• Title/Summary/Keyword: Frequency of Sequence

Search Result 909, Processing Time 0.029 seconds

Transient Vibration Analysis of an Agricultural Tractor (농업용 트랙터의 과도 진동 분석)

  • 김용준;김경욱
    • Journal of Biosystems Engineering
    • /
    • v.26 no.6
    • /
    • pp.509-516
    • /
    • 2001
  • This paper introduced some advantages of the time-frequency analysis of vibration and investigated, using the time-frequency transform, the characteristics of the transient motion of a tractor seat, which occurred during the tractor traversed over a rectangular obstacle on the flat surface. The characteristics of the short-time courier and wavelet transforms as time-frequency analysis methods were introduced and discussed to figure out which is more suitable to the analysis of the transient motions of agricultural tractors. Using each transform, transient vibration of a tractor seat was analyzed. Results of the analysis showed that the transient vibration of the seat was influenced by the natural frequencies of vertical mode of chassis, pitching mode of engine and pitching mode of cab of the tractor. The time sequence of the natural mode of tractor vibration was also revealed by the time-frequency analysis. The vibration path analysis by the time-frequency transform showed that the vibration energies transmitted from the front mounts to the seat were less than those from the rear mounts. The energy reduction ratios between the cab mounts and seat were also estimated to be about 72∼78%. The front mounts showed larger reduction than the rear mounts. However, the reduction difference between the right and left sides mounts was negligibly small. The short time Fourier transform was found to be a proper method for investigating the transient motions of farm machines and their effects on the ride vibration.

  • PDF

Prevalence of negative frequency-dependent selection, revealed by incomplete selective sweeps in African populations of Drosophila melanogaster

  • Kim, Yuseob
    • BMB Reports
    • /
    • v.51 no.1
    • /
    • pp.1-2
    • /
    • 2018
  • Positive selection on a new beneficial mutation generates a characteristic pattern of DNA sequence polymorphism when it reaches an intermediate allele frequency. On genome sequences of African Drosophila melanogaster, we detected such signatures of selection at 37 candidate loci and identified "sweeping haplotypes (SHs)" that are increasing or have increased rapidly in frequency due to hitchhiking. Based on geographic distribution of SH frequencies, we could infer whether selective sweeps occurred starting from de novo beneficial mutants under simple constant selective pressure. Single SHs were identified at more than half of loci. However, at many other loci, we observed multiple independent SHs, implying soft selective sweeps due to a high beneficial mutation rate or parallel evolution across space. Interestingly, SH frequencies were intermediate across multiple populations at about a quarter of the loci despite relatively low migration rates inferred between African populations. This invokes a certain form of frequency-dependent selection such as heterozygote advantage. At one locus, we observed a complex pattern of multiple independent that was compatible with recurrent frequency-dependent positive selection on new variants. In conclusion, genomic patterns of positive selection are very diverse, with equal contributions of hard and soft sweeps and a surprisingly large proportion of frequency-dependent selection in D. melanogaster populations.

Design and Performance Analysis of the Efficient Equalization Method for OFDM system using QAM in multipath fading channel (다중경로 페이딩 채널에서 QAM을 사용하는 OFDM시스템의 효율적인 등화기법 설계 및 성능분석)

  • 남성식;백인기;조성호
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.6B
    • /
    • pp.1082-1091
    • /
    • 2000
  • In this paper, the efficient equalization method for OFDM(Orthogonal Frequency Division Multiflexing) System using the QAM(Quadrature Amplitude Modulation) in multipath fading channel is proposed in order to faster and more efficiently equalize the received signals that are sent over real channel. In generally, the one-tap linear equalizers have been used in the frequency-domain as the existing equalization method for OFDM system. In this technique, if characteristics of the channel are changed fast, the one-tap linear equalizers cannot compensate for the distortion due to time variant multipath channels. Therefore, in this paper, we use one-tap non-linear equalizers instead of using one-tap linear equalizers in the frequency-domain, and also use the linear equalizer in the time-domain to compensate the rapid performance reduction at the low SNR(Signal-to-Noise Ratio) that is the disadvantage of the non-linear equalizer. In the frequency-domain, when QAM signals, consisting of in-phase components and quadrature (out-phase) components, are sent over the complex channel, the only in-phase and quadrature components of signals distorted by the multipath fading are changed the same as signals distorted by the noise. So the cross components are canceled in the frequency-domain equalizer. The time-domain equalizer and the adaptive algorithm that has lower-error probability and fast convergence speed are applied to compensate for the error that is caused by canceling the cross components in the frequency-domain equalizer. In the time-domain, To compensate for the performance of frequency-domain equalizer the time-domain equalizes the distorted signals at a frame by using the Gold-code as a training sequence in the receiver after the Gold-codes are inserted into the guard signal in the transmitter. By using the proposed equalization method, we can achieve faster and more efficient equalization method that has the reduced computational complexity and improved performance.

