• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.267-272
• /
• 1993

This paper presents the performance and problems in analysis method and testing system of Electronic Speckle Pattern Interferometry (ESPI) method, in measuring two-dimensional in-plane displacement. The anyalysis result of measurement by ESPI is quite comparable to that of measurement by strain gauge method. This implieds that the method of ESPI is a very effective tool in non-contact two-dimensional in-planc strain analysis. But there is a controversal point,measurment error. This error is discussed to be affected not by ESPI method itseif, but by its analysis scheme of the interference fringe,where the first-order interpolation has been applied to the points of strain measured. In this case, it is turned out that the more errors would be occured in the large interval of fringe. so, this paper describes a computer method for drawing when the height is available only for some arbitary collection of points, the method is based on a distance-weighted, least-squares approximation technique, with the weight varying with the distance of the data points.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.156-164
• /
• 2016

We demonstrated the pretilt angle effect on the viewing angle properties of a single-domain fringe-field switching (FFS) liquid crystal (LC) mode. By performing the Póincare sphere analysis, we investigated, in detail, the origin of the viewing angle asymmetry that exists in the single-domain FFS LC mode both in the field-on and field-off states. Using this analysis, we confirmed that the pretilt angle reduces the viewing angle symmetry in the single-domain FFS LC mode. Finally, we examined the effect of a zero pretilt angle on the viewing angle symmetry by evaluating real single-domain FFS LC cells.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.175-181
• /
• 2002

A new polariscope system involving two rotating optical elements and a digital camera for whole field fringe analysis allows automated data to be acquired quickly and efficiently. The developed phase measuring technique that uses eight images through a circular polariscope is presented for the digital measurement of isochromatics and isoclinics, respectively, from photoelastic fringes in a circular disk under diametric compression. Isochromatics can directly be obtained using wrapped isoclinic phases calculated by the arc tangent operator which is the four-quadrant operator from -$\pi$ to $\pi$. It is not required to unwrap isoclinic phases for the calculations of isochromatics. Unwrapped isoclinics are directly determined from isochromatic parameters. Distributions of digitally determined isoclinics are in close agreement to manual measurements. The errors which would appear in unwrapping process of isoclinics can be avoided in the determination of isochromatics.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1704-1713
• /
• 2003

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by image processing method for the images from an optical interferometer with monochromatic incident light. Interference between the reflected lights both on half mirror Cr coating of glass disk and on super finished ball makes circular fringes depending on the contact conditions such as sliding velocity, applied load, viscosity-pressure characteristics and viscosity of lubricant under ambient pressure. In this situation the film thickness is regarded as the difference of optical paths between those reflected lights, which make dark and bright fringes with monochromatic incident light. The film thickness is computed by numbering the dark and bright fringe orders and the intensity (gray scale image) in each fringe regime is mapped to the corresponding film thickness. In this work, we developed a measuring technique for EHL film thickness by dividing the image patterns into two typical types under the condition of monochromatic incident light. During the image processing, the captured image is converted into digitally formatted data over the contact area without any loss of the image information of interferogram and it is also interpreted with consistency regardless of the observer's experimental experience. It is expected that the developed image processing method will provide a valuable basis to develop the image processing technique for color fringes, which is generally used for the measurement of relatively thin films in higher resolution.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.120-133
• /
• 1994

