• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.127-134
• /
• 2020

상용흡착제 실로퓨트에 의한 Taxus chinensis 유래 주요 타르 성분인 아세나프텐의 흡착 특성을 조사하였다. 초기 아세나프텐 농도, 흡착 온도 및 시간에 따른 흡착 데이터를 Langmuir, Freundlich, Temkin 및 Dubinin-Radushkevich 등온흡착식에 적용한 결과, Langmuir 등온흡착식이 가장 적합하였다. 동역학적 흡착 데이터는 유사 이차 속도식에 가장 잘 따름을 알 수 있었다. 열역학적 파라미터로부터 흡착 공정이 적합하며 비자발적 발열이었다. 등량흡착열은 흡착량에 의존하지 않아 실로퓨트의 표면에너지가 균일함을 알 수 있었다.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.41-47
• /
• 1998

The purpose of this research is evaluation of adsorption capacity of the cast for TCE comparing with the yellow clay. Furthermore, the experimental data was fitted with the Langmuir and Freundlich isotherm and was found to be apllicable to the adsorption isotherm equation. The soil bed reactor used in this study was made of glass(10 cm in diameter, 100 cm in depth). The cast and yellow clay used as adsorbents were screened with 8-20 mesh mecanically. Results from Equilibrium test with adsorbents showed that the equibrium time of the cast and yellow clay was 9min independent of the amount of the adsorbents. The adsorption efficiencys of the cast and yellow clay for TCE was 66.3% and 56.2%, respectively. In the application of Freundlich isotherm, 1/n of the cast and yellow clay were 0.786 and 0.704, respectively. These results showed that the cast was more available than the yellow clay as TCE adsorbent. The best adsorption capacity was showed at 0% moisture content, 70 ppm inlet concentration and 25$^{\circ}$C temperature.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.307-314
• /
• 2005

In this work, a static volumetric method was experimentally implemented to measure the adsorption isotherm of hydrogen and methane by the activated carbon. The equilibrium data of stationary phase and mobile phase were correlated into the Langmuir, Freundlich, Langmuir-Freundlich, and Toth isotherms, respectively. In addition, the comparison between prediction and experimental data was made. By a nonlinear regression analysis, the experimental parameters in the equilibrium isotherms were estimated and compared. Then, the linear and quadratic equations for pressure and temperature to adsorption amounts were expressed. The adsorption amounts were increased with the pressure increase and the temperature decrease.

• 공업화학
• /
• 제9권5호
• /
• pp.661-666
• /
• 1998

고시리카제올라이트 (HSZ), 거대망상수지입자(MR) 및 입상활성탄(GAC)에 의한 수용액중의 12가지 아민유도체의 평형흡착 실험 데이터와 Freundlich, Langmuir, Toth, Redlich-Peterson 식의 인자들을 각각 구하였다. 아민류의 흡착특징에 있어서는 고시리카제올라이트는 unfavourable, 입상활성탄은 favourable로 비선형이나, 거대망상수지흡착제는 선형관계의 특성을 나타내며, 변수가 2개인 Freundlich 식과 3개인 Redlich-Peterson 흡착등온식에 잘 일치하였다. HSZ, MR, GAC에 의한 아민류의 흡착능은 방향족>1급아민>2급아민 순이었으며, Freundlich상수 k와 n의 곱인 (k n)값은 HSZ와 MR 및 GAC에서 아민류의 끓는 점 $T_B$, 몰부피 $V_m$, 그리고 해리상수 $pK_a$에 비례하여 증가하였다.

• 상하수도학회지
• /
• 제28권4호
• /
• pp.453-459
• /
• 2014

The excessive concentration of phosphorus in the river and reservoir is a deteriorating factor for the eutrophication. The converter slag was used to remove the phosphate from the synthetic wastewater. Influencing factors were studied to remove soluble orthophosphate with the different particle sizes through the batch and the column experiments by continuous flow. Freundlich and Langmuir adsorption isotherm constants were obtained from batch experiments with $PS_A$ and $PS_B$. Freundlich isotherm was fitted better than Langmuir isotherm. Regression coefficient of Freundlich isotherm was 0.95 for $PS_A$ and 0.92 for $PS_B$, respectively. The adsorption kinetics from the batch experiment were revealed that bigger size of convert slag, $PS_A$ can be applied for the higher than 3.5 mg/L of phosphate concentration. The pilot plant of continuous flow was applied in order to evaluate the pH variation, breakthrough points and breakthrough adsorption capacity of phosphate. The variation of pH was decreased through the experimental hours. The breakthrough time was 1,432 and 312 hours to 10 mg/L and 50 mg/L for the influent concentration, respectively. The breakthrough adsorption capacity was 3.54 g/kg for 10 mg/L, and 1.72 g/kg for 50 mg/L as influent phosphate concentration.