  • PDF

Performance Comparison of the OFDM/SFH and OFDM/DS Systems in the Jamming Channel (OFDM/SFH와 OFDM/DS 시스템의 Jamming 채널에서 성능비교)

  • 박종현;김상우;유흥균;이상태
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.14 no.11
    • /
    • pp.1149-1155
    • /
    • 2003
  • OFDM/SFH(orthogonal frequency division multiplexing/slow frequency hopping) system is the combination of OFDM communication system with frequency hopping(FH) method and OFDM/DS(orthogonal frequency division multiplexing/direct sequence) system combines the OFDM communication system with direct sequence(DS) method in terms of PN(pseudo noise) sequence. These two systems are also can be used for anti-jamming. In this study we analyze performances of OFDM/SFH system and OFDM/DS system with the equal information rate in partial band jamming and tone jamming channel. We find BER(bit error rate) in the variation of JFR(jamming fractional ratio) and JSR(jamming to signal power ratio) of the partial band jamming. Also, BER is found in the several JSR of the single tone or multi tone jamming. OFDM/DS system shows better performance than OFDM/SFH system in partial band jamming environment. OFDM/DS system has about 2.5 ㏈ SNR(signal to noise power ratio) gains than OFDM/SFH system when JFR=4/16 and JSR=0 ㏈ to meet BER=10$\^$-3/. However, OFDM/SFH system has about 3 ㏈ SNR gains than OFDM/DS system at single tone jamming of JSR=5 ㏈. In multi tone jamming, performance of OFDM/SFH system is considerably degraded than OFDM/DS system.

Implementation of DYLAM-3 to Core Uncovery Frequency Estimation in Mid-Loop Operation

  • Kim, Dohyoung;Chang hyun Chung;Moosung Jae
    • Nuclear Engineering and Technology
    • /
    • v.30 no.6
    • /
    • pp.531-540
    • /
    • 1998
  • The DYLAM-3 code which overcomes the limitation of event tree/fault tree was applied to LOOP (Loss of Off-site Power) in the mid-loop operation employing HEPs (Human Error Probabilities) supplied by the ASEP (Accident Sequence Evaluation Program) and the SEPLOT (Systematic Evaluation Procedure for Low power/shutdown Operation Task) procedure in this study. Thus the time history of core uncovery frequency during the mid-loop operation was obtained. The sensitivity calculations in the operator's actions to prevent core uncovery under LOOP in the mid-loop operation were carried out. The analysis using the time dependent HEP was performed on the primary feed & bleed which has the most significant effect on core uncovery frequency. As the result, the increment of frequency is shown after 200 minutes duration of simulation conditions. This signifies the possibility of increment in risk after 200 minutes. The primary feed & bleed showed the greatest impact on core uncovery frequency and the recovery of the SCS (Shutdown Cooling System) showed the least impact. Therefore the efforts should be taken on the primary feed & bleed to reduce the core uncovery frequency in the mid-loop operation. And the capability of DYLAM-3 in applying to the time dependent concerns could be demonstrated.

  • PDF

New 3-Phase Phase Locked Loop(PLL) Strategy Haying Frequency Limiter and Anti-windup Suitable to Uninterruptible Power Supply (무정전전원장치에 적합한 주파수 제한기와 안티 와인드업을 가지는 새로운 3상 전원각 정보 추출 방식)

  • Ji, Jun-Keun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.6
    • /
    • pp.1086-1091
    • /
    • 2006
  • In this paper an advanced PLL strategy suitable to UPS, compared with conventional PLL strategy using the positive sequence component extracted from source voltages, is suggested. Frequency limiter and anti-windup are added to conventional PI controller in suggested PLL strategy. Basic operational principle of suggested PLL is same as that of conventional PLL, but the difference between two strategies is that the suggested PLL can limit the change of frequency in constant range because of inclusion of frequency limiter. Compute. simulation was carried fer the DVR(dynamic voltage restorer) compensating voltage to examine the difference between conventional PLL strategy and the suggested PLL strategy limiting frequency. And the results clearly demonstrate the effectiveness of the suggested PLL strategy for UPS.

