\sim}13^{\circ}C$ in winter. Since the temperature range of the sewage water has a better seasonal distribution about $5{\sim}10^{\circ}C$ compared to ambient air, it is a promising heat sink for summer or heat source for winter. The sewage water is also a high quality heat source from its abundant quantity and uniform temperature. Considering the ambient temperature of Korea is very low in winter, a heat pump system using the sewage water can be an alternative to prevent problems of capacity deficiency and frost formation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.4
• /
• pp.123-132
• /
• 2020

With increasing social interest in health and health promotion, the government and many organizations are conducting various health campaigns for the public. The public health campaign is aimed at protecting the people from the dangers of disease and contributing to a healthy life and also help establishing a healthy attitude and changing behavior as well. In addition, many researches have been carried out in order to enhance the advertising effect of campaigns aimed at forming preventive attitudes and to verify it by applying many theories. However, as a result, there is a significant lack of research regarding analysis of differences in the effectiveness of the campaign by media. This study is to analyze the effect of health campaign by the type of media which published health campaign advertisements that can affect prevention attitude. To meet the purpose of this study, The 15 print media were to examine the impact of media characteristics and types on participation in campaigns for health campaigns. Through this, we will present the role of the media as an efficient channel to encourage the formation and participation of the health attitude of campaign advertisements, and present significant implications in the selection of optimal media and the execution of campaign budgets.

• Journal of ILASS-Korea
• /
• v.12 no.1
• /
• pp.38-44
• /
• 2007

Since the Liquid Phase LPG injection (LPLI) system has Advantages in power generation and emission characteristics compared to the mixer-type fuel-supply system, a variety of studies regarding LPLi system has been conducted and its applications are made in automobile industry. However, the heat extraction due to the evaporation of liquid fuel, causes not only a post-accumulation of fuel but also an icing phenomenon which is a frost of moisture in the air around the nozzle tip. Since there exists a difficulty in the accurate control of air fuel ratio in both fuel supply systems, it can result in poor engine performance and a large amount of harmful emissions. This research examines the characteristics of icing phenomenon and develops anti-icing bushing to prevent an icing on the surface of the injection tip. It was found that n-butane, which has a relatively high boiling point ($-0.5^{\circ}C$), was a main species of post-accumulation. Also the results show that the post-accumulation problem was allevaited the utilization of a large inner to outer bore ratio and smooth surface roughness. In addition, an icing phenomenon and its formation process were found to be mainly affected by the humidity and the temperature of inlet air in an inlet duct. Also, it was observed that an icing phenomenon is lessened using aluminum bushing whose end coincides with the end of fuel injection tip in length.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.235-242
• /
• 2006

This study experimentally investigates the performance improvement of the heat pump by adopting the hot gas bypass method and using the internal heat exchanger according to the automatic defrost test conditions of ISO 5151 This study compares the hot gas bypass method with the time step method, and investigates effect on outdoor coil fan speed when the hot gas of compressor outlet enter outdoor coil inlet after the frost formation. The tests were made for the fan speeds of the outdoor coil controlled at 90, 60 and 30% of the normal speed together with the case of the stationary fan. The performance of the heat pump is evaluated by variables such as COP, heat capacity, and the average COP during the 210 minutes heating mode. Results show that average COP of the hot gas bypass mettled is $2.2{\sim}6%$ higher than that of the time step method. When the outdoor coil fan speed is 60% (780 rpm) of the normal speed, it shows the best COP and heating capacity.

• The Korean Journal of Quaternary Research
• /
• v.3 no.1
• /
• pp.87-101
• /
• 1989

