• 한국전산구조공학회논문집
• /
• 제36권2호
• /
• pp.105-112
• /
• 2023

본 연구에서는 마찰모델에 따라 다른 마찰진자시스템(FPS)이 적용된 교량의 성능을 비교·분석하기 위해 구조해석을 수행하였다. 마찰해석모델 별 성능을 분석하기 위해 PVDF/MgO 마찰재의 마찰계수를 활용하여 쿨롱 마찰모델과 속도 의존 마찰모델을 구축했다. 쿨롱 마찰모델은 마찰속도와 관계없이 단일 마찰계수를 사용하며, 속도 의존 마찰모델은 마찰속도에 따른 마찰계수의 변화를 반영하는 마찰모델이다. 지진해석으로 비선형 시간 이력 해석과 지진 취약도 해석을 수행하여 구조물의 응답을 확인하였다. 마찰모델에 따른 바닥판과 교각의 지진 응답을 활용해 면진된 교량의 성능을 분석하였으며, 면진된 교량의 성능을 효과적으로 평가할 수 있는 마찰모델을 분석했다.

• 한국전산유체공학회지
• /
• 제13권1호
• /
• pp.21-27
• /
• 2008

A numerical study for laminar flow in the entrance region of helical tubes for uniform inlet velocity conditions is carried out by means of the finite volume method to investigate the effects of Reynolds number, pitch and curvature ratio on the flow development. This results cover a curvature ratio range of 1/10$\sim$1/320, a pitch range of 0.0$\sim$3.2, and a Reynolds number range of 125$\sim$2000. It has been found that the curvature ratio does significantly effect on the angle of flow development, but the pitch and Reynolds number do not. The characteristic angle $\phi_c(=\phi/\sqrt{\delta})$, or the non-dimensional length $\overline{l}(=l\sqrt{\delta}cos(atan\lambda)/d)$ can be used to represent the flow development for uniform inlet velocity conditions. In uniform inlet velocity conditions, the growth of boundary layer delays the flow development attributed to centrifugal force, and in which conditions the amplitude of flow oscillations is smaller than that in parabolic inlet velocity conditions. If the pitch increases or if the curvature ratio or Reynolds number decreases, the minimum friction factor and the fully developed average friction factor normalized with the friction factor of a straight tube and the flow oscillations decrease.

• Wind and Structures
• /
• 제19권5호
• /
• pp.505-522
• /
• 2014

While effects of the atmospheric boundary layer flow on engineering infrastructure are more or less known, some local transient winds create difficulties for structures, traffic and human activities. Hence, further research is required to fully elucidate flow characteristics of some of those very unique local winds. In this study, important characteristics of observed vertical velocity profiles along the main wind direction for the gusty Bora wind blowing along the eastern Adriatic coast are presented. Commonly used empirical power-law and the logarithmic-law profiles are compared against unique 3-level high-frequency Bora measurements. The experimental data agree well with the power-law and logarithmic-law approximations. An interesting feature observed is a decrease in the power-law exponent and aerodynamic surface roughness length, and an increase in friction velocity with increasing Bora wind velocity. This indicates an urban-like velocity profile for smaller wind velocities and rural-like velocity profile for larger wind velocities, which is due to a stronger increase in absolute velocity at each of the heights observed as compared to the respective velocity gradient (difference in average velocity among two different heights). The trends observed are similar during both the day and night. The thermal stratification is near neutral due to a strong mechanical mixing. The differences in aerodynamic surface roughness length are negligible for different time averaging periods when using the median. For the friction velocity, the arithmetic mean proved to be independent of the time record length, while for the power-law exponent both the arithmetic mean and the median are not influenced by the time averaging period. Another issue is a large difference in aerodynamic surface roughness length when calculating using the arithmetic mean and the median. This indicates that the more robust median is a more suitable parameter to determine the aerodynamic surface roughness length than the arithmetic mean value. Variations in velocity profiles at the same site during different wind periods are interesting because, in the engineering community, it has been commonly accepted that the aerodynamic characteristics at a particular site remain the same during various wind regimes.