홀로그래픽 간섭계측기로터 나오는 영상 데이터를 해석하는 전문가시스템에 대하여 기술하였다. 그동안 간섭 띠무늬(fringe)를 해석하는 방법들이 어느 정도의 자동화를 이룩하며 개발되어왔다. 그러나, 복잡한 간섭 띠무늬 패턴(fringe pattern)및 심한 잡음이 생기게 되는 고속도 항공공학 분야 또는 실험기계공학 분야에서는 신뢰할 만한 자동화를 이룩하기가 매우 힘들었다. 현재 사용가능한 방법중에는 간섭띠무늬 추적, 위상전이, 푸리에 변환, 회귀분석 등이 있는데, 이들은 소음제거나 데이터 수정을 하는데 있어서 극히 국부적인 정보에만 의존하였다. 결과적으로, 특별히 심한 소음이 있는 경우, 부정확한 위상중첩이나 간섭띠무늬 순차배열문제에 부딪히게 되고 따라서 작업자의 수작업이 심각하게 필요하게 된다. 본 논문에서는 간섭띠무늬 추적방법의 자동화 를 위한 새롭고 포괄적인, 규칙기반 전문가시스템에 대하여 기술하였다. 새로 개발된 전문가 시스템은 간섭띠무늬 패턴에 대한 전체적인 또는 지연적인 정보를 추출해 내고 또 전문가가 가지고 있는 지식을 이용한다. 이 전문가 시스템은 저수준 및 고수준 처리를 동시에 할 수 있도록 상호연결기구를 채택하여 간섭띠무늬를 해석하는 적절한 해결책을 마련하였다. 또한 위상전이나 푸리에 변환 방법에서 문제가 되는 자동위상 중첩에 대해 개발된 전문가 시스템의 응용의 가능성에 대해서도 기술하였다.

• 한국콘텐츠학회논문지
• /
• 제22권3호
• /
• pp.413-429
• /
• 2022

현대 관광의 시선에 대한 논의는 현대 관광객들을 포스트포드주의적이고 탈분화적 공연적 전환의 주체로 이해한다. 축제방문객은 관광객의 한 부류이기 때문에 이들 역시도 공연적 전환의 주체로 해석해 볼 수 있다. 이것은 이제 축제방문객들도 함께 축제 생산에 참여하는 주체로 이해하며, 그 존재만으로 축제의 생산과 변화를 만드는 주체로 이들 방문객들을 인식할 수 있다는 것을 뜻한다. 따라서 축제방문객들은 생산 주체로서, 상호 관계에 직접 참여하고, 그들의 일탈성에 대한 욕망을 현존을 통해 축제에 드러내는 사람들이라 할 수 있다. 또한, 현대 축제방문객들은 공연적 전환의 주체가 되어 스스로의 자율성과 유능감 그리고 관계성을 축제 속에서 획득하고자 한다. 에딘버러 프린지를 하나의 사례로, 이 축제의 '열려있음'의 가치관이 만든 규모와 다양성이 이러한 축제방문객의 공연적 전환의 시선에 부합함을 알고, 그것이 꾸준히 축제방문객들의 방문을 유도하는 원인임을 보이고자 한다.

• 비파괴검사학회지
• /
• 제21권2호
• /
• pp.189-196
• /
• 2001

광탄성법은 전체적인 응력장 해석을 위하여 가장 많이 사용되는 방법중의 하나이다. 광탄성법에서 주응력의 차이와 방향은 등색선과 등경선으로 나타난다. 재래식 방법으로는 주응력 방향은 평면 편광기의 편광자와 검광자를 동시에 회전시켜 수작업으로 측정하며, 이를 타디보간법이라 한다. 이러한 방법은 전체적인 응력장 해석시 매우 번거로우며 많은 시간이 걸린다. 재래식 광탄성법에서는 광탄성 프린지로부터 등경선을 분리시킬 수 없다. 본 연구에서는 광탄성이론을 Jones행렬로 나타내고 4단계와 8단계의 위상이동법에 대해서 기술하였다. 컴퓨터시뮬레이션을 통하여 압축하중을 받는 원형디스크의 광탄성 프린지로부터 등경선과 등색선을 분리시킬 수 있는 시험을 하였다. 디스크의 프린지는 응력-광 법칙에 의하여 생성하였다. 8단계 위상이동법으로 얻은 등경선과 등색선의 크기를 이론으로 계산한 값과 비교하였다. 컴퓨터 시뮬레이션으로부터 광탄성 프린지로부터 등경선과 등색선을 분리시킬 수 있는 가능성을 예시하였다.