The development of the Hantan river basin can be divided into three stages. The first stage include the ancient Hantan channel system prior to the Chongokni basalt which yield dates of about 0.6 mya from the K/Ar dating method. During this period the Baekuyri formation was formed. The Baekuyri formation is widely observed under the Chongokni basalt along the current river system. The second stage is the period when stream channels stayed on the top of the basalt plateau. Aggradation and deggradation were continued by meandering and braiding channel systems until major stream channel was formed. The currently remaining deposit on the top of the basalt was formed by lacustrine and fluvial systems in this period. During this period Pleistocene hominid was present on edge of water and flood plain and left Paleolithic material. This period was begun at the time of the final basalt flow dated about 300,000 BP. The third stage is designed for the time when the Hantan river channel was dropped down to a level from which the channel could not influence the top of the basalt any more No more deposit could be formed but erosion by surface water has been continued on the top of the basalt since then. The dropping of the Hantan river channel was probably not very long after the final flow of the basalt. Because of frost action and heavy concentrated precipitation in the basin area along with blocky and clumnar joint structure of the basalt, erosional process of the basalt is believed to have been carried out within a relatively short time. The lowering of the Hantan river channel was probably completed in a cycle of major fluctuation of world cimate. Also, the redclay on the top of the basalt is believed to have been formed during a warm period around 200,000 BP, which accords with the climatic change suggested above fair1y well. The Paleolithic materials in tile deposits fell accordingly into approximately same time period.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.245-252
• /
• 2018

Yam bean (Pachyrhizus erosus) is a subtropical plant belonging to the Fabaceae family, and is a tuberous vegetable used as various food material with a crisp and juicy taste. This study was conducted to seek optimum sowing time of yam bean in Korea. For this, we surveyed germination properties by the different temperatures and compared the accumulation temperature (AT) and dry matter production (DMP) on growth stages of yam bean by the different sowing times. Two types of varieties cultivated mainly in Korea, Thailand local variety (TLV) and Cheongunmanma cultivar (CGMM), was used. The germination rate of yam bean was 86.0~94.0% at above $18^{\circ}C$, and germination days was longer at lower temperature. The times for flowering and tuber formation of CGMM were later than those of TLV, and the AT required for flowering, tuber formation and hypertrophy of CGMM were higher than those of TLV by $293^{\circ}C$, $280^{\circ}C$ and $108^{\circ}C$, respectively. Also, DMP of shoot and tuber in CGMM were greater than those in TLV. In sowing at April 25, tuber formation was slower than sowing after that time, and harvest index (HI) was relatively low due to delayed formation and hypertrophy of tuber. In sowing after June 9, DMP of shoot was relatively greater in early growth, but tuber was not sufficient to enlarge due to lack of growth days by cold and frost in late October. In sowing May 10 and 25, DMP of tuber and HI were the highest, because the change of day length and temperature gave an advantage to vegetable growth and tuber development. All above suggest that it was suitable to sow seeds on May for increment of tuber productivity in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.53-64
• /
• 1973

The studies reported herein were conducted to investigate the effect of thermal conditions in double-cropping of rice. The accumulated daily mean and minimum air temperatures, for the period of the last 30 years, were examined at the 10 different meteorogical stations which are located in the southern part of Korea. The results obtained could be summarized as follows: 1. The first cropping. a. It seemed to be free from any frost-damage of rice at the seeding stage at Yeosu, Pusan and Cheju. However, it was found that there were some dangers of frost damage for about 30 to 40 day at Iri, Chonju and Kwangju, for 18 to 28 days at Daeku and Ulsan, and for 4 to 14 days at Mokpo and Pohang, respectively. b. The early critical transplanting date seemed to be from middle to late-April in the first cropping. As compared with the ordinary lowland seedlings, the semi-protected and upland ones could be planted 5 and 10 days earlier, respectively. c. The early critical heading date was about late-June and there were some low-temperature damages for 8 to 25 days at young-ear formation stage of rice plant, depending upon location. d. The early critical ripening date (the early critical transplanting date of the 2nd cropping) was from late-July to early-August. It took about 32 to 39 days in ripening. There was a tendency of SS${\fallingdotseq}$SL$15^{\circ}C$ (${\theta}$15) and the minimum of $10^{\circ}C$ (${\theta}$10), the ten locations could be devided into two ripening groups of ${\theta}$15>${\theta}$10 and ${\theta}$15<${\theta}$10. c. The late critical ripening date was around October 9 at Iri, Chonju, Kwangju and Daeku and around October 28 at Mokpo, Yeosu, Pusan and eheju. Three to four days were more required for a complete ripening of rice, as compared with the above dates. d. There was an overlap of about 12 to 42 days between the first and second cropping when early-maturing varieties requiring an accumulated mean air temperature of $1, 550^{\circ}C$, from transplanting to heading, were grown. Therefore, some varieties which could head with an accumulated daily mean air temperature of 1, 000 to $1, 200^{\circ}C$, should be either developed or some new cultural technology be established in order to have a successful double cropping in rice.