• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.19-26
• /
• 2012

Rolling contact fatigue of an urban railway wheel was analysed during its rolling. A FEM analysis was performed using a 3D modelling of rail and wheel, considering the slope of the rail and nonlinear isotropic and kinematic hardening behavior of the rail and the wheel. The maximum von-Mises stress and contact pressure between the rail and wheel were 656.9 MPa and 1111.4 MPa, respectively, under axial load of 85 kN with friction coefficient of 0. The fatigue initiation life prediction relationships by strain-lifetime (${\varepsilon}$-N) and Smith-Watson-Topper method were drawn for the wheel steel as follows: $N_i=7.35{\times}10^6{\times}SWT^{-3.56}$ and $N_i=5.41{\times}10^{-9}{\times}(\frac{{\Delta}{\varepsilon}}{2})^{-5.77}$. The fatigue lifetimes of the wheel due to rolling contact were determined to be infinite by ${\varepsilon}$-N and SWT methods.

• 중소기업융합학회논문지
• /
• 제4권1호
• /
• pp.17-29
• /
• 2014

무선 캡슐 내시경은 소장 질환을 진단하는 등의 어려움을 해결하는 진화 의료 기기로서 중요한 역할을 했다. 그것은 제한된 크기와 기능 때문에 몇 가지 단점이 있다. 가장 큰 장애물은 자기 운동 장애에서 속도 문제를 제공할 수 없다는 점이다. 따라서, 인간의 소화 시스템의 특성을 간단히 내시경 역학의 정보를 얻기 위해, 특히 소장을 소개한다. 조건 추출을 확인하기 위해서 LuGre 모델이라는 새로운 동적 마찰 모델을 도입하고 명확하게 특성 및 모델의 사용을 얻기 위하여 분석한다. 캡슐 내시경의 실제 상황과 관련된 매개 변수의 고려하여 매트랩 시뮬링크는 모델을 작성하는 데 적용하고 기능을 발견 할 수있는 시뮬레이션을 통해 확인하였다.

• 한국자기학회지
• /
• 제20권4호
• /
• pp.149-152
• /
• 2010

평판형 전자기 엑츄에이터는 이동코일과 가이드 사이의 마찰이 없기 때문에 초정밀 제품에 널리 사용된다. 전자기 엑츄에이터의 성능 검증에 가장 많이 사용되는 방법 중 한 가지는 유한요소해석 방법이다. 하지만 유한요소해석 방법은 해석 시간이 많이든다는 단점이 있다. 유한요소해석 방법의 대안으로 계산시간은 짧지만 높은 정확도의 해석 결과를 도출해 낼 수 있는 집중매개 변수모델 해석방법이 많이 사용되고 있다. 본 논문에서는 평판형 전자기 엑츄에이터의 집중매개변수 모델링을 생성하고 시뮬레이션을 통해 성능을 검증하고 그 결과를 유한요소해석 결과와 비교해 본다.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.151-159
• /
• 2020

This paper presents an evaluation of shear transfer across cracks in reinforced concrete through finite element modelling (FEM) and analytical predictions. The aggregate interlock is one of the mechanisms responsible for the shear transfer between two slip surfaces of a crack; the others are the dowel action, when the reinforcement contributes resisting a parcel of shear displacement (reinforcement), and the uncracked concrete comprised by the shear resistance until the development of the first crack. The aim of this study deals with the development of a 3D numerical model, which describes the behavior of Z-type push-off specimen, in order to determine the properties of interface subjected to direct shear in terms cohesion and friction angle. The numerical model was validated based on experimental data and a parametric study was performed with the variation of the concrete strength. The numerical results were compared with analytical predictions and a new equation was proposed to predict the maximum shear stress in cracked concrete.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.983-1001
• /
• 2017

The extent by which economy and safety concerns can be addressed in earth retaining structure design depends on the accuracy of the assumed failure surface. Accordingly, this study attempts to investigate and quantify mechanical backfill properties that control failure surface geometry of cohesionless backfills at the active state for translational mode of wall movements. For this purpose, a small scale 1 g physical model study was conducted. The experimental setup simulated the conditions of a backfill behind a laterally translating vertical retaining wall in plane strain conditions. To monitor the influence of dilative behavior on failure surface geometry, model tests were conducted on backfills with different densities corresponding to different dilation angles. Failure surface geometries were identified using particle image velocimetry (PIV) method. Friction and dilation angles of the backfill are calculated as functions of failure stress state and relative density of the backfill using a well-known empirical equation, making it possible to quantify the influence of dilation angle on failure surface geometry. As a result, an empirical equation is proposed to predict active failure surface geometry for cohesionless backfills based on peak dilatancy angle. It is shown that the failure surface geometries calculated using the proposed equation are in good agreement with the identified failure surfaces.

