• 대한화학회지
• /
• 제62권2호
• /
• pp.79-86
• /
• 2018

This study reported the adsorption of Cu(II) ions onto activated carbon prepared from Myristica Fragrans shell (MFS AC) over independent variables of contact time, activating chemical (NaOH) concentration, initial adsorbate concentration, initial pH of adsorbate solution and adsorption temperature. The MFS AC structure, morphology and total surface area were characterized by FTIR, SEM and BET techniques, respectively. The Cu(II) ions adsorption on the MFS AC (activated using 0.5 M NaOH) fitted best to Freundlich adsorption isotherm (FAI), and the FAI constant obtained was 0.845 L/g at $30^{\circ}C$ and pH 4.5. It followed the pseudo first order of adsorption kinetic (PFOAK) model, and the PFOAK based adsorption capacity was 107.65 mg/g. Thermodynamic study confirmed the Cu(II) ions adsorption should be exothermic and non-spontaneous process, physical adsorption should be taken place. The total surface area and pore volume based on BET analysis was $99.85m^2/g$ and 0.086 cc/g, respectively.

• 한국환경과학회지
• /
• 제12권10호
• /
• pp.1061-1069
• /
• 2003

The adsorption behaviors of strontium and cesium ions on fly ash, natural zeolites, and zeolites synthesized from fly ash were investigated. The zeolites synthesized from fly ash had greater adsorption capabilities for strontium and cesium ions than the original fly ash and natural zeolites. The maximum adsorption capacity of synthetic zeolite for strontium and cesium ions was 100 and 154 mg/g, respectively, It was found that the Freundlich isotherm model could fit the adsorption isotherm. The distribution coefficients (K$\_$d/) for strontium and cesium ions were also calculated from the adsorption isotherm data, The distribution coefficients decreased with increasing equilibrium concentration of strontium and cesium ions in solution. By studying the removal of cesium and strontium ions in the presence of calcium, magnesium, sodium, potassium, sulfate, nitrate, nitrite, and EDTA (in the range of 0.01 - 5 mM) it was found that these coexistence ions competed for the same adsorption sites with strontium and cesium ions.

• 콘크리트학회논문집
• /
• 제29권4호
• /
• pp.389-397
• /
• 2017

시멘트내 $C_3A$상과 $C_4AF$상은 염소이온과 반응하여 프리델염을 생성한다. 프리델염은 구조체에서 염소를 포함하기 때문에 염소이온의 흡착에 매우 중요하다. 외부에서 염소이온이 침투하면, 칼슘 알루미네이트 수화물은 염소이온을 고정하므로, $C_3A$상과 $C_4AF$상 및 AFm상의 염소 흡착 거동을 고찰하는 것은 고정화 현상을 이해하는데 매우 중요하다. 한편, 흡착 등온은 시멘트와 프리델염의 상호관계에서 정량적인 지식을 제공할 뿐만 아니라 그 상호관계의 특성을 이해하는데 매우 중요하다. 본 연구의 목적은 $C_3A$상, $C_4AF$상 및 AFm상의 염소이온 흡착 거동을 고찰하는데 있다. $C_3A$상과 $C_4AF$상의 흡착등온은 이론적 화학당량보다 다소 낮았으며 Langmuir 흡착등온식으로 표현할 수 있었다. AFm상의 흡착등온은 이론적 화학당량보다 매우 낮았으며, Freundlich 흡착등온식으로 표현하였다. 또한 흡착등온 모델에서 온도의 영향 매개변수를 실험범주내에서 온도의 함수로 제안하였다.

• Advances in environmental research
• /
• 제4권2호
• /
• pp.119-133
• /
• 2015

Water pollution means that the physical, chemical and biological properties of water are changing. In this study, adsorption was chosen as the treatment method because it is an eco-friendly and low cost approach. Magnetite is a magnetic material that can synthesize chemical precipitation. Magnetite was used for the removal of copper in artificial water samples. For this purpose, metal removal from water dependent on the pH, initial concentration of metal, amount of adsorbent and effect of sorption time were investigated. Magnetite was characterized using XRD, SEM and particle size distribution. The copper ions were determined by atomic absorption spectrometry. The adsorption of copper on the magnetite was studied in a batch process, with different aqueous solutions of Cu (II) at concentrations ranging from 10 to $50mg\;l^{-1}$. Optimum conditions for using magnetite were found to be concentration of $10mg\;L^{-1}$, pH: 4.5, contact time: 40 min. Optimum adsorbent was found to be 0.3 gr. Furthermore, adsorption isotherm data were analyzed using the Langmuir and Freundlich equations. The adsorption data fitted well with the Freundlich ($r^2=0.9701$) and Langmuir isotherm ($r^2=0.9711$) equations. Kinetic and equilibrium aspects of the adsorption process were studied. The time-dependent Cu (II) adsorption data were described well by a pseudo-second-order kinetic model.

