• 한국통신학회논문지
• /
• 제25권5B호
• /
• pp.974-984
• /
• 2000

전압 강하 변환기의 구동 회로를 제안하였다. 구동 회로의 load regulation 특성을 개선하기 위하여 적응 바이어스(adaptive biasing) 개념을 제안하였고 이 개념을 도입한 NMOS 구동 회로를 설계하였다. 적응 바이어스 전류 구동 개념이 적용된 NMOS 구동 회로는 구동단에서의 밀러(Miller) 효과가 없으므로 위상 여유가 크고 안정된 주파수 특성을 보여주고 있다. NMOS 구동단은 같은 구동 전류를 흘려줄 경우 PMOS 구동단에 비해 훨씬 적은 트랜지스터 크기 비로 설계 제작이 가능하므로 칩 면적을 크게 줄일 수 있으며 PMOS 구동단에서의 같은 보상 커패시터나 보상 추로 회로가 없다. 제안된 회로는 0.8 $\mu\textrm{m}$ CMOS 공정 기술을 이용하여 구현되었으며 설계가 간단하고, 대기 전력(quiescent power)이 60 ㎼로 측정되었다. 전체 크기는 150 $\mu\textrm{m}$$\times$ 360 $\mu\textrm{m}$이고 100$\mu\textrm{A}$부터 50 ㎃ 까지의 구동 전류 변화 조건하에서 5.6 ㎷의 load regulation 값을 얻었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.677-687
• /
• 2018

This paper presents a novel power decoupling control scheme with the bidirectional buck-boost converter for primary-side regulation photovoltaic (PV) micro-inverter. With the proposed power decoupling control scheme, small-capacitance film capacitors are used to overcome the life-span and reliability limitations of the large-capacitance electrolytic capacitors. Then, an improved flyback PV inverter is employed in continuous conduction mode with primary-side regulation for the PV power conditioning. The proposed power-decoupling controller shares the reference for primary side current regulation of the flyback PV inverter. The decoupling controller shapes the input current of the bidirectional buck-boost converter. The shared reference eliminates the phase-delay between the input current to the bidirectional buck-boost converter and the double frequency current at the PV primary current. The elimination of the phase-delay in dynamic response enhances the ripple rejection capability of the power decoupling buck-boost converter even with small film capacitor. With proposed power decoupling control scheme, the additional advantage of the primary-side regulation of flyback PV inverter is that there is no need to have an extra current sensor for obtaining the ripplecurrent reference of the decoupling current-controller of the power-decoupling buck-boost converter. Therefore, the proposed power decoupling control scheme is cost-effective as well as the size benefit. A new transient analysis is carried out which includes the source voltage dynamics instead of considering the source voltage as a pure voltage source. For verification of the proposed control scheme, simulation and experimental results are presented.

• 한국병원경영학회지
• /
• 제16권3호
• /
• pp.92-114
• /
• 2011

The study has its purpose on providing basic resource to enforce the capability of the middle managers by examining the level of performance and the level of awareness about the capabilities of the managers and by understanding the significance of the difference and the reasons for the differences. The source of the study was 195 survey questionnaires that were carried out to the managers of the 9 general hospitals and the method of the analysis was the frequency analysis, analysis of the credibility, matching to sample T-test, independent sample T-test, dispersion analysis, correlation analysis, and multiple linear regression analysis using accumulated variables. The followings are the main result of the study. First, the difference between the level of awareness about the capabilities and the level of performance of the mediator managers in general hospitals had high capability in change management. The following orders were: competence in achievement and behavior, competence in management, competence in recognition, competence in influence, competence in individual effectiveness, and competence in personal relationship service. Second, as the result of the relation analysis in order to understand the correlation between awareness and performance of the mediator managers, everything had significant positive correlation. In the study about the level of importance, the cognitive capability and the management capability had the highest correlation with the correlation number of 0.88. In the study about the level of performance, the cognitive capability, individual capability, and the management capability had the highest correlation with the correlation variable number of 0.79. Third, as the result of studying the reason for the difference between the level of the awareness capability and the level of the performance, lack of the support recognition compensation in the organization level, inappropriate work environment, limit in the regulation were found as the highest reason in the order. As the result of the study, it was concluded that the creation of the efficient capability estimation model and the securement of the system that estimate the capability of the managers should be carried out in order to enforce the capability of the mediator managers in general hospitals.

