• 자동차안전학회지
• /
• 제12권4호
• /
• pp.31-38
• /
• 2020

This study is to develop the prediction model for the HIC15 in frontal vehicle crash tests. The 28 frontal impact test results of the MY2019 and MY2020 USNCAP are utilized. The metrics for evaluating the crash pulse severity such as moving average acceleration, Restraint Quotient (RQ) and ride-down efficiency are reviewed to find out whether the metrics can predict the HIC15. It is observed that the R² values based on the linear regression of all pairs between the existing metrics and the occupant injuries such as the HIC15, 3 ms chest g's and chest deflection are very low. In this study, using the vehicle crash pulses, the linear regression model for estimating the HIC15 is developed. The vehicle crash pulse is splitted seven 10 ms intervals in 70 ms after impact for extracting the average accelerations in each intervals. The prediction model can predict effectively not only the HIC15 but also the maximum head g's, chest deflection and 3 ms chest g's of 13 vehicles out of 28 vehicles.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.48-57
• /
• 2023

With the advance of autonomous vehicle technology various sitting posture is possible like relax position (inclined seating posture). Parametric study was done with MADYMO, a mutibody dynamics solver, to investigate the effect of sitting posture in different frontal crash modes, full frontal, 40% offset, and angled rigid barrier crash as well as various impact speeds. Hybrid III 50th male and 5th female dummies were used to figure out the difference induced by occupant weight and dimension. Restraint system parameters complying to current safety protocols like NCAP are studied if they still work effectively in relax position which is feasible with autonomous vehicles.

• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.75-80
• /
• 2020

In this study, we designed car frames for collision analysis using carbon fiber reinforced polymer (CFRP) as the lighter composite material. The impact conditions were 100 percent frontal impact, 40 percent frontal impact, and 90 degrees side impact. The impact analysis measured the maximum stress at velocities of 20km/h and 40km/h for each condition and evaluated the vulnerable points in the car frame. Additional supports have been designed both to improve the weak points in existing vehicle frames, and to be taken into account when new parts are assembled. Our impact analysis compared the results of maximum stress on the car frame with and without the support.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.49-57
• /
• 2008

The performance of crash cushion systems is certified through the full scale crash tests by the standard for installation and maintenance guidelines for roadside safety appurtenance. The impact severities of impacting vehicles in collision with crash cushion systems are rated by indices THIV and PHD. Crash test results are considered to study the performance of three crash cushion systems. In case of the frontal impact or the offset frontal impact, the results show that THIV values of three systems are very close to the threshold limit for the occupant protection. Also, the results show that PHD would be improper for the occupant protection performance index. In order to improve the occupant protection performance of crash cushions, ASI needs to be included in the impact severity index.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.517-518
• /
• 2007

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1156-1161
• /
• 2008

Nonlinear dynamic analysis is generally used in automobile crash analysis and structural optimization considering crashworthiness uses the results of nonlinear dynamic analysis. Automobile crash optimization has high nonlinearity and difficulty in calculating sensitivity. Recently the equivalent static load (ESL) method has been proposed in order to overcome these difficulties. The ESL is the static load set generating the same displacement field as the nonlinear dynamic displacement field at each time step in dynamic analysis. From various researches regarding the ESL method, it has been proved that the ESL method is fairly useful. The ESL method can mathematically optimize a crash optimization problem through nonlinear analysis and well developed static optimization. The ESL is applied to nonlinear dynamic structural optimization of the automobile frontal impact problem. An automobile bumper is optimized. The mass of the structure is minimized while some constraints are satisfied.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.100-105
• /
• 2022

Oblique car to car frontal impact is quite common on the road and series of studies have been done to realize this in the lab. At a certain angle of oblique crash a car (ego) is to travel at a speed of xkm/h to hit the other car(traffic) which is approaching to ego at a speed of ykm/h. Symmetry of the speed of two vehicles, x vs. y, is studied with respect to the impulse of the ego vehicle as well as occupant injury. If there is symmetry of speed of two vehicles, number of case studies needed to analyze the oblique frontal impact may decrease: ex. in the case of 30degree oblique crash 40km/h (ego) / 80km/h (traffic) will show the similar behavior as 80km/h (ego) / 40km/h (traffic) crash.

• 자동차안전학회지
• /
• 제11권4호
• /
• pp.6-15
• /
• 2019

Since introducing the offset frontal impact test in EuroNCAP in 1997, the vehicle has been constantly changing according to its usage and purpose. As of 2019, many vehicles have been released to the public, which has led to a large structural mass difference between small, medium and large vehicles. Also, the geometry of the front of the vehicle is completely different for each vehicle and tends not to be perfectly aligned at frontal collisions. The difference in mass of each of these vehicles and less performing structures for offset crashes have led to dramatically worse outcome in a car to car offset frontal impact tests. Even though a decade later passenger cars have become much safer due to consumer test programs and regulatory requirements, the aggressiveness and compatibility that can cause damage to the opponent car in the event of car to car collision is not considered in the above-mentioned section, and therefore much improvement is needed. After many years of study to solve this problem, EuroNCAP has developed a new mode MPDB offset front test that considers the aggressiveness and compatibility that can affect the opponent cars that have collided. This paper introduces the development process of aggressiveness and compatibility evaluation method of MPDB in EuroNCAP which will be implemented from 2020. Several impact tests have been conducted at different test conditions to rate the vehicle structure performance only focused on aggressiveness and compatibility of MPDB.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권1호
• /
• pp.47-57
• /
• 2016

Results from multiple high profile experiments on the parameters influencing the impacts that cause skull fractures to the frontal, temporal, and parietal bones were gathered and analyzed. The location of the impact as a binary function of frontal or lateral strike, the velocity, the striking area of the impactor, and the force needed to cause skull fracture in each experiment were subjected to statistical analysis using the JMP statistical software pack. A novel neural network model predicting skull fracture threshold was developed with a high statistical correlation ($R^2=0.978$) and presented in this text. Despite variation within individual studies, the equation herein proposes a 3 kN greater resistance to fracture for the frontal bone when compared to the temporoparietal bones. Additionally, impacts with low velocities (<4.1 m/s) were more prone to cause fracture in the lateral regions of the skull when compared to similar velocity frontal impacts. Conversely, higher velocity impacts (>4.1 m/s) showed a greater frontal sensitivity.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.129-136
• /
• 2000

In the frontal collision the spot welded hat-shaped section side member is the fundamental structure for automobiles and has a great amount of absorbing capacity. For this reason LS-DYNA3D has been used for analyzing impact collapse characteristics on hat shaped section member with respect to the valuables; thickness, width ratio and spot weld potch on impact load(7.19m/sec, 1034J). By comparing the results from simulation and the experimental results, the utilization of simulation has been certified.