  • PDF

Facies and sequence analysis on the Lower Ordovician Mungok Formation (전기 오오도비스기 문곡층의 시퀀스 및 상 분석)

  • Choi Yong Seok;Lee Yong Il
    • The Korean Journal of Petroleum Geology
    • /
    • v.9 no.1_2 s.10
    • /
    • pp.1-15
    • /
    • 2001
  • Hierarchically controlled sequence stratigraphic analysis shows that the Lower Ordovician mixed carbonatesiliciclastic Mungok Formation, Korea consists of three depositional sequences: T1, T2, and T3 in ascending order. Sequence boundaries are generally marked by abrupt transition from coarse-grained shallow-water carbonates to finegrained deeper-water carbonates mixed with fine-grained siliciclastics, and show indication of subaerial exposure such as karstification. Within this sequence stratigraphic framework, facies characteristics indicate that the Mungok sequences were mostly deposited on a subtidal ramp without slope break. The Mungok ramp had been under the influence of frequent tropical storm activity during deposition. The difference in lithology of tempestites seems to have been controlled by the nature of substrates and by proximality. High-frequency cycles consist of upward-shallowing facies successions. Cycles of shallow-water and basinal deposits are not well represented, probably due to cycle amalgamation. Cycle stacking patterns do not show a consistent thickness change that is usually associated with a large-scale sea-level change probably because of unfilled accommodation space.

  • PDF

Computationally-Efficient Design of Training Symbol for Multi-Band MIMO-OFDM System (다중밴드를 사용하는 MIMO-OFDM에 적합한 연산효율적 훈련심볼의 설계)

  • Kim, Byung-Chan;Jeon, Tae-Hyun;Cheong, Min-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.5A
    • /
    • pp.479-486
    • /
    • 2008
  • In this paper, an efficient training symbol design with m-sequence is proposed for the MIMO-OFDM based next generation wireless transmission system which supports gigabits per second data rate. In the traditional blute force method, the preamble design is based on the case by case comparison with the system requirements. This paper discusses a training symbol design methodology for the MIMO-OFDM system based on the m-sequence which has been widely used in the spread spectrum communication areas due to its good correlation characteristics. Also the step-by-step design and performance verification method within the limited search space is discussed. The proposed method targets the design of the training symbol which satisfies system requirements for the packet based MIMO-OFDM wireless communication system including automatic gain control(AGC), timing synchronization, frequency and sampling offset estimation, and MIMO channel estimation.

Design of a wavelet adaptive filter for removal of the baseline wandering (기저선 변동 제거를 위한Wwavelet Adaptive Filter의 설계)

  • 박광리;이경중;윤형로
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.34S no.10
    • /
    • pp.80-88
    • /
    • 1997
  • This paper describes a design of a Wavelet Adaptive Filter(WAF) for the removal of the baseline wandering and the minimization of the signal distortion using by wavelet transform and adaptive filter in the ECG signal. WAF consists of two parts. The first part is wavelet transform that decomposes the ECG signal into seven frequency bands using Vaidyanathan and Hoang wavelet. The second part is adaptive filter that uses the signal of seventh low frequency band among the wavelet transformed signals as primary input and a unit impulse sequence as reference input. For the evaluation of the performance of WAF, we used several baseline wandering elimination filters such as commerical standard filter with cutoff frequency of 0.5Hz and general adaptive filter. We made use of MIT/BIH database and real patient data for the evaluation. In conclusion, WAF showed a lower ST segement distortion than standard filter and adaptive filter and has a higher eliminated noise power than standard filter and adaptive filter.

  • PDF

A Pulse Synchronization Method for a Frequency-Based UWB System (주파수 기반 UWB 시스템의 펄스 동기 방법)

  • Choi, Ho-Seon;Jang, Dong-Heon;An, Dong-Hun;Yang, Hoon-Gee;Yang, Seong-Hyeon;Kang, Moon-Sik;Kim, Se-Jung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.3A
    • /
    • pp.240-247
    • /
    • 2008
  • In this paper, we propose a digitally implementable synchronization method for the UWB system. This is achieved by manipulating the frequency components of a synchronizing signal which is the sequence of pulses of periodicity. We analyze the dependancy of the number of pulses and pulse interval on the intrinsic synchronization accuracy. Moreover, through the computer simulation, the performance of the proposed method is examined via varying system parameters.