• 대한전자공학회논문지SD
• /
• 제37권1호
• /
• pp.19-28
• /
• 2000

고장에 대한 강인성, 높은 출력 전류 특성 및 모듈화의 용이성 때문에 병렬 인버터 시스템은 그활용도가 점차 높아지고 있다. 이러한 병렬 인버터 시스템에서 전체 시스템 전력균형 제어는 주로 주파수 드롭과 전압 드룹 제어 또는 유효전력 과 무효전력 제어를 통하여 이루어지고 있다. 그러나 이러한 제어방법들은 시스템 변수 변동 및 부하변동에 따라 늦은제어 응답특성을 가지는 단점을 가지고 있다. 이러한 단점을 해결하기위해, 본논문에서는 병렬 인버터 시스템의 각모듈 출력전력을 균등화 시키는 새로운 제어기를 제안하였다. 제안한 제어기는 하드웨어 구현의 용이성, 피크전류 차단 기능들의 특성을 가진다. 또한 본논문에서는 제안한 제어기의 설계 절차를 기술하였으며, 여러 부하조건 및 시스템 파라미터 변동조건에 따라 순시전력균형제어기 동작 특성의 효용성을 컴퓨터 시뮬레이션 및 실험을 통하여 확인 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.352-355
• /
• 2006

A new PWM-controlled quasi-resonant converter for high efficiency PDP sustaining power module is proposed in this paper. The load regulation of the proposed converter can be achieved by controlling the ripple of the resonant voltage across the resonant capacitor with hi-directional auxiliary circuit, while the main switches are operating at the fixed duty ratio and fixed switching frequency. Hence, the waveform of currents can be expected to be optimized on the conduction loss. Furthermore, the proposed converter shows the good ZVS capability, simple control circuits, no high voltage ringing problem of rectifier diodes, no DC offset of the magnetizing current and low voltage stress of power switches. In this paper, operational principles, analysis and design considerations are presented. Experimental results demonstrate that the output voltage can be controlled well by the auxiliary circuit as PWM method.

• Journal of Power Electronics
• /
• 제7권1호
• /
• pp.28-37
• /
• 2007

A new PWM-controlled quasi-resonant converter for a high efficiency PDP sustaining power module is proposed in this paper. The load regulation of the proposed converter can be achieved by controlling the ripple of the resonant voltage across the resonant capacitor with a bi-directional auxiliary circuit, while the main switches are operating at a fixed duty ratio and fixed switching frequency. Hence, the waveforms of the currents can be expected to be optimized from the view-point of conduction loss. Furthermore, the proposed converter has good ZVS capability, simple control circuits, no high voltage ringing problem of rectifier diodes, no DC offset of the magnetizing current and low voltage stresses of power switches. In this paper, operational principles, features of the proposed converter, and analysis and design considerations are presented. Experimental results demonstrate that the output voltage can be controlled well by the auxiliary circuit using the PWM method.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.543-550
• /
• 2003

본 논문에서는 2대의 다이오드 정류기에 부스트 컨버터를 이용하여 전류의 파형을 능동적으로 만들어 정현파의 입력전류를 얻는 새로운 방식의 고조파 저감방식을 제안한다. 제안한 방식으로 고역률의 전원 품질을 얻을 수 있으며 입력측의 변동에 대한 출력전압의 조정도 가능하다. 또한 저감된 용량을 갖는 3상 오토트랜스포머의 사용으로 기존의 $\Delta$-Y 변압기에 비해 KVA정격이 75% 절감되며 상간변압기도 필요 없다. 본 방식을 소형화와 고품질의 전원이 요구되는 통신용 정류기등에 적용하면 효과적이다. 제안한 방식의 동작원리, 제어 및 설계방법을 기술하고 1.5KW급 시작품으로부터의 실험결과를 제시한다.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.102-108
• /
• 2017

Proper design guides are proposed for a practical dual-active bridge (DAB) converter based on the mathematical model on the steady state. The DAB converter is popular in bidirectional application due to its zero-voltage capability and easy bidirectional operation for seamless control, high efficiency, and performance. Some design considerations are taken to overcome the limitation of the DAB converter. The practical design methodology of power stage is discussed to minimize the conduction and switching losses of the DAB converter. Small-signal model and frequency response are derived and analyzed based on the generalized average method, which considers equivalent series resistance, to improve the dynamics, stability, and reliability with voltage regulation of the practical DAB converter. The design of closed-loop control is discussed by the derived small-signal model to obtain the pertinent gain and phase margin in steady-state operation. Experimental results of a 3.3 kW prototype of DAB converter demonstrate the validity and effectiveness of the proposed methods.

