• 제목/요약/키워드: Frequency measurement

검색결과 4,240건 처리시간 0.034초

Centralized Adaptive Under Frequency Load Shedding Schemes for Smart Grid Using Synchronous Phase Measurement Unit

  • Yang, D.Y.;Cai, G.W.;Jiang, Y.T.;Liu, C.
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권3호
    • /
    • pp.446-452
    • /
    • 2013
  • Under frequency load shedding (UFLS) is an effective way to prevent system blackout after a serious disturbance occurs in a power system. A novel centralized adaptive under frequency load shedding (AUFLS) scheme using the synchronous phase measurement unit (PMU) is proposed in this paper. Two main stages are consisted of in the developed technique. In the first stage, the active power deficit is estimated by using the simplest expression of the generator swing equation and static load model since the frequency, voltages and their rate of change can be obtained by means of measurements in real-time from various devices such as phase measurement units. In the second stage, the UFLS schemes are adapted to the estimated magnitude based on the presented model. The effectiveness of the proposed AUFLS scheme is investigated simulating different disturbance in IEEE 10-generator 39-bus New England test system.

Compensation of errors caused by resonance vibration of measurement system in impact force measurement

  • Usui, Y.;Miyazawa, S.;Sawai, N.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
    • /
    • pp.593-596
    • /
    • 1994
  • When a force impulse acting on a massive and plex object is measured with a dynamometer, be resonant vibration of the measurement system often leads to serious inaccuracies. A more accurate measurement is obtained when the transfer function ,of the object-dynamometer system is used to compensate for the error in the dynamometer's output signal. The natural frequency and the damping coefficient of the transfer function are estimated by analyzing the waveform of the free damped vibration period after the loading of the force has ended. The residue of the system is determined such that the compensated force spectrum becomes smooth within a neighborhood of the natural frequency. The effectiveness of this signal processing method is experimentally tested on a hammer impulse, under the assumption that the hammer's high resonant frequency accurately models the problems encountered in force impact measurement. The compensation method is used to derive a improved estimate of the hammer impulse.

  • PDF

4채널 지연선로를 이용한 디지털 주파수 판별기 구현에 관한 연구 (Study on Implementation of a Digital Frequency Discriminator using 4 channel Delay line)

  • 국찬호;권익진
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 춘계학술대회
    • /
    • pp.512-515
    • /
    • 2010
  • 공간상에 존재하는 전자파를 측정, 분석하여 신호정보(SIGINT; SIGnal INTelligence)를 획득하기 위해서 가장 중요한 것이 전자파의 주파수 정보이다. 특히 레이다 및 미사일에서 방사되는 초고주파 대역의 주파수를 순시 측정하는 방법으로, 지연선로의 위상차를 측정하여 주파수정보를 디지털데이터를 출력하는 부품으로 디지털 주파수 판별기(Digital frequency Discriminator; DFD)가 있다. DFD는 100nSec 이하의 짧은 시간동안에 존재하는 고주파 신호에 대해서도 초고주파신호의 주파수 정보를 실시간으로 측정하여 제공해야 한다. 본 논문에서는 광대역 4 채널의 지연선로와 코릴레이터로 구성된 고주파 입력부와 I/Q신호를 처리하여 주파수 정보를 얻어내는 디지털 처리부 및 정확한 주파수 정보를 얻기 위한 주파수 보정부로 이루어진 DFD의 구현방안을 제안하고 아주 짧은 펄스 형태의 모의 레이다 신호를 입력하여 얻은 시험결과를 토대로 설계의 타당성을 확인한다.

