• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.9
• /
• pp.355-363
• /
• 1984

An ideal and an approximate eauivalent circuits of a face-mounted PZT piezoelectric transformer were introduced from the equivalent circuit taking into account the mechanical loss of a PZT piezoelectric disk vibrator. And several expressions for the resonant frequencies and for the voltage ratios were derived from the approximate circuit of the transformer. From the experiments on the vltage ratios regarding the frequency variation without load and on the load variation at resonant frequency, it was found that the voltage ratio increased with the increase of load resistance and decreased sharply with the slight deviation from the resonant frequency, and that no-load voltage ratio at the resonant frequency was proportional to the product of the mechanical quality factor and the square of the electromechanical coupling factor of the vibrator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.150-150
• /
• 2000

We as modal parameter estimation technique by developing a residual based system reconstruction and using the system matrix coordinate transformation. The modal parameters can be estimated from and residues of the system transfer functions expressed in modal coordinate basis, derived from the state space system matrices. However, for modal parameter estimation of multivariable and order structural systems over broad frequency bands, this non-iterative algorithm gives high accuracy in the natural fre- and damping ratios. From vibration tests on cross-ply and angle-ply composite laminates, the natural frequencies and damping ratios on be estimated using tile coordinates of the structural system reconstructed fro the experimental frequency response. These results are compared with those of finite element analysis and single-degree-of-freedom curve-fitting.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.527-527
• /
• 2000

Wean modal parameter estiimation technique by developing a residual based system reconstruction and using the system matrix coordinate transformation. The modal parameters can be estimated from and residues of the system transfer functions expressed in modal coordinate basis, derived from the state space system matrices. However, for modal parameter estimation of mllltivariable and order structural systems over broad frequency bands, this non-iterative algorithm gives high accuracy in the natural fre and damping ratios. From vibration tests on cross-ply and angle-ply composite laminates, the natural frequencies and damping ratios can be estimated using the coordinates of the structural system reconstructed from the experimental frequency response. These results are compared with those of finite element analysis and single-degree-of-freedom curve-fitting..

• Journal of Families and Better Life
• /
• v.16 no.2
• /
• pp.83-96
• /
• 1998

The purpose of this study was to investigate the level of assets and liabilities of farm households and to evaluate the financial status of rural middle-aged and old-aged household using financial ratios. For these purposes an empirical survey data was gathered from rural middle-aged and old-aged households in 8 provinces using structured questionnaires. 877 households data were used in final analysis. The statistical methods used for data analysis are frequency percentile mean The statistical methods used for data analysis are frequency percentile mean median standard deviation $\chi$2 and t-test using SPSS/PC WIN program. Among financial ratios 64.7% of total households could meet the guideline of consumption to income ratio 5.9% of total households could meet the appropriate level of short-term and long-term liquidity. In the case of debt burden ration 82% of total households could meet the guideline. And 28.5% of total households could meet the guideline of capital stock ratio .

• Advances in nano research
• /
• v.11 no.6
• /
• pp.641-648
• /
• 2021

In this article, the dynamic parameters (frequencies, mode shapes, damping ratios) of the scaled concrete structure and the dynamic parameters (frequencies, mode shapes, damping ratios) of the entire outer surface of titanium dioxide, 80 micron in thickness are compared using operational modal analysis method. Ambient excitation was provided from micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition (EFDD) was used for the output only modal identification. From this study, a good correlation between mode shapes was found. Titanium dioxide applied to the entire outer surface of the scaled concrete structure has an average of 11.78% difference in frequency values and 10.15% in damping ratios, proving that nanomaterials can be used to increase rigidity in structures, in other words, for reinforcement. Another important result determined in the study was the observation of the adherence of titanium dioxide and similar nanomaterials mentioned in the introduction to concrete structure surfaces was at the highest level.

• Advances in nano research
• /
• v.12 no.1
• /
• pp.65-72
• /
• 2022

The dynamic properties (frequencies, mode shapes, damping ratios) of the scaled WPC warehouse are compared using the operational modal analysis approach to the dynamic parameters (frequencies, mode shapes, damping ratios) of the full outer surface of titanium dioxide, 70 micron in thickness. Micro tremor ambient vibration data on ground level was used to provide ambient excitation. For the output-only modal identification, Enhanced Frequency Domain Decomposition (EFDD) was used. This study discovered a strong correlation between mode shapes. Titanium dioxide applied to the entire outer surface of the scaled WPC warehouse results in an average 14.05 percent difference in frequency values and 7.61 percent difference in damping ratios, demonstrating that nanomaterials can be used to increase rigidity in structures, or for reinforcement. Another significant finding in the study was the highest level of adherence of titanium dioxide and similar nanomaterials mentioned in the introduction to WPC structure surfaces.

