• 한국포장학회지
• /
• 제25권3호
• /
• pp.131-137
• /
• 2019

Carton clamps, one of forklift attachments, allow users to quickly handle shipping units such as unitized loads, large shipping cases, or crates without the requirement of pallets. As the use of palletless handling by clamp trucks increases, so does the need for simulation research on clamp truck handling. The frictional characteristics for various contact conditions of corrugated paperboards and their constituent boards were analyzed to obtain the data needed in the computer simulation for the handling of carton clamp truck. The overall mean of static-frictional coefficients between selected corrugated paperboards was 0.38 (±0.01), which was 1.3~1.6 times greater than 0.23~0.29 of the frictional coefficients between boards. The overall mean of static-frictional coefficients between the corrugated paperboards and the rubber contact pad was 0.82 (±0.02), which was about 1.1 to 2.8 times greater than 0.29~0.78 of the static-frictional coefficient between the linerboard and the rubber contact pad. The overall mean of kinetic-frictional coefficients between the corrugated paperboards was 0.35 (±0.01), and 0.76 (±0.02) between the corrugated paperboards and the rubber contact pad.

• 한국의류산업학회지
• /
• 제4권3호
• /
• pp.273-283
• /
• 2002

In this study, the correlations of the two frictional testers have been investigated; one is the KES-FB4 system, the other is the Fabric-on-Fabric Frictional tester which was devised by authors. According to the results, the correlation between the frictional coefficients measured by the two testers has been shown highly as the load increased. But the effect of roughness of fabric surface was not dearly revealed in this study. The frictional characteristics of fabric woven from filament yarns were different with those of fabric woven from spun yarns. And, like the other materials, the effect of load on fabrics used in this experiment was related with the frictional force between two fabrics. The frictional behaviors, however, were obviously different with harder material because the frictional coefficients were not constant as the load increased.

• 감성과학
• /
• 제8권4호
• /
• pp.385-391
• /
• 2005

화장품을 바를 때 피부와 손가락 사이에서 일어나는 마찰계수는 화장품의 주관적 평가에 많은 영향을 주는 요소이다. in-vivo상태에서 피부와 접촉자 간의 마찰계수는 접촉자의 모양이나 거칠기의 정도 그리고 누르는 하중에 따라 변할 수 있다. 본 실험에서는 리니어 모터와 다축 로드셀을 이용하여 여러 가지 접촉자를 in-vivo상태에서 직접 피부에 접촉시키고 실시간으로 마찰계수를 측정할 수 있는 장치를 개발하였다. 이 장치를 이용하여 피부와 접촉자 간의 마찰계수를 측정하고 그 데이터를 화장품을 바를 때의 전후와 비교$\cdot$분석하였다. 또한 화장품을 바를 때 주관적인 평가에서 이용되는 형용사를 조사하며 마찰계수와의 그 상관관계를 분석하였다. 그 결과, 피부와 접촉자 간의 마찰계수는 화장품의 종류와 접촉자의 성질에 따라 0.17-1.2사이에서 나타나며, 주관적인 평가 또한 화장품을 바른 후 시간의 경과함에 따라 변하며, 그것은 마찰계수와 관련이 있음을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제25권10호
• /
• pp.137-143
• /
• 2008

The objective of this study was to characterize the role of synovial fluid and hyaluronan in the frictional response of bovine articular cartilage. Seven cylindrical cartilage specimens were harvested from three fresh bovine humoral heads (4-6 months old). Reciprocal sliding motion (1mm/s) was provided by a custom-made friction testing apparatus with a normal load of 22.3 N. From the measured time-dependent normal and frictional forces, the minimum and maximum frictional coefficients were calculated. Synovial fluid reduced the minimum frictional coefficient by ${\sim}75$ % and maximum frictional coefficient by ${\sim}11%$, while the reduction of the minimum and maximum frictional coefficients with hyaluronan was ${\sim}42%$ and ${\sim}24%$, respectively. To the best of our knowledge, this experimental study investigates the first such comparisons of frictional response of articular cartilage with and without synovial fluid and hyaluronan, and provides significant insights into their role in the articular cartilage friction and lubrication.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.481-485
• /
• 2003

This study describes the real-time measurement system which consist of multi-components load cell and linear motor. Operationg and data acquisition is controlled by PC. Multi-components load cell measures simultaneously the vertical force Fz and frictional force Fx when contactors move on sample surface. Linear motor is used to translate with constant speed without vibration. The frictional coefficient is calculated by Matlab$^{TM}$. The frictional coefficients between Al. plates. and fingertip and fabrics are measured.d.