  • PDF

FTP를 이용한 이중 파장법에 의한 3차원 형상 측정 (A 3D measurement system based on a double frequency method using Fourier transform profilometry)

  • 구자명;조태훈
    • 한국정보통신학회논문지
    • /
    • 제19권6호
    • /
    • pp.1485-1492
    • /
    • 2015
  • 본 논문은 프린지 패턴 투영법으로 3차원 형상 측정에서의 FTP(Fourier Transform Profilometry)를 이용한 이중 파장법을 제안한다. 프린지 패턴 투영 방법은 프린지 패턴을 측정 대상물체에 투영한 후 변형된 프린지 패턴을 분석하여 측정 대상물체의 높이를 측정한다. PMP(Phase Measuring Profilometry)기반의 프린지 투영 방법은 측정 대상의 반사율과 배경의 영향에 강건하면서 측정 분해능이 높다. 하지만, 2π 모호성으로 측정 범위가 작다는 문제점이 있다. 이를 극복하기 위한 방법 중에 주기가 다른 이중 파장을 사용하는 방법은 측정 분해능을 유지하면서 측정 범위를 높일 수 있지만, 2배의 영상 수 획득으로 측정시간이 두 배 정도 더 소요된다. 본 논문에서 제안하는 FTP를 이용한 이중 파장법은 2π 모호성을 해결하기 위해 한 장만의 영상을 추가적으로 획득하여 FTP를 이용함으로써 기존의 이중 파장법과 동일한 정밀도를 유지하면서 측정에 소요되는 시간을 효과적으로 단축시킨다.

Realtime Measurement of Impedance Locus using Impedance Spectroscopy: How Many and How Low Frequencies Are Required \ulcorner

  • T., Fukumoto;G. M., Eom;S., Ohba;N., Hoshimiya
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1194-1197
    • /
    • 2004
  • High temporal-resolution and accurate measurement of skin impedance locus provides useful data for the identification of the physiological/psychological changes and also the identification of acupuncture point. An impedance spectroscopy method using digitally constructed current waveform consisting of many frequency components (multiples of 1Hz) was reported3. The time resolution of the method depends on the lowest frequency used in the waveform construction, and therefore, the measurement would be faster if the lowest frequency is the higher. However, it was not clear that how many and how low frequencies must be used for the estimation of the skin impedance parameters from which the impedance locus can be drawn. This study shows the relationship between the estimation error of the impedance parameters and the frequency coverage of the spectroscopy. The results of this study are expected to serve as the reference of the frequency selection in the impedance spectroscopy.

  • PDF

거리 측정용 주파수 변조 연속파 레이더 개발에 관한 연구 (A study on the Development of Frequency Modulated Continuous Wave Radar for Distance Measurement)

  • 박동국;한태경;이현수
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2005년도 전기학술대회논문집
    • /
    • pp.1005-1010
    • /
    • 2005
  • In this paper, it is presented a frequency modulated continuous wave radar (FMCW) for distance measurement. The frequency range is $10{\sim}11$ GHz and the sweep time of the signal is 100 ms. The test target is 0.8 m2 of metal plate. The experiment is performed in open ground and the pyramidal horn antenna of about 22 dBi gain is used. The beat frequency according to the target moving to 40 m is measured. There is a good agreement between measured and calculated results. But the resolution of the FMCW radar is not good such as about 10 cm. It is result from the nonlinear signal of voltage controlled oscillator (VCO). To improve the nonlinear characteristic of VCO, a high pass filter and phase locked loop (PLL) frequency synthesizer are included in the radar system.

  • PDF

전달율 측정에 의한 점탄성재료의 복소탄성계수 추출시의 민감도 분석 (Sensitivity Analysis in the Estimation of Complex Elastic Modulus of Viscoelastic Materials by Transmissibility Measurements)

  • 안태길;허진욱;김광준
    • 소음진동
    • /
    • 제2권2호
    • /
    • pp.99-106
    • /
    • 1992
  • The complex Young's modulus of a viscoelastic material can be obtained as a function of frequency from the measurements of relative motion between the two ends of a bar-type specimen. Non-resonance method is usually used to obtain the complex Young's modulus over wide range of frequency including resonance points, while in resonance method information at resonance frequencies only is used. However, the complex Young's modulus obtained by the non-resonance method is often unreliable in the anti-resonance frequency regions because of the measurement noise problems. In this study, the effects of the random measurement errors on estimating the complex Young's modulus are studied in the aspect of sensitivity, and how to obtain the reliable frequency region for a given measurement error level is shown. The usable frequency regions in determining the complex Young's modulus are represented by a non-dimensional parameter formed with the wave length and specimen length.

