• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.100-110
• /
• 2005

We carried oui a study on the marine environment and distribution of phytoplankton community, such as chlorophyll a, species composition, dominant species and standing crops in the Northern East China Sea during early summer of 2004. According to the analysis of a T-S diagram, three characteristics of water masses were identified. We classified them into the coastal water mass, the cold water mass and the oceanic water mass. The first was characterized by the low temperature and the low salinity originated from China territory, the secondary was characterized by the low temperature, the low salinity and the high density originated from bottom cold water of Yellow Sea, and the third was done by the high temperature and salinity originated from Tsushima warm current. The internal discontinuous layer among them was farmed at the intermediate depth (about $5{\sim}30m$ layer). And the thermal front by upwelling region between the cold water mass and Tsushima warm current appeared in the central parts of the South Sea of Korea. The Phytoplankton community in the surface and stratified layers was a total of 44 species belonging to 26 genera. Dominant species were Prorocentrum triestinum, Scrippsiella trochoidea, Skeletonema costatum & Leptocylindrus mediterraneus. Standing crops of phytoplankton in the surface layer fluctuated between $0.3{\times}10^3$ cells/L and $10.8{\times}10^3$ cells/L. Diatoms appeared mainly in the Tsushima warm current regions, and flagellates occurred in the frontal zone and the low salinity regions where was the transfer areas of Chinese continental coastal waters. Chlorophyll a concentration by controlled phytoflagellate ratio in the South Sea of Korea was high values in the frontal zone and sub-surface layer. It was high concentration in the upwelling and coastal waters regions, but low concentration in the Tsushima warm current regions. The Chl-a maximum layers appeared in the thermochline depth or sub-surface layer lower than thermocline. The phytoplankton production in the South Sea of Korea was controlled by the expanded coastal waters of Chinese Continent which include a high concentrations of nutrients.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.4
• /
• pp.37-50
• /
• 2016

Recognizing the problem of fallacy in geographical name of Changokbyeong(蒼玉屛), assumption has been made on the location of Changokbyeong through literature research on antique maps, ancient paintings, and old prose, through field survey on rock inscriptions and landscape characteristics, and through interviews with local people. Furthermore, Baegyeonwa, the Cuckoo Hut, and Iyangjung(二養亭), an annex to the cottage, both of which were managed by Saahm Park Soon(思菴 朴淳), the Subject of Jouissance, were studied in depth with emphasis on the spatial structure as well as special features of the area as a garden. The major findings are as follows: Changokbyeong is a spatial threshold that imparts a sense of unity with Okbyeng seowon(玉屛書院) and indeed Changokbyeong is presumed to have been the frontal river terrace of Okbyeng seowon according to the analysis of antique maps and rock inscriptions. This ancient location and the Ogari Stone Wall, the present day Changokbyeong, are only 460m away so that both areas are considered as falling under the influence of Changokbyeong landscape. The expression "Changokbyeong Geupsangeum(蒼玉屛及散襟)" written in an old prose tells us that the high rock wall with Sangeumdae inscribed on the rock might be the rock wall of Changokbyeong. In addition, while not a single rock inscription has been found on the Ogari Stone Wall, 11 rock inscriptions designed and ordered by Saahm Park Soon, the Subject of Jouissance, are found on every corner of the high rock wall standing in front of Okbyeng seowon, 8 of those 11 being place names and recitative poems(known as Jeyeongsi: 題詠詩) in close formation resembling the handwritings in a little notebook. This provides a strong evidence for assuming the location of Changokbyeong to be the frontal river terrace of Okbyeng seowon. The "Songgyun Jeoljo Suwol Jeongshin(松筠節調 水月精神)" rock inscription on Changokbyeong should be considered as the stamping ground and as the symbolic language of Changokbyeong that bears the high character and nobility of the Subject of Jouissance, Saahm Park Soon. The inscription should also be recognized as the handwritings of Wooahm Song Si-Yeol(尤庵 宋時烈) correcting the misconceptions that persisted until today. Meanwhile, the garden remains of Saahm's Changokbyeong are composed of four sites: Sangeumdae-Sugyeongdae-Cheonghakdae-Baekhakdae from the left. At the back of Sangeumdae, there is the original house, the Baegyeonwa(拜鵑窩), and on the fantastically shaped stone wall at the left of Baekhakdae, there is the annex, the Iyangjung, together creating a landscape composition that overlooks the splendor of the Ogari Stone Wall. The Iyangjung is located on the highest spot to the left of the four sites, and it is believed to have been a little outhouse and library for Saahm which remains to the present day as a place where Saahm's character can be felt. The drinking plates[窪樽] made of rock that are affectionately arranged on the broad flat rock in front of Iyangjung is part of the garden remains that reflects the artistic taste of Saahm regarding the drinking culture at the time.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.20-26
• /
• 2018