• Advances in environmental research
• /
• 제4권3호
• /
• pp.197-210
• /
• 2015

Hexavalent chromium [Cr (VI)] adsorption on lateritic soil and lateritic soil blended with black cotton (BC) soil, marine clay and bentonite clay were studied in the laboratory using batch adsorption techniques. In the present investigation the natural laterite soil was blended with 10%, 20% and 30% BC soil, marine clay and bentonite clay separately. The interactions on test soils have been studied with respect to the linear, Freundlich and Langmuir isotherms. The linear isotherm parameter, Freundlich and Langmuir isotherm parameters were determined from the batch adsorption tests. The adsorption of Cr (VI) on natural laterite soil and blended laterite soil was determined using double beam spectrophotometer. The distribution coefficients obtained were 1.251, 1.359 and 2.622 L/kg for lateritic soil blended with 10%, 20% and 30% BC soil; 5.396, 12.973 and 48.641 L/kg for lateritic soil blended with marine clay and 5.093, 8.148 and 12.179 L/kg for lateritic soil blended with bentonite clay respectively. The experimental data fitted well to the Langmuir model as observed from the higher value of correlation coefficient. Soil pH and iron content in soil(s) has greater influence on Cr (VI) adsorption. From the study it is concluded that laterite soil can be blended with clayey soils for removing Cr (VI) by adsorption.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.145-149
• /
• 2000

The purpose of this study was to determine whether Vermi Cast could be used effectively to remove $SO_2$ from flue gas, and then to investigate optimum adsorption conditions. The Vermi Cast used as adsorbent was mechanically screened with 8~20 mesh sieve. The adsorption data for $SO_2$ were regressed using the Freundlich isotherm. The fit was generally satisfactory ($R^2$=0.945~0.982). With the temperature changes from 2$0^{\circ}C$ to 4$0^{\circ}C$, the constant k in Freundlich isotherm qe= $kCe^{1/n}$, decreased from 1.409 at 2$0^{\circ}C$to 0.297 at 4$0^{\circ}C$, and the exponent 1/n were decreased from 0.343 to 0.134. With the bed depth changes from 10cm to 30cm, the adsorption capacity expressed as mmol of $SO_2$ adsorbed per g of Vermi Cast increased from 0.247 to 0.381. Moisture content is an important parameter in the $SO_2$ adsorbed were observed over 0.3mmol $SO_2$ /g Vermi Cast. The best adsorption capacity was 0.487mmol $SO_2$ /g Vermi Cast, and it was obtained with moisture content 37%, temperature 2$0^{\circ}C$. From the above results, ti might be concluded that Vermi Cast is effectively as a good adsorbent to remove $SO_2$ from flue gas.

• 상하수도학회지
• /
• 제29권6호
• /
• pp.609-615
• /
• 2015

This study was carried out for characterization of MIO synthesized in our laboratory by co-precipitation method and applied isotherm and kinetic models for adsorption properties. XRD analysis were conducted to find crystal structure of synthesized MIO. Further SEM and XPS analysis was performed before and after phosphate adsorption, and BET analysis for surface characterization. Phosphate stock solution was prepared by KH2PO4 for characterization of phosphate adsorption, and batch experiment was conducted using 50 ml conical tube. Langmuir and Freundlich models were applied based on adsorption equilibrium test of MIO by initial phosphate solution. Pseudo first order and pseudo second order models were applied for interpretation of kinetic model by temperature. Surface area and pore size of MIO were found $89.6m^2/g$ and 16 nm respectively. And, the determination coefficient ($R^2$) value of Langmuir model was 0.9779, which was comparatively higher than that of Freundlich isotherm model 0.9340.

• 대한지하수환경학회지
• /
• 제4권2호
• /
• pp.78-84
• /
• 1997

수도권 매립지 지반의 침출수에 대한 흡착성 분석을 위한 벳치실험과 컬럼시험을 수행하였다. 벳치실험에서는 제 1공구와 제 3공구 각각에서 채취한 지반토의 무기물, 중금속에 대한 흡착능과 흡착등온식을 알아보았으며 컬럼실험에서는 염소, 요오드, 칼륨, 납, 카드뮴을 사용하여 분산성과 오염 저감능력을 알아보았다. 시험결과 토양 시료 모두 Freundlich 등온식에 잘 따르는 것을 확인할 수 있었으며, 해성점토시료 모두 중금속과 무기물인 칼륨에 대한 흡착력이 큰 것으로 확인되었다. 시료 채취 지점의 지질변화에 따른 실험된 성분에 대한 흡착성의 차이는 거의 없는 것으로 나타났다.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.943-950
• /
• 2009

Cadmium (Cd) adsorption onto the activated carbon containing hydroxyapatite (HAP) was investigated in batch experiments and response surface methodology (RSM) using the Box-Behnken methods were applied to the experimental results. Cd adsorption with different HAP mass ratio of from 10% to 30%. With more HAP, Cd was more adsorbed. These results suggest that the higher HAP mass causes an increase of the ion exchange potential of the HAP sorbent. Equilibrium experimental results from Cd adsorption was fitted to Langmuir and Freundlich isotherm models. Cd adsorption on HAP sorbent were found to follow the Freundlich isotherm model well in the initial adsorbate concentration range. Also, Cd adsorption was a function of the HAP mass ratio ($x_1$), initial Cd concentration ($x_2$), and initial pH ($x_3$) from the application of the RSM. Statistical results showed the order of significance of the independent variables to be initial Cd concentration > HAP mass ratio > initial pH.

• 생명과학회지
• /
• 제8권2호
• /
• pp.208-215
• /
• 1998

제주도 근해에서 다량 채취되고 있는 해양갈조류인 톳의 살아있지 않은 건조한 생물질을 Ca-alginate법(Ca-ALG), Ba-alginate법(Ba-ALG), polyethylene glycol법(PEG), $\kappa$-carrageenan법(CARR) 등으로 고정화시켜 고정화방법에 따른 Cu의 흡착기능을 검토하였다. 생물질의 첨가량이 증가함에 따라서 Cu의 제거율은 증가하였으나 흡착량은 감소하였다. 그러나 초기농도가 증가함에 따라서는 cu의 흡착량이 증가하였다. 고정화법에 따른 Cu의 흡착량은 Ca-ALG>Ba-ALG>PEG>CARR순으로 감소하엿다. 고정화된 생물질에 으한 Cu의 흡착은 Freundlich 흡착 등온식 보다는 Langmuir 흡착 등온식을 잘 따름을 알 수 있었다.