• 한국터널지하공간학회 논문집
• /
• 제9권2호
• /
• pp.121-131
• /
• 2007

최근 암반구조물의 규모가 점차 대형.대단면화됨에 따라 암반 절리면이 자유면에 노출되는 경우가 빈번하게 발생할 수 있으며 지진, 발파와 같은 외부 동적 하중의 영향을 받을 가능성이 커지고 있으므로 다양한 동적 하중조건 하에서 암반 불연속면의 거동 특성 파악을 위한 연구의 필요성이 증대되고 있다. 본 연구에서는 전단속도의 변화에 따른 편평한 화강암 전단면의 마찰특성 변화를 알아보고자 다양한 조건하에서 직접전단시험을 수행하였다. 수행한 직접전단시험은 크게 두 가지로 나눌 수 있는데 첫 번째 시험에서는 시험이 수행되는 동안 각각 7가지의 일정한 전단속도로 전단변위가 발생되도록 하여 전단속도에 따른 마찰계수의 변화를 살펴보았으며, 두 번째 시험에서는 전단변위가 발생되는 중간에3가지 형태의 순간적인 전단속도 변화가 마찰특성에 미치는 영향을 살펴보았다. 수직응력과 전단속도의 변화에 따른 편평한 화강암의 마찰계수 변화는 가해진 수직응력 수준에 영향을 받는 것으로 나타났으며, 전단속도의 변화가 마찰거동에 영향을 미치기 시작하는 전이속도는 수직응력이 증가함에 따라 낮아지는 것으로 나타났다. 또한 전단속도가 느릴수록 stick-slip 거동에서의 응력 저하 폭이 커지는 경향을 보였다. 순간적인 전단속도 변화에 따른 정상 상태에서의 마찰계수 변화를 살펴본 결과 순간적인 속도의 증가에 따라 마찰계수가 감소하는 속도 연화 현상이 나타났으며, 느린 전단속도에서 전단속도의 변화에 따른 마찰계수의 감소폭이 빠른 전단속도에서의 변화에 따른 감소폭보다 더 큰 경향을 보였다.

• 한국해안해양공학회지
• /
• 제12권3호
• /
• pp.130-138
• /
• 2000

일방향흐름에 의한 해류의 마찰력 계산을 위하여 Prandtl의 혼합길이 이론을 수심 전구간에 적용하고 난류의 세기와 수리조건에 따라 완난류와 전난류로 분류하여 마찰계수를 산정하는 개수로 마찰계수 산정방법을 제시하였다. 파랑과 해류의 합성류에 의한 해저마찰력을 계산하기 위하여 두 유속의 연직분포를 고려한 BYO 모형을 이러한 흐름특성을 반영하여 개선하였다. BYO 모형은 모든 유속의 연직분포가 해저면으로부터의 직선과 접선으로 만나는 점(Bijker point)을 도출하여 파운동 유속과 해류유속의 합성을 이 점에서 시행하여 일주기의 평균갑을 구하는 모형이다. 일방향흐름의 해류나 천해파에 의한 파운동이나 해저면 가까이 경계층흐름은 완난류, 천이난류, 전난류 등 세가지 종류로 대별된다. 그 중 완난류로 대별하여 두 경우에 대한 합성류 마찰력 산정방법을 제시하였다.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.583-590
• /
• 1998