It was a pilot study for developing an algorithm to determine the presence or absence of cervical spine injury by analyzing the severity factor of the patients in motor vehicle occupant accidents. From August 2012 to October 2016, we used the KIDAS database, called as Korean In-Depth Accident Study database, collected from three regional emergency centers. We analyzed the general characteristics with several factors. Moreover, cervical spine injury patients were divided into two groups: Group 1 for from Quebec Task Force (hereinafter 'QTF') grade 0 to 1, and group 2 for from QTF grade 2 to 4. The score was assigned according to the distribution ratio of cervical spine injured patients compared to the total injured patients, and the cut-off value was derived from the total score by summation of the assigned score of each factors. 987 patients (53.0%) had no cervical spine injuries and 874 patients (47.0%) had cervical spine injuries. QTF grade 2 was found in 171 patients (9.2%) with musculoskeletal pain, QTF grade 3 was found in 38 patients (2.0%) with spinal cord injuries, and QTF grade 4 was found in 119 patients (6.4%) with dislocation or fracture, respectively. We selected the statistically significant factors, which could be affected the cervical spine injury, like the collision direction, the seating position, the deformation extent, the vehicle type and the frontal airbag deployment. Total score, summation of the assigned each factors, 10 was presented as a cut-off value to determine the cervical spine injury. In this study, it was meaningful as a pilot study to develop algorithms by selecting limited influence factors and proposing cut-off value to determine cervical spine injury. However, since the number of data samples was too small, additional data collection and influencing factor analysis should be performed to develop a more delicate algorithm.

• Journal of fish pathology
• /
• v.28 no.2
• /
• pp.79-85
• /
• 2015

A specimen of porous-head eelpout Bothrocara hollandi (Zoarcidae: Perciformes) caught from the East Sea was found to harbour a myxosporean parasite. Numerous whitish pseudocysts were scattered throughout the body musculature of this individual specimen. Fresh myxosporean spores were found from the squashed pseudocysts under light microscopy. They were subspherical in frontal view with a length of $11.9(11.0{\sim}13.5){\mu}m$, width of $11.6(10.7{\sim}13.6){\mu}m$, and thickness of $7.8(6.9{\sim}8.8){\mu}m$. Two polar capsules were almost equally pyriform with a length of $4.4(3.2{\sim}5.3){\mu}m$ and width of $3.3(2.4{\sim}4.2){\mu}m$. Morphometric and host ecology analysis revealed that this myxosporean parasite could be identified as Myxobolus aeglefini Auerbach 1906. Phylogenetic analysis based on 18S rDNA sequences also revealed that M. aeglefini was clustered with M. albi and M. groenlandicus in the same branch, sharing 97.7% and 96.9% sequence similarities with M. albi and M. groenlandicus, respectively.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.75-83
• /
• 1998

This study was done to recognize the importance of errors in measurements of cephalometric radiograph and to find the anatomical structures those need special care to select as a reference points through the detection of the systematic errors and estimation of random errors. For this purose, 100 cephalometric radiographs were prepared by usual manner and 61 reference points, and 130 measurement variables were established. Measurement errors were detected and estimated by the comparison of the 25 randomly-selected samples for repeated measurements with the main sample. The following results were obtained : 1. In comparison of the repeated measurements, there were statistical significant differences in 24 variables which were 18.4% of 130 total variables. 2. The frequency of the difference in identification of the reference points between the repeated measurements was very high in the root apex of upper incisor(as), the most posterior wall of maxilla(tu), soft tissue nasion(n'), soft tissue frontal eminence(ft), and ad3 in airway. 3. After correction of reference points marking until the level of below 5% significance, the range of random errors were from 0.67 to 1.71 degree or mm. 4. The variable shown the largest random error was the interincisal angle(ILs-ILi). 5. Measurement errors were mainly caused by the lack of precision in anatomic definitions and obscure radiographic image. From the above results, the author could find the high possibility of errors in cephalometric measurements and from this point, we should include error analysis in all the studies concerning measurments. In is essential to have a concept of error analysis not only for the investigator but also for a reader of other articles.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.484-492
• /
• 2002

The selection of the maxillary anterior artificial teeth is made primarily for esthetics and they must be in harmony with the surrounding oral environment. However the selection of artificial teeth is based on the large degree of subjective judgement or the dentists, therefore, this is one of the most unscientific processes. This study was performed to determine clinically whether there is correlation among the width of the maxillary central incisor(WMCI), the intercanine distance (ICD) the facial width(FW), and the interalar nasal width(IAW) in Korean adults, and to provide the selection standards for the maxillary anterior artificial teeth. The casts were obtained from 91 undergraduate dental students(49 males and 42 females) with Angle's class I occlusion presenting well-arranged intact anterior teeth. The WMCI and ICD were measured on the casts with a vernier calipers($Miltex^{(R)}$, Germany). The photographic procedures under standardized conditions were performed to record each subject's frontal face using digital camera($Olympus^{(R)}$, C-2500L, Japan). The FW and IAW were measured with image analyzer($Image-Pro^{(R)}$ PLUS. media cybermetrics. USA). The results were obtained as follows : 1. The mean WMCI was $8.11{\pm}0.67mm$, ICD was $37.88{\pm}2.15mm$, FW was $141.29{\pm}5.84mm$. and IAW was $37.85{\pm}2.29 mm$. 2. The ratios of FW/WMCI, FW/ICD, IAW/ICD were 17.4, 3.7, 1.0 respectively. 3. All measurements(WMCI, ICD, FW, and IAW) of male group were longer than those of female group significantly in Student's t-test(p<0.01). 4. There was significant correlation between WMCI, ICD, FW, and IAW in Pearson's correlation analysis(p<0.01). 5, The relationship between IAW and ICD shows the strongest correlation among six combinations in linear regression analysis($R^2$=0.753, Y=7.046+0.815X). The FW and IAW could be very reliable guides for the selection of the maxillary anterior artificial teeth.