• 분석과학
• /
• 제13권4호
• /
• pp.433-439
• /
• 2000

무정형 알루미나를 흡착제로 사용하여 니켈(II) 이온의 흡착거동을 조사하였다. 흡착반응속도에 관하여 실험한 결과, 두 단계 흡착, 즉 한 시간 이내 빠르게 진행되는 흡착과 그 이후에는 느리게 진행되는 흡착으로 구분되었다. 흡착등은 실험에서는 Langmuir-Freundlich 흡착식을 만족하였으며 PH가 높을수록 최대흡착량이 증가함을 보였다. 이온강도의 변화에 따른 흡착량의 변화를 조사한 결과 어떤 뚜렷한 경향성을 보이지 않은 것으로 보아 니켈(II) 이온의 흡착은 정전기적 상호작용이라기 보다는 표면착물형성으로 이루어짐을 추정할 수 있었다. 일정한 이온강도에서 세 가지의 니켈(II) 이온 농도에서 pH를 변화시키면서 흡착량을 측정한 결과 니켈(II) 이온의 농도가 높을수록 흡착률은 감소했으며 흡착변곡점은 보다 높은 pH쪽으로 이동하였다.

• 대한화학회지
• /
• 제54권1호
• /
• pp.115-119
• /
• 2010

수용액에서 Neutral red5 (BR 5)의 흡착을 조사하였다. $250^{\circ}C$에서 2시간동안 소각한 제지 슬러지로부터 새로운 고형 흡착제를 제조하였다. 제조된 폐수로부터 RB5 염료를 제거하기 위해 배치 시스템으로 실험을 수행한 결과, 상온 pH 5조건에서 80분동안 최대 374.98 mg/g 의 흡착을 보였다. 높은 회귀계수(regression coefficient $R^2$)와 함께 The Freundlich isotherm이 실험값과 잘 부합하였다.

• 한국환경과학회지
• /
• 제2권4호
• /
• pp.357-365
• /
• 1993

This study was conducted for the efficient utilization of biomaterials such as starch residue, tangerine skin, and green tea residue, which are agricultral by-products discarded in Cheju Province annually, as adsorbents and biomaterials were examined for their removal ability of heavy metal ions in waste water by batch adsorption experiments. The removal efficiency of biomaterials for heavy metal ions was above 80-90% and almost similar to activated carbon and the adsorption ability of those treated with 포르말린 was improved in the green tea residue only for $Pb^{2+}$, $Cu^{2+}$, and $Zn^{2+}$. In the conditions of pH, the removal efficiency of heavy metal ions was high in the range of 5-7. In the solutions which heavy metal ions were mixed, the removal efficiency was similar at $Ag^+$, $Pb^{+2}$ and reduced to about 10% at the other ions, as compared with the solutions they were not mixed. Adsorption isotherm of biomaterials was generally obeyed to Freundlich formular than Langmuir formular and Freundlich constant, 1/n were obtained in the range of 0.1-0.5.

• 환경위생공학
• /
• 제14권4호
• /
• pp.1-8
• /
• 1999

This study was aimed ultimately to develop an adsorption process treating heavy metal wastewater by utilizing activated carbon using flyash. The affecting factors in adsorption process on heavy metal by flyash adhesion-activated carbon are s follows. Factors such as pH, and quality of activated carbon, and reaction time made batch adsorption isotherm described adsorption capacity was made use of the investigation to evaluate adsorptive possibility of heavy metal.As the results of this study, H ion has influence on adsorption of heavy metal if pH is low. As reaction time is transformed, factors such as optimum reaction time is taken into consideration an adsorptive process of heavy metal because an adsorption and a reduction process occur. Adsorption isotherm of adhesion-activated carbon was generally obeyed to Freundlich formular than Langmuir formular and Freundlich constant, l/n were obtained in the range of 0.1~0.5.

• 한국환경과학회지
• /
• 제11권4호
• /
• pp.333-338
• /
• 2002

In this work, the characterization of adsorption of Cu, Zn and Cd on granular activated carbon in water has been studied. The factors that affect adsorption in boundary between activated carbon and wastewater are concentration, temperature, contact time, pH and so on. As the result of this study, the maximum adsorption amount of Cu occurred near pH 7, while that of Zn and Cd was near pH 9.6 and 10, respectively. As contact time and temperature are transformed, such factors as optimum contact time and temperature are taken into consideration in an adsorptive process of heavy metal because an adsorption and a reducing process occur. In isotherm of Freundlich, 1/n values of Cu, Cd capacity were between 0.16 and 0.5.