• 대한기계학회논문집A
• /
• 제35권5호
• /
• pp.533-541
• /
• 2011

본 연구에서는 공압형 인공근육으로 이루어진 회전관절의 동적 특성을 파악하기 위해서 두 개의 공압형 인공근육으로 이루어진 상극구동 시스템의 주파수 응답특성실험을 수행하였다. 인공근육의 작동범위에서 수행한 주파수 응답결과에 최적으로 근사할 수 있는 선형모델을 추정하고 이를 이용하여 회전관절의 움직임을 정밀하게 제어할 수 있는 모델에 기초한 제어법칙을 제시하였다. 사각파, 정현파 기준궤적에 대한 회전관절의 추종실험을 수행한 결과 선형 추정모델에 의한 보상효과와 피드벡 이득에 의한 추종오차 제거효과를 통해서 우수한 궤적 추정성능을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1455-1458
• /
• 2002

In this paper, we propose a modified CP-AFC(Cross-Product Automatic Frequency Control) algorithm to enhance coherent signal detection for WCDMA reverse link receiver. We introduce a moving average filter at the FDD(Frequency Difference Detector) input to increase the number of cross-products, since pilot symbol in WCDMA is not transmitted continuously. We also add normalization algorithm to overcome the conventional CP-FDD's sensitivity to the variance of input signal amplitude and to increase the linear range of S- curve. For rapid frequency acquisition and tracking, we adopt a multi-stage tracking mode. We applied the proposed algorithm in the implementation of WCDMA base station modem successfully.

• 동력기계공학회지
• /
• 제7권3호
• /
• pp.40-47
• /
• 2003

In this study, position and force simultaneous trajectory tracking control apparatus with pneumatic cylinder driving system is proposed. The pneumatic cylinder driving system that consists of two pneumatic cylinders constrained in series and two proportional flow control valves offers a considerable advantage as to non-interaction of the actuators because of the low stiffness of the pneumatic actuators. The controller applied to the driving system is composed of a non-interaction controller to compensate for interaction of two cylinders and a disturbance observer to reduce the effect of model discrepancy of the driving system in the low frequency range that cannot be suppressed by the non-interaction controller. The experimental results with the proposed control apparatus show that the interacting effects of two cylinders are eliminated remarkably and the proposed control apparatus tracks the given position and force trajectory accurately.

• 전자공학회논문지B
• /
• 제30B권4호
• /
• pp.67-75
• /
• 1993

The Fourier series are employed to approximate the input/output(I/O) characteristics of a dynamic system and, based on the approximation, a new learing control algorithm is proposed in order to find iteratively the control input for tracking a desired trajectory. The use of the Fourier approximation of I/O renders at least a couple of useful consequences: the frequency characteristics of the system can be used in the controller design and the reconstruction of the system states is not required. The convergence condition of the proposed algorithm is provided and the existence and uniqueness of the desired control input is discussed. The effectiveness of the proposed algorithm is illustrated by computer simulation for a robot trajectory tracking. It is shown that, by adding feedback term in learning control algorithm, robustness and convergence speed can be improved.

• Journal of Power Electronics
• /
• 제2권1호
• /
• pp.46-54
• /
• 2002

In this paper a neural network controller for achieving maximum power tracking as well as output voltage regulation, for a wind energy conversion system (WECS) employing a permanent magnet synchronous generator is proposed. The permanent magnet generator (PMG) supplies a dc load via a bridge rectifier and two buck-boost converters. Adjusting the switching frequency of the first buck-boost converter achieves maximum power tracking. Adjusting the switching frequency of the second buck-boost converter allows output voltage regulation. The on-time of the switching devices of the two converters are supplied by the developed neural network (NN). The effect of sudden changes in wind speed and/ or in reference voltage on the performance of the NN controller are explored. Simulation results showed the possibility of achieving maximum power tracking and output voltage regulation simulation with the developed neural network controllers. The results proved also the fast response and robustness of the proposed control system.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.597-607
• /
• 2014