• Journal of Biomedical Engineering Research
• /
• v.36 no.5
• /
• pp.235-239
• /
• 2015

The purpose of this study was to investigate the unstable plate system for the advanced balance ability. 7 male volunteers (age $33.7{\pm}1.2$ years, height $174.7{\pm}3.8cm$, weight $86.0{\pm}3.6kg$, BMI $28.2{\pm}2.0kg/m^2$) performed the partial squat motion on the shape of CAP type(${\cap}$) and BOWL type(${\cup}$) plate system. The range of motion (ROM) and muscle activation were acquired by the motion analysis system and the EMG system. Results of ROMs of the CAP type plate system were shown the widely range of the deviation in the ankle joint on the sagittal plane (sagittal plane - hip joint $10.7^{\circ}$ > $5.4^{\circ}$, knee joint $16.3^{\circ}$ > $6.4^{\circ}$, ankle joint $18.8^{\circ}$ > $6.3^{\circ}$ ; transverse plane - hip joint $3.5^{\circ}$ > $1.8^{\circ}$, knee joint $5.3^{\circ}$ > $3.4^{\circ}$, ankle joint $11.3^{\circ}$ > $5.3^{\circ}$ ; frontal plane - hip joint $0.9^{\circ}$ > $0.5^{\circ}$, knee joint $0.8^{\circ}$ > $0.6^{\circ}$, ankle joint $4.8^{\circ}$ > $3.7^{\circ}$). Muscle activation results of the CAP type plate system were indicated higher in major muscles for balance performance than the BOWL type plate system (vastus lateralis 0.90 > 0.62, peroneus longus 0.49 > 0.21, biceps femoris 0.38 > 0.14, gastrocnemius 0.11 > 0.05). These findings may indicate that the CAP type plate system would expect better effectiveness in perform the balance training. This paper is primary study for developing balance skills enhancement training device.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.71-76
• /
• 2010

The purpose of this study was to investigate the changes of long term ECG response in a company with middle-aged male employees. Subjects were 60 men who were 40~55 years old. We enrolled 30 exercise group subjects into a 3-year exercise program. In measurement index, body composition was measured by % body fat and BMI. Exercise stress test analyses were measured using ST/HR slope and QRS vector. Statistical analysis was performed using analysis of repeated ANOVA. Results of this study were as follows: In ST/HR slope, the control group showed symptoms of ischemia after nine minutes of exercise. In the rest frontal axis of the QRS vector, the control group had a tendency towards right axis deviation. In the rest horizontal amplitude of the QRS vector, the control group had a tendency to show a significant decrease, but it was increased significantly in the exercise group. These findings suggest that inactive company workers was showed a decrease of exercise capacity, early diagnosis exercise-induced ST depression, and prolonged deviation of QRS vector, but that cardiac function could be elevated in active middle aged men through regular exercise program participation.

• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.2
• /
• pp.157-164
• /
• 2016

Objectives : The objective of this study was to investigate the characteristics of language profiles according to whether or not Korean children with autism spectrum disorder(ASD) also have ADHD, and to examine the relationship with executive function. Methods : Participants in the study were boys with ADHD aged 6 to 11 years who visited the clinic from January 2012 to December 2013. In this study, 25 boys with ASD were included, and completed scales included the Korean version of Autism Diagnostic Interview-Revised(K-ADI-R), Korean version of Autism Diagnostic Observation Schedule(K-ADOS), Korean ADHD Rating Scale(K-ARS), and Korean-Conners' Parent Rating Scale(K-CPRS). They also completed neuropsychological tests and assessed language profiles. Patients were categorized into two groups(with ADHD and without ADHD). T-test and Multivariate analysis of covariance (MANCOVA) was used for analysis. Results : Statistically, no difference was found in receptive and expressive language ability between the ASD groups with and without ADHD. However, a lower score in Test of Problem solving(TOPS) was observed for ASD with ADHD than for ASD without ADHD, with problem solving and finding cues showing significant differences. Conclusions : These findings suggest that language profiles in the ASD group without ADHD could be similar to those in the ASD group with ADHD, but comorbid ADHD could lead to more difficulty in linguistic ability for problem solving and could be related with executive function of the frontal lobe.