• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.32-33
• /
• 2009

We propose viewing angle switchable liquid crystal display(LCD) associated with fringe-field switching (FFS) mode with high aperture ratio characteristic. This device is composed of R(red), G(green), B(blue), pixel and W(white) pixel in which R,G,B pixel shows image and white pixel for both viewing angle control and image. Conventional viewing angle controllable liquid crystal display has not transmittance because the liquid crystal only tilts up without rotates in viewing angle control region. In this paper, we suggested that the device has high transmittance characteristic because the LC directors are rotated in which viewing angle control region are generated fringe electric field.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.724-728
• /
• 2005

Electro-optic characteristics of reflective hybrid aligned liquid crystal (LC) cell driven by fringe field using a nematic LC with positive dielectric anisotropy have been studied. Optimized optical configurations are achieved by using a single polarizer, half-wave film and a cell with quarter-wave retardation. The simulation results shows an optimum cell retardation of $0.30{\mu}m$. This value may allow a practical cell gap larger than $3{\mu}m$, which makes it easy to control in the manufacturing process. Furthermore, this LC cell with optimized cell parameters shows low wavelength dispersion and the contrast ratio greater than 5 over exists about $100{\circ}$ in vertical direction and $160{\circ}$ in horizontal direction. Also, when using the LC with positive dielectric anisotropy rather than negative dielectric anisotropy, the display shows low power consumption and fast response time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.720-723
• /
• 2005

We studied the quantitativity of the image sticking which is occured by the resicual DC in the fringe-electric field switching (FFS) mode. Actually, in the FFS mode driven by the strong fringe electric field, the asymmetric residual DC was formed in the bottom substrate. It made the impurity ion stick to the alignment layer such as polyimde layer. Thus, the differnece of the luminance existes after the stress check pattern is applied to the panel so that we can see the image sticking. This image sticking decreases as the residual DC value between specific patterns decreases. Therefore, it is necessary to control the residual DC for the FFS mode with the high image quality. It is possible to eliminate the image stiking when the extra pixel voltage is applied through the circuit tunning for reducing the difference of residual DC accroding to the panel position.

• Journal of Environmental Science International
• /
• v.13 no.5
• /
• pp.441-448
• /
• 2004

The purpose of this research was to investigate and analyse the internal structural organisation of UK's urban fringe management initiatives and its roles. Caerphilly Mountain Countryside Service and Thames Chase Community Forest Initiatives were investigated. The Caerphilly Mountain Countryside Service Initiative operates through a tiered structure consisting of the Caerphilly Mountain Joint Committee, the Officers' Working Party, and the management team. The Thames Chase Community Forest Initiative is operated through a tiered structure comprising the Thames Chase Joint Committee and the management team. Although the role of each management initiative is invested differently in certain internal organisational bodies, such as the governance body and the management body, what is common to all the urban fringe management initiatives is that the governance body within each management initiative tries to speak with one voice to bring about an effective operation process, and the management team employs a variety of devices to secure the enrolment of a variety of interest groups in its operational processes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.12
• /
• pp.1200-1207
• /
• 2007

An experimental test is presented for photoelastic stress analysis around a crack tip in tensile loaded plate. The hybrid method coupling photoelastsic fringe inputs calculated by finite element method and complex variable formulations involving conformal mappings and analytical continuity is used to calculate full-field stress around the crack tip in uniaxially loaded, finite width tensile plate. In order to accurately compare calculated fringes with experimental ones, both actual and regenerated photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. Regenerated fringes by hybrid method are quite comparable to actual fringes. The experimental results indicate that Mode I stress intensity factor analyzed by the hybrid method are accurate within three percent compared with ones obtained by empirical equation and finite element analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.80-86
• /
• 2001

This paper proposes a precision displacement measuring method of detecting fringe movement of interferograms with a nanometric resolution. It is well known that the laser interferometer plays a useful and essential role in scientific and industrial application, but they have such error sources as an unequal gain of detectors, imbalanced beams, and lack of quadrature. These error sources degrade the accuracy of the interferometer. However, the fringe movement of interferograms has little relation with these error sources. In order to investigate performance of the proposed method. analysis and simulation were executed over random noise and wavefront distorion. Results of the simulation show that the proposed method is robust against these errors. Experiment was implemented to verify this method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.61-62
• /
• 2009

Electro-optical properties of liquid crystal display (LCD) using fringe-field switching (FFS) devices depend on many parameters such as cell retardation, electrode structure, magnitude and sign of dielectric anisotropy, rubbing angle and cell gap. In this paper, the light efficiency of FFS device depending on magnitude of positive dielectric anisotropy with other cell parameters such as rubbing angle and angle and cell gap have been explored compared with FFS device using LC with negative dielectric anisotropy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.422-423
• /
• 2018

In this paper, we implement Frenelet transform for decomposition of the fringe pattern and analyze its characteristics. The implemented wavelet-like basis functions are well suited for reconstruction and processing of optically generated Fresnel holograms. After analyzing the characteristics of the B-spline function, we will discuss the wavelet-like multi-resolution analysis method. Through this process, we implemented a transform tool that can decompose fringe patterns effectively. We have implemented a B-spline function with various decomposition properties and showed the results of decomposing the fringe pattern.

• Journal of Integrative Natural Science
• /
• v.3 no.3
• /
• pp.168-173
• /
• 2010

Novel porous silicon chip exhibiting dual optical properties, both Frbry-Perot fringe (optical reflectivity) and photoluminescence had been developed and used as chemical sensors. Porous silicon samples were prepared by an electrochemical etch of p-type sillicon wafer (boron-doped, <100> orientation, resistivity 1 - 10 ${\Omega}$). The ething solution was prepared by adding an equal volume of pure ethanol to an aqueous solution of HF (48% by weight). The porous silicon was illuminated with a 300 W tungsten lamp for the duration of etch. Ething was carried out as a two-electrode Kithley 2420 preocedure at an anodic current. The surface of porous silicon was characterized by FT-IR instrument. The porosity of samples was about 80%. Three different types of porous silicon, fresh porous silicon (Si-H termianated), oxidized porous silicon (Si-OH terminated), and surface-derivatized porous silicon (Si-R terminated), were prepared by the thermal oxidation and hydrosilylation. Then the samples were exposed to the wapor of various organics vapors. such as chloroform, hexane, methanol, benzene, isopropanol, and toluene. Both reflectivity and photoluminescence were simultaneously measured under the exposure of organic wapors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.972-975
• /
• 2003

We have performed computer simulation to obtain electro-optic characteristics of reflective hybrid aligned nematic liquid crystal displays driven by fringe field. The results show that the optimal retardation value of the cell is $0.289{\mu}m$, which allows for the cell to have a practical cell gap of larger than $3{\mu}m$ when manufacturing. A reflectance of the dark state is only 0.114% for an incident light 550nm. At this condition, the light efficiency of white state reaches 92.7%. Further, we have studied a new reflective display with polarizer, optical compensation with half plate, LC plus reflector. The display with optimized cell parameters shows low wavelength dispersion and the contrast ratio greater than 5 over exists about $120^{\circ}$ in vertical direction and $160^{\circ}$ in horizontal direction.