  • PDF

주파수 보정법에 의한 구동기 외란 파라미터 정밀 결정 (PRECISION IDENTIFICATION OF ACTUATOR DISTURBANCE PARAMETER BY FREQUENCY COMPENSATION)

  • 이현호;전동익;오화석
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2005년도 한국우주과학회보 제14권1호
    • /
    • pp.138-142
    • /
    • 2005
  • 위성자세제어용 구동기 인 반작용 휠은 축 방향 토크뿐만 아니 라 횡 축 방향 외 란 토크와 힘을 발생시켜 위성의 정밀 지향 안정성에 영향을 미치게 된다. 이를 위해서는 반작용 휠 구동시의 발생 외란을 정밀하게 측정할 필요가 있다. 그러나 반작용 휠의 구동은 측정테이블의 진동을 야기 시키고 테이블의 공진 주파수 영역에서 큰 측정 오차를 유발한다. 본 논문은 이러한 진동오차들을 줄이기 위하여 주파수 보정법에 의한 사후처리 과정을 제시하고, 이 보정법으로 얻어진 데이터들로부터 외란 파라미터를 결정함으로써 구동기 외란의 보다 정밀한 측정을 가능케 하기 위함이다. 이 보정법을 적용함으로써 구동기 외란 측정 주파수범위를 넓힐 수 있다.

  • PDF

터널 유지관리계측의 측정 및 분석주기 설정 연구 (A study on establishment of measurement and analysis frequency of maintenance monitoring in tunnel)

  • 우종태;이강일
    • 한국터널지하공간학회 논문집
    • /
    • 제14권2호
    • /
    • pp.117-129
    • /
    • 2012
  • 본 논문에서는 1995년 서울지하철 5, 7, 8호선 터널구조물에 국내 최초로 설치되어 운영 중에 있는 터널 유지관리 계측시스템에 대한 측정 및 분석주기를 국내 및 국외 적용사례와 국내 터널의 유지관리계측 분석결과 및 시설물안전관리 관계법령기준을 검토하여 향후에 적용할 터널 유지관리계측의 측정 및 분석주기를 설정하고자 연구를 수행하였다. 현재까지의 계측주기로 계측관리를 한 결과 계측주기에 따른 문제는 없는 것으로 판단되었다. 국내 지하철 5, 6호선 4개 터널의 유지관리계측 분석결과 콘크리트 라이닝 응력과 철근응력이 약 45개월 경과시점에서 서서히 수렴하는 것으로 분석되어 계측기 설치 후 약 4년 까지는 계측 측정 및 분석주기를 빈번하게 하고, 4년 이후에는 빈도를 늦추는 것이 타당할 것으로 판단된다.

실험 오차가 주파수 응답함수에 미치는 영향 (The Effects of Measurement Errors on Frequency Response Functions(FRFs))

  • 정해일
    • 한국실천공학교육학회논문지
    • /
    • 제3권1호
    • /
    • pp.45-50
    • /
    • 2011
  • 유한요소 해석(FEA: finite element analysis)의 발달로 복잡한 기계나 자동차 및 구조물에 대해서도 상세한 진동해석을 할 수 있게 되었다. 그러나, 복잡한 구조물을 정확하게 모형화하기 어렵고, 특히 접합부의 강성과 감쇠 특성을 알기 어렵고, 복잡한 형상을 단순화하는 과정에서 발생하는 오차 등의 이유로 유한요소해석 결과는 부정확할 수 있다. 반면에 실제 구조물의 실험 데이터로부터 추출한 실험적 모드해석(modal testing) 결과는 상세하지는 않지만 정확하다고 볼 수 있다. 그러나 실험 결과가 구조물의 진동 특성을 정확하게 나타낸다는 가정은 여러 가지 측정 오차로 인하여 정확하지 않을 수 있다. 이 논문에서는 실험적 모드해석의 기본이 되는 FRF(frequency response function; 주파수 응답함수)의 측정에 영향을 미치는 오차들을 측정 오차와 신호처리 오차로 구분하여 각각에 대해 세밀히 살펴보고, 그러한 오차들을 감소함으로써 보다 정확한 FRF를 구하는 방법에 대해서 고찰해보았다.

  • PDF