• 한국응급구조학회지
• /
• 제15권3호
• /
• pp.31-44
• /
• 2011

Purpose : The purpose of emergency medical services(EMS) is to save human lives and assure the completeness of the body in emergency situations. Those who have been qualified on medical practice to perform such treatment as there is the risk of human life and possibility of major physical and mental injuries that could result from the urgency of time and invasiveness inflicted upon the body. In the emergency medical activities, 119 emergency medical technicians mainly perform the task but they are not able to perform such task independently and they are mandatory to receive medical direction. The purpose of this study is to examine the recognition and request for medical direction by 119 emergency medical technicians in order to provide basic information on the development of medical direction program suitable to the characteristics of EMS as well as for the studies on EMS for the sake of efficient operation of pre-hospital EMS. Method : Questionnaire via e-mail was conducted during July 1-31, 2010 for 675 participants who are emergency medical technicians, nurses and other emergency crews in Gyeongbuk. The effective 171 responses were used for the final analysis. In regards to the emergency medical technicians' scope of responsibilities defined in Attached Form 14, Enforcement regulations of EMS, t-test analysis was conducted by using the means and standard deviation of the level of request for medical direction on the scope of responsibilities of Level 1 & Level 2 emergency medical technicians as the scale of medical direction request. The general characteristics, experience result, the reason for necessity, emergency medical technicians & medical director request level, medical direction method, the place of work of the medical director, feedback content and improvement plan request level were analyzed through frequency and percentage. The level of experience in medical direction and necessity were analyzed through ${\chi}^2$ test. Results : In regards to the medical direction experience per qualification, the experience was the highest with 53.3% for Level 1 emergency medical technicians and 80.3% responded that experience was helpful. As for the recognition on the necessity of medical direction, 71.3% responded as "necessary" and it turned out to be the highest of 76.9% in nurses. As for the reason for responding "necessary", the reason for reducing the risk and side-effects from EMS for patients was the largest(75.4%), and the reason of EMS delay due to the request of medical direction was the highest(71.4%) for the reason for responding "not necessary". In regards to the request level of the task scope of emergency medical technicians, injection of certain amount of solution during a state of shock was the highest($3.10{\pm}.96$) for Level 1 emergency rescuers, and the endotracheal intubation was the highest($3.12{\pm}1.03$) for nurses, and the sublingual administration of nitroglycerine(NTG) during chest pain was the highest($2.62{\pm}1.02$) for Level 2 emergency medical technicians, and regulation of heartbeat using AED was the highest($2.76{\pm}.99$) for other emergency crews. For the revitalization of medical direction, the improvement in the capability of EMS(78.9%) was requested from emergency crew, and the ability to evaluate the medical state of patient was the highest(80.1%) in the level of request for medical director. The prehospital and direct medical direction was the highest(60.8%) for medical direction method, and the emergency medical facility was the highest(52.0%) for the placement of medical director, and the evaluation of appropriateness of EMS was the highest(66.1%) for the feedback content, and the reinforcement of emergency crew(emergency medical technicians) personnel was the highest(69.0%) for the improvement plan. Conclusion : The medical direction is an important policy in the prehospital EMS activity because 119 emergency medical technicians agreed the necessity of medical direction and over 80% of those who experienced medical direction said it was helpful. In addition, the simulation training program using algorithm and case study through feedback are necessary in order to enhance the technical capability of ambulance teams on the item of professional EMS with high level of request in the task scope of emergency medical technicians, and recognition of medical direction is the essence of the EMS field. In regards to revitalizing medical direction, the improvement of the task performance capability of 119 emergency medical technicians and medical directors, reinforcement of emergency medical activity personnel, assurance of trust between emergency medical technicians and the emergency physician, and search for professional operation plan of medical direction center are needed to expand the direct medical direction method for possible treatment beforehand through the participation by medical director even at the step in which emergency situation report is received.

• 한국심리학회지 : 코칭
• /
• 제5권1호
• /
• pp.33-65
• /
• 2021

본 연구는 대학생이 인식하는 학생성공의 개념을 조사하기 위한 탐색적 연구이다. 학생들의 자유로운 생각을 듣기위해 온라인 설문지를 활용해 개방형 설문을 진행하고 99명의 응답을 분석하였다. 응답결과는 CQR-M(Consensual Qualitative Research-Modified)을 사용하여 분석하였다. 분석결과 '학생성공의 의미', '학생성공을 위한 대학 환경 요인', '학생성공에 필요한 심리적 요인' 등 3개의 영역에서 25개 범주가 도출되었다. 첫 번째 영역인 대학생이 인식하는 '학생성공의 의미'에서는 '학업성취·취업 역량 증진·다양한 경험 쌓기·만족스러운 취업·원하는 진로 설정·관계형성 능력 증진·나만의 목표 설정과 달성·자기 개발·만족스러운 대학생활'의 9개의 범주가 도출되었다. 두 번째 영역인 '학생성공을 위한 대학 환경 요인'에서는 '진로개발 지원·직무역량 향상 시스템·대학생활 참여지원·인적 네트워크 형성 기회·학습역량 증진 시스템·경제적 지원 확대·학생 편의를 위한 환경'으로 7개 범주가 도출되었다. 세 번째 영역인 '학생성공에 필요한 심리적 요인'에서는 '학습능력·자기효능감·대인관계 유능성·자기인식 및 개선·직무역량·자기조절 능력·풍부한 경험·진로인식·자존감'의 9개의 범주가 도출되었다. 각 영역별 빈도와 결과를 분석하여 제시하고, 연구의 의의와 제한점을 논의하였으며, 후속연구에 대한 제언을 하였다.