This study was performed to determine the kinetic friction coefficient bulk density, dynamic and static angle of repose, and terminal velocity of the chopped rice straw in the moisture range of 8~23%, which could be used for better design and operation of the processing machinery and handling facilities. Friction coefficient was determined from the horizontal traction force measured by pulling the container holding the mass of rice straw on the various plate materials. Bulk density was measured with an apparatus consisting of a filling funnel and a receiving vessel. Dynamic angle of repose was calculated from the photos of bulk samples piled by gravity flow on a circular platform. Static angle of repose was determined by measuring the side angle of the bulk material which was left in the cylindrical container after natural discharge of the bulk sample through a circular hole in the bottom plate. Kinetic friction coefficients of rice straw on the PVC, mild steel, stainless steel, and galvanized steel were in the range of 0.303~0.434, 0.222~0.439, 0.204~0.448, and 0.206~0.407, respectively. and indicated linear increase with moisture content. The effects of moisture change on the friction coefficients were in the order of PVC, mild steel, galvanized steel, and stainless steel. Bulk density, dynamic and static angle of repose, and terminal velocity were in the range of 56.8~60.3 kg/m$^3$, 41.4~45.9$^{\circ}$, 94.4~100.8$^{\circ}$, and 1.07~4.48 m/s, respectively, and were increased linearly with the moisture content.

• International Journal of Automotive Technology
• /
• 제5권1호
• /
• pp.61-67
• /
• 2004

This paper suggests two simple two-degree-of-freedom models to describe the dynamical interaction between the pad and the disc of a disc brake system. Separate models for in-plane and out -of-plane vibration are described. Although a brake pad and disc have many modes of vibration, the interaction between a single mode of each component is considered as this is thought to be crucial for brake noise. For both models, the pad and the disc are connected by a sliding friction interface having a velocity dependent friction coefficient. In this paper, it is shown that this friction model acts as negative damping in the system that describes the in-plane vibration, and as negative stiffness in system that describes the out-of-plane vibration. Stability analysis is performed to investigate the conditions under which the systems become unstable. The results of the stability analysis show that the damping is the most important parameter for in-plane vibration, whereas the stiffness is the most important parameter for the out-of-plane vibration.

• 대기
• /
• 제17권4호
• /
• pp.315-326
• /
• 2007

The effects of windbreaks on the reduction of suspended particles are investigated using a computational fluid dynamics (CFD) model with the ${\kappa}-{\varepsilon}$ turbulence closure scheme based on the renormalization group (RNG) theory. In the control experiment, the recirculation zones behind the storage piles are generated and, as a whole, relatively monotonous flow patterns appear. When the windbreaks with the 0% porosity are constructed, the recirculation zones are generated by the windbreaks and very complicated flow patterns appear due to the interference between the windbreaks and storage piles. The porosity of the windbreaks suppresses the generation of the recirculation zone and decreases the wind velocity in the windbreaks as well as that outside the windbreaks. As the emission of suspended particles from the storage piles are closely related with the friction velocity at the surfaces of the storage piles, variation of the friction velocity and total amount of the emission of the suspended particles with the height and porosity of the windbreaks are investigated. The results show that higher and more porous windbreaks emit less suspended particles and that the reduction effect of the porosity is still more effective than that of the height. In the case of the windbreak with 30 m height and 50% porosity, friction velocities above the storage piles are smaller than the critical friction velocity above which particles would be suspended. As a result, total amount of suspended particles are much fewer than those in other cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.108.5-108
• /
• 2001

The research of friction compensation control system seeks the accuracy, the velocity increase of the table, and the settling time reduction. The friction is the disturbance which has the greatest influence, but the past research of control system doesn´t perform exact modeling of the friction. So this research aims at the friction compensation control system, the exact modeling of the friction, comparison between the model simulation and experimental data, and the design of observer for the friction estimation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.479-482
• /
• 2007

This paper presents experimental analysis of a friction-driven wheel responsible for generating wheel squeal. Creep and squeal noise generating mechanism are influenced by friction conditions of attack angle, loading force, driving velocity and surface roughness. Squeal noise phenomena has been examined under the laboratory condition by the model rig. Creep characteristics and squeal noise were observed by varying relative velocity of the wheel with respect to the rail and friction coefficient.