• 로봇학회논문지
• /
• 제6권3호
• /
• pp.284-291
• /
• 2011

This paper presents the estimation of the frictional coefficient of the wheel-legged robot with hip joint actuation producing maximum tractive force. Slip behavior for wheel-legged robot is analytically explored and physically understood by identification of the non-slip condition and derivation of the torque limits satisfying it. Utilizing results of the analysis of slip behavior, the frictional coefficients of the wheel-legged robot during stance phase are numerically estimated and finally this paper suggests the pseudo-algorithm which can not only estimate the frictional coefficients of the wheel-legged robot, but also produce the candidate of the touch down angle for the next stance.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.56-64
• /
• 2000

A friction force measurement system using the floating liner method was developed to study the frictional behavior of piston rings. The measurement system was carefully designed to control the effect of the piston secondary motion and the temperature of cylinder wall and oil. The friction force between the barrel shaped piston ring and the cylinder liner, was measured under the condition of flooded oil supply. The measured friction forces were classified into five frictional modes with regard to the combination of predominant lubrication regimes(boundary, mixed and hydrodynamic lubrication) and stroke regions(midstroke and dead centers). The modes could be identified on the Stribeck diagram of the friction coefficients and the dimensionless number of ㎼/p, where the friction coefficients are evaluated at near the midstroke and dead centers.

• 한국항공운항학회지
• /
• 제14권3호
• /
• pp.16-22
• /
• 2006

The friction and wear of tire determined by frictional behavior of tire tread that translate driving force, cornering force and braking force between automobile and road as a result of frictional behavior of each tread block. The tire tread block is representative case of rubber block doing frictional behavior. In this paper, frictional behavior of rubber block under compressive force and shear force was analytically obtained by using slip starting position parameter instead of friction coefficient which is uncertain to express exact value between rubber and other surfaces yet. And local coefficients of friction were calculated as a function of compressive force, shear force, shear modulus of rubber, shape factor and slip starting position.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.119-125
• /
• 2008

The objective of this study was to compare micro-scale friction coefficients with and without synovial fluid, and micro-scale measurements were performed using atomic force microscopy (AFM) with a $5{\mu}m$ spherical probe. Four cylindrical cartilage specimens were harvested from two fresh bovine humeral heads (4-6 months old). $Average{\pm}standard$ deviation values of the micro-scale AFM frictional coefficients calculated from the liner fit of friction versus normal force was $0.177{\pm}0.012$ and $0.130{\pm}0.010$ with and without synovial fluid coating on AFM probe respectively, showing its reduction by ${\sim}27%$ with synovial fluid. To the best of our knowledge, this experimental study investigates the first such comparisons of frictional response of articular cartilage with and without synovial fluid coating on AFM probe, and provides significant insights into the role of synovial fluid in the articular cartilage friction and lubrication independently of the confounding effect of fluid pressurization in the articular cartilage.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.535-541
• /
• 2023

Friction material, an integral constituent of bearing supports, facilitates frictional interactions between two components. Polytetrafluoroethylene (PTFE), a commonly employed friction material in bearing supports, has assessed resultant friction equilibrium. Nonetheless, protracted utilization diminishes frictional performance as the lubricating agent is progressively depleted. Friction materials can affect the entire structural system. Hence, this study applied ceramic material as a friction material due to its high strength, low friction, and low deformation. The frictional behavior was investigated using a cyclic friction test, considering various friction materials as the primary design variables and examining their covariance in cyclic frictional movements. The results substantiated that the ceramic friction material yielded a low variance and friction coefficients in cyclic frictional movements.