• Water for future
• /
• v.20 no.1
• /
• pp.55-61
• /
• 1987

This Study is to estimate depth-length ratios by the frequency analysis of simultaneous rainfall data on fixed points in the Han -River basin. The depth-length ratios are based on examination of spatial and temporal correlation structures of the Han-River basin's rainfall. This Study reveals that the depth-length ratios are decreasing as the distance of the basin increases and that they are increasing as the duration of rainfall increases. This study also shows that the ratios tend to decrease as the return period increase. The results present general equations and characteristic equations of depth-length ratios, figures and characteristic parameter tables which explain the temporal and spatial structures of rainfall in the Han-River basin.

• Speech Sciences
• /
• v.12 no.3
• /
• pp.49-57
• /
• 2005

The purpose of the this study was to establish preliminary data on the characteristic of dysfluency in monologue. The subjects were 30 normal speaking adults(15 males and 15 females), aged from 18 to 30 and 30 normal speaking children, aged from 8 to 10. This study attempted to sample 1-minute portion of talking about the daily routine. Videotapes were made to analyze his/her speech sample in terms of the patterns and the frequency of dysfluency. The result of the present study were a follows: (1) The children had total dysfluency type ratios of 12.48%, dysfluency type ratios of 2.83%. Interjection was the most frequently occuring, followed by revision, incomplete phrase. (2) The adults had total dysfluency type ratios of 8.51%, dysfluency type ratios of 0.59%. Interjection was the most frequently occuring, followed by revision, syllable repetition. (3) In adults, both total dysfluency type ratios and dysfluency type ratios differed significantly by the gender. (4) Both total dysfluency type ratios and dysfluency type ratios differed significantly between adults and children.

• Earthquakes and Structures
• /
• v.7 no.6
• /
• pp.1283-1301
• /
• 2014

Ground motion modification is extensively used in seismic design of civil infrastructure, especially where few or no recorded ground motions representative of the design scenario are available. A site in Los Angeles, California is used as a study site and 28 ground motions consistent with the design earthquake scenario are selected. The suite of 28 ground motions is scaled and modified in the time domain (TD) and frequency domain (FD) before being used as input to a bilinear SDOF system. The median structural responses to the suites of scaled, TD-modified, and FD-modified motions, along with ratios of he modified-to-scaled responses, are investigated for SDOF systems with different periods, strength ratios, and post-yield stiffness ratios. Overall, little difference (less than 20%) is observed in the peak structural accelerations, velocities, and displacements; displacement ductility; and absolute accelerations caused by the TD-modified and FD-modified motions when compared to the responses caused by the scaled motions. The energy absorbed by the system when the modified motions are used as input is more than 20% greater than when scaled motions are used as input. The observed trends in the structural response are predominantly the result of changes in the ground motion characteristics caused by modification.

• The Journal of Korean Medicine
• /
• v.32 no.4
• /
• pp.139-148
• /
• 2011

Objective: The purpose of this study was to investigate the effect of food intake on the Fourier components of radial pulse wave. Methods: Thirty-one healthy male subjects participated in this study. Radial pulse was measured using 3 dimensional pulse imaging system (DMP-3000) before, right after, 40 minutes after, 80 minutes after and 120 minutes after food intake. Fourier transform was performed and the frequency and amplitude of Fourier components were analyzed. Results: 1. The frequency and the amplitude of Fourier components of radial pulse wave increased significantly after food intake. 2. The frequency of Fourier components increased right after food intake and then gradually decreased as time passed, however the amplitude of Fourier components increased and maintained certain levels and patterns throughout the experimental period of 120 minutes. 3. The change ratios of the frequency and the amplitude of Fourier components after food intake varied with the pulse measuring locations. Conclusions: Food intake exerts an influence on radial pulse wave, resulting in increase of frequency and amplitude of Fourier components. The change ratios of the frequency and the amplitude of Fourier components after food intake varied with the pulse measuring locations.