This paper proposes active power control and frequency support control schemes of wind turbine generation system by using modified Maximum Power Point Tracking(MPPT) of Permanent Magnet Synchronous Generator(PMSG). Most wind turbine generation system is completely decoupled from the power system and power output control with pitch control. According to the frequency deviation, however, MPPT control can not contribute to the frequency change of the power system due to its active power output control. For solving this, the de-loaded(DL) control scheme is constructed for the frequency support control, which is based on applying the active power output control in the rotor speed control of PMSG. The rotor speed by used in the proposed DL control scheme is increased more than the optimal rotor speed of MPPT, and then this speed improvement increases the saved kinetic energy(KE). In order to show the effectiveness of the proposed control scheme, the case studies have been performed using the PSCAD/EMTDC. The results show that the proposed active power output control scheme(DL control and KE discharge control) works properly and the frequency response ability of the power system can be also improved with the frequency support of wind farm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.63-66
• /
• 2002

This paper has been studied the parallel resonant inverter which controlling the constant power and tracking the load resonant frequency with PLL is possible, in order to minimize switching losses. The current-fed full-bridge type parallel resonant inverter of an induction heating system was composed of IGBT in switching device. For regulating the output power of an induction heating system, the Fuzzy controller is used. The Fuzzy controller makes the control signal for a stable power regulating control and when reference is changed, it is superior to adaptability. It has been evaluated a stable behavior for a noise with switching and a load disturbance.

• 대한전자공학회논문지TC
• /
• 제39권8호
• /
• pp.14-25
• /
• 2002

본 논문에서는 제 3 세대 이동 통신인 WCDMA 기지국 모뎀의 실제 구현에 적합하도록 변형된 AFC(Automatic Frequency Control) 루프를 제안한다. 제안된 AFC 루프에는 구현상의 복잡도 감소를 위하여 기존의 CP-FDD(Cross Product Frequency Difference Detector) 알고리즘을 변형한 Normalized CP-FDD 알고리즘을 적용하였다. 제안된 Normalized CP-FDD는 입력 신호 진폭 변화에 민감한 기존 CP-FDD 출력 특성을 보완하며, FDD의 출력(S-curve)의 선형화 구간을 증가시킴으로써 안정적인 주파수 오차에 대한 추정을 가능하게 한다. WCDMA에서는 IS-95 시스템과 다르게 파일롯 심볼이 연속적으로 전송되지 않으므로, FDD 입력단에 이동 평균 필터(Moving Average Filter)를 도입하여 교차곱(Cross-product)의 수를 증가시킴으로써 잡음의 영향을 감소시키고 주파수 오차에 대한 추적 시간 성능과 안정성을 향상시켰다. 또한 다단 추적 모드를 적용함으로써 수신 신호의 주파수 오차의 크기에 대한 능동적인 보상이 가능하도록 하였으며, 루프 필터의 출력을 이용한 ROM table 도약 구조의 NCO(Numerical Controled Oscillator)를 적용하여 주파수 오차를 보상하였다. 본 논문에서 제안한 알고리즘은 WCDMA 기지국 모뎀 구현에서 성공적으로 적용되었다.

• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.66-74
• /
• 2012

The virtual target signal generator was developed to verify the shipborne tracking radar performance. It was used to DRFM(Digital RF Memory) method to generate the virtual moving targets. The target signal includes Doppler shift and RCS according to the target motion. And the signal generator can make jamming signal and clutter to test shipborne radar performance at real environmental condition. This paper described the functional diagram and the hardware configuration items to meet the test requirements for the tracking radar. And it showed the critical design points for the sub-systems. The signal generator which was developed in this paper shared the operational information of the radar with the radar command and control part. To test the frequency agility of the radar, it had the local oscillator which could do high speed frequency switching according to radar information. By communicating between the signal generator and the radar command and control part, the local oscillator of signal generator could be controlled every pulse. It reduced the instantaneous bandwidth of signal generator and minimized the spurious. So it lowered the probability of generating wrong targets.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.256-263
• /
• 2013

The saturation of the actuator impairs the response performance of the near space interceptor control system. A control system based on the properties of linear tracking system is designed for this problem. The properties are that the maximum value of the pseudo-Lyapunov function of the linear tracking control system do not present at the initial state but at the steady state, based on which the bounded stability problem is converted into linear tracking problem. The pseudo-Lyapunov function of the linear tracking system contain the input variables; the amplitude and frequency of the input variables affect the stability of the nonlinear control system. Designate expected closed-loop poles area for different input commands and obtain a controller which is function of input variables. The coupling between variables and linear matrices make the control system design problem non-convex. The non-convex problem is converted into a convex LMI according to the Shur complement lemma and iterative algorithm. Finally the simulation shows that the designed optimal control system is quick and accurate; the rationality of the presented design techniques is validated.