• 한국조경학회지
• /
• 제30권1호
• /
• pp.1-10
• /
• 2002

The purpose of this article is to examine land use change in the fringe area of a metropolitan city through multi-temporal data analysis. Change detection has been regarded as one of the most important applications for utilization of remotely sensed imageries. Conventionally, two images were used for change detection, and Arithmetic calculators were generally used on the process. Meanwhile, multi-temporal change detection for a large number of images has been carried out. In this paper, a digital land-use map and three Landsat TM data were utilized for the multi-temporal change detection Each urban area map was extracted as a base map on the process of multi-temporal change detection. Each urban area map was converted to bit image by using boolean logic. Various urban change types could be obtained by stacking the urban area maps derived from the multi-temporal data using Geographic Information System(GIS). Urban change type map was created by using the process of piling up the bit images. Then the urban change type map was compared with each land cover map for the change detection. Dalseo-gu of Daegu city and Hwawon-eup of Dalsung-gun, the fringe area of Daegu Metropolitan city, were selected for the test area of this multi-temporal change detection method. The districts are adjacent to each other. Dalseo-gu has been developed for 30 yeais and so a large area of paddy land has been changed into a built-up area. Hwawon-eup, near by Dalseo-gu, has been influenced by the urbanization of Dalseo-gu. From 1972 to 1999, 3,507.9ha of agricultural area has been changed into other land uses, while 72.7ha of forest area has been altered. This agricultural area was designated as a 'Semi-agricultural area'by the National landuse Management Law. And it was easy for the preserved area to be changed into a built-up area once it would be included as urban area. Finally, the method of treatment and management of the preserved area needs to be changed to prevent the destruction of paddy land by urban sprawl on the urban fringe.

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.424-435
• /
• 1991

To develop the photoelastic experiment method for the orthotropic material under pure torsional moment is the main objective of this research. In the development of photoelastic experiment for orthotropic material under pure torsional moment, the important problems and their solutions are the same as following. In the model material for photoelastic experiment, it was found that C.F.E.C.(Copper Fiber Epoxy Composite) can be used as the model material of photoelastic experiment for orthotropic material. In the stress freezing cycle, it was assured that stress freezing cycle for epoxy can be used as the stress freezing cycle of the photoelastic experiment for orthotropic material. In the slicing method, it was found that the negative oblique slicing method can be effectively used as slicing method in 3-dimensional photoelastic experiment. In the measuring method of stress fringe values and physical properties in the high temperature, it was found that stress fringe values can be directly measured by experiment and physical properties can be directly or indirectly by equation between stress fringe values and physical properties developed by author. In the stress analysis method of orthotropic material under pure torsional moment by photoelastic experiment, it will be studied in the second paper.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.48-74
• /
• 1995

Since heat curing acrylic resins undergo unavoidable dimensional changes following polymerization, adaptation can be altered. Until recently, although numerous studies on the dimensional changes of denture base were based on a microscopic technic that measures the relative displacement of a limited reference points on the denture base, but there have been few studies on the distortions of resins using holographic interferometry. Purpose of this study was to determine and compare the dimensional changes and fringe patterns of 4 heat curing acrylic resins, and observe the distortions of acrylic resin denture base by temperature change with the aid of the holographic interferometry. Holographic interferograms were taken on the resin specimens and acrylic resin denture base with the 10mW He-Ne laser and double exposure method. Comparison and analysis of fringe pattern on the recorded object surface was performed. The following results were obtained. 1. The dimensional changes for the high impact resin Lucitone 199 were statistically the greatest of all resins, and the rapid heat curing resin Premium super 20 were the least. 2. The most polymerization shrinkage of all materials occured in initial period of measurements, at this time the difference of polymerization shrinkage properties between resins was founded. 3. The stress distribution of specimens was seen by various type of fringe pattern which had directionality. 4. The polymerization shrinkage of resins was greatly influenced by temperature change. 5. The partial deformations of resin denture base were observed in 70 C and 90 C water.