• 터널과지하공간
• /
• 제5권1호
• /
• pp.1-10
• /
• 1995

The behavior of a jointed rock mass depends mainly on the geometrical and mechanical properties of joints. The failure mode of a rock mass and kinematics of rock blocks are governed by the orientation, spacing, and persistence of joints. The mechanical properties such as dilation angle, shear strength, maximum closure, strength of asperities and friction coeffiient play important roles on the stability and deformation of the rock mass. The normal and shear behaviour of a joint are coupled due to dilation, and the joint deformation depends also on the boundary conditions such as stiffness conditons. In this paper, the joint constitutive law including the dilatant behaviour of a joint is numerically modelled using the edge-to-edge contact logic in distinct element method. Also, presented is the method to quantify the input parameters used in the joint law. The results from uniaxial compression and direct shear tests using the numeical model of the single joint were compared to the analytic results from them. The boundary effect on the behaviour of a joint is verified by comparing the results of direct shear test under constant stress boundary condition with those under constant stiffness boundary condition. The numerical model developed is applied to a complex jointed rock mass to examine its performance and to evaluate the effect of joint dilation on tunnel stability.

• 한국해안해양공학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2001

파랑으로 인해 발생되는 흐름은 연안에서 질량수송의 일련의 과정을 야기시키므로 연안유역의 관리에 파랑과 흐름의 상호작용에 대한 정확한 이해가 요구된다. 본 논문은 적응가능한 사면 구조 격자에 근간을 둔 파랑장과 흐름장을 혼합한 수치모델을 기술하였다. 사용한 모델은 쇄파, 천수, 굴절, 회절, 파랑과 흐름의 상호작용, 평균해면의 저하와 상승, 혼합 과정, 바닥 마찰 효과 그리고 해안선에 접한 운동 등을 해석할 수 있다. 주기와 수심으로 평균한 지배 방정식은 단계적으로 엇갈린 사면구조 격자에 적응 가능한 Adam-Bashforth 2차 유한 차분 기법으로 양해적으로 모델화 되었다. 본 모델로부터의 결과는 평면 해변에서 경사 입사파에 의해 발생된 연안류의 실험치와 타당한 일치를 보였다.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.215-231
• /
• 2011

As a brittle and heterogeneous material, concrete behaves differently under different stress conditions and its bulk strength is loading rate dependent. To a large extent, the varying behavioural properties of concrete can be explained by the mechanical failure processes at a mesoscopic level. The development of a computational mesoscale model in a general finite element environment, as presented in the preceding companion paper (Part 1), makes it possible to investigate into the underlying mechanisms governing the bulk-scale behaviour of concrete under a variety of loading conditions and to characterise the variation in quantitative terms. In this paper, we first present a series of parametric studies on the behaviour of concrete material under quasi-static compression and tension conditions. The loading-face friction effect, the possible influences of the non-homogeneity within the mortar and ITZ phases, and the effect of randomness of coarse aggregates are examined. The mesoscale model is then applied to analyze the dynamic behaviour of concrete under high rate loading conditions. The potential contribution of the mesoscopic heterogeneity towards the generally recognized rate enhancement of the material compressive strength is discussed.

• Steel and Composite Structures
• /
• 제11권1호
• /
• pp.39-58
• /
• 2011

The subject of the ongoing research work is to analyze the composite action of the structural elements of composite slabs with profiled steel decking by experimental and numerical studies. The mechanical and frictional interlocks result in a complex behaviour and failure under horizontal shear action. This is why the design characteristics can be determined only by standardized experiments. The aim of the current research is to develop a computational method which can predict the behaviour of embossed mechanical bond under shear actions, in order to derive the design characteristics of composite slabs with profiled steel decking. In the first phase of the research a novel experimental analysis is completed on an individual concrete encased embossment of steel strip under shear action. The experimental behaviour modes and failure mechanisms are determined. In parallel with the tests a finite element model is developed to follow the ultimate behaviour of this type of embossment, assuming that the phenomenon is governed by the failure of the steel part. The model is verified and applied to analyse the effect of embossment's parameters on the behaviour. In the extended investigation different friction coefficients, plate thicknesses, heights and the size effects are studied. On the basis of the results the tendencies of the ultimate behaviour and resistance by the studied embossment's characteristics are concluded.

• Structural Engineering and Mechanics
• /
• 제61권1호
• /
• pp.77-90
• /
• 2017

Glazed curtain walls are façade systems frequently chosen in modern architecture for mid and high-rise buildings. From recent earthquakes surveys it is observed the large occurrence of non-structural components failure, such as storefronts and curtain walls, which causes sensitive economic losses and represents an hazard for occupants and pedestrians safety. In the present study, the behavior of curtain wall stick systems under seismic actions has been investigated through experimental in-plane racking tests conducted at the laboratory of the Construction Technologies Institute (ITC) of the Italian National Research Council (CNR) on two full-scale aluminium/glass curtain wall test units. A finite element model has been calibrated according to experimental results in order to simulate the behavior of such components under seismic excitation. The numerical model investigates the influence of the interaction between glass panels and aluminium frame, the gasket friction and the stiffness degradation of aluminium-to-glass connections due to the high deformation level on the curtain walls behavior. This study aims to give a practical support to researchers and/or professionals who intend to numerically predict the lateral behavior of similar façade systems, so as to avoid or reduce the need of performing expensive experimental tests.