• 한국자기학회지
• /
• 제8권1호
• /
• pp.21-26
• /
• 1998

온도에 따른 비정질 금속 Co66Fe4Ni1B14Si15의 자기 임피던스의 변화를 저온 장치를 써서 시료의 온도를 10K∼300K까지 변화시키면서 측정하였다. 이때, 시료에 겉어준 교류전류를 10mA로 고정시키고 주파수를 100KHz에서 10MHz 까지 변화시켰다. MIR (Magneto-Impedance Ratio)은 온도가 증가함에 따라 급격히 증가하였으며, MIR(T)≡MIR(0)exp(cT2)의 관계식으로 나타났다. 상온에서 측정한 MIR 값은 측정 주파수내에서 10K에서의 값보다 2∼3배 크게 나타났다. 이 결과는 MI 온도 효과를 이용한 온도 센서로서의 가능성을 제시한다. MIR 곡선의 모양은 온도의 증가에 따라 큰 변화가 없었으며 MIR은 주파수 증가에 따라 커지면서 MIR 곡선의 모양이 퍼지는 전형적인 경향을 나타냈다.

• Advanced Composite Materials
• /
• 제16권1호
• /
• pp.1-10
• /
• 2007

Composite materials consisting of crushed carbon fiber reinforced plastics (CFRP) pieces and acrylonitrile-butadiene-styrene (ABS) resin were prepared by an injection mold method to solve the problem of recycling of CFRP. The electrical properties, such as electrical resistivity, alternating current impedance and electromagnetic interference (EMI) shielding effect, were measured for the composites. The electrical resistivity of the composites showed a percolation type of conduction behavior and no difference between parallel and perpendicular to the injection direction was observed for CFRP content higher than the critical value. Measurement of alternating current impedance revealed that the conduction mechanism is attributed to the direct conductive paths generated by distributed carbon fibers; however, strong frequency dependence of the impedance was observed for the CFRP content near the critical one. The frequency dependence of the impedance is caused by the inter-fiber connection and can be expressed as a simple equivalent circuit. The absorption component of shielding effect (SE) was smaller than the expected value estimated from its resistivity. The decline of SE is thought to be caused by the decrease in effective thickness due to fiber orientation.

• 한국전기전자재료학회논문지
• /
• 제11권7호
• /
• pp.541-545
• /
• 1998

(PZT, PST, PT)/ YBCO structured have been grown on single crystal $LaAlO_3$ using in-situ Nb:YAG pulsed laser deposition technique. The optimum conditions of fabrication for high quality films have been established under various oxygen pressure. TBCO was used as a metallic electrode for polarizing ferroelectric thin fillms. Lattice mismatch of these materials were found to be with in 3%. As a result XRD patterns and rocking curves, (PZT, PST, PT)/ YBCO multiayered thin films on $LaAlO_3$ substrates showed preferred orientation to c-axis. For invastigation on electrical properties of ferroelectric thin films, remanent polaiztion $P_r$ and coercive field $E_c$ were measured for three samples. At each optimum condition, they showed the values of P_r=60 \mu C/cm^2 and E_c=240kV/ cm for PT, 30\mu C/cm^2 and 105kV/cm for PZT, 1.5\mu C/cm^2$ and 15kV/cm for PST. Frequency dependence of dielectric properties of ferroelectric thin fillms was also investigated. As a result, it showed the frequency dependence was relatively small in the range of 10Hz~10kHz.

• 한국재료학회지
• /
• 제21권7호
• /
• pp.377-383
• /
• 2011

Thermoelectric power, dc conductivity, and the dielectric relaxation properties of $La_2NiO_{4.03}$ are reported in the temperature range of 77 K - 300 K and in a frequency range of 20 Hz - 1 MHz. Thermoelectric power was positive below 300K. The measured thermoelectric power of $La_2NiO_{4.03}$ decreased linearly with temperature. The dc conductivity showed a temperature variation consistent with the variable range hopping mechanism at low temperatures and the adiabatic polaron hopping mechanism at high temperatures. The low temperature dc conductivity mechanism in $La_2NiO_{4.03}$ was analyzed using Mott's approach. The temperature dependence of thermoelectric power and dc conductivity suggests that the charge carriers responsible for conduction are strongly localized. The relaxation mechanism has been discussed in the frame of the electric modulus and loss spectra. The scaling behavior of the modulus and loss tangent suggests that the relaxation describes the same mechanism at various temperatures. The logarithmic angular frequency dependence of the loss peak is found to obey the Arrhenius law with activation energy of ~ 0.106eV. At low temperature, variable range hopping and large dielectric relaxation behavior for $La_2NiO_{4.03}$ are consistent with the polaronic nature of the charge carriers.

• 대한전자공학회논문지
• /
• 제11권4호
• /
• pp.23-28
• /
• 1974

이심코일을 포함한 회로를 정밀하게 설계하는데 있어서 늘 골치거리가 되는 것은 실제의 코일의 Q가 주파수에 따라 변하는 사실을 어떻게 처리할 것인가 하는 것이다. 자심손실 자체가 주파수에 따라 복잡하게 변하기 때문에 일정한 직렬저항, 병렬커패시턴스를 부가한 종래의 등가회로는 이 경우 거의 유용성을 상실한다. 본논문에서는 우선 주어진 자심의 Q를 인덕턴스와 주파수의 함수로 표시하는 수학적 표시식을 가정하고 그것이 자심제조업자가 제공하는 또는 실험적으로 얻어지는 data에 가장 잘 들어맞도록 표시식의 퍼래미터들을 결정한다. 다음에 회로설계는 최적화방법을 쓰되 그 각 반복단계에서 요구되는 회로의 주파수응답의 정밀한 계산을 위에서 얻은 Q의 표시식을 이용하여 수행한다. 환언하면 본 논문에서 제시된 방법은 코일의 Q의 근사적 표시식과 최적화방법을 효과적으로 함께 사용한 것이며 이것으로서 상술한 실제적 코일에 부수된 난문제는 많이 해결되었다고 본다. 최적화방법으로서는 Fletcher-Powell 방법을 이용했으며 한가지 예제를 들어 본 논문에서 제시한 방법을 설명하였다.

• 비파괴검사학회지
• /
• 제25권5호
• /
• pp.362-367
• /
• 2005

후방복사된 초음파의 입사각 의존성(프로파일)은 입사지역이 다층경계이거나 깊이방향으로 물성변화가 있을 때 주파수 의존적이다. 지금까지 측정된 후방복사 프로파일은 주로 사용된 탐촉자의 중심 주파수의 특성에 의존하여 표면탄성파의 전반적인 주파수 의존 특성을 이해하는 데는 어려움이 많았다. 디지털 오실로스코프의 DFP(digital filter package)를 이용하여 주파수 대역별 후방복사 프로파일이 실시간 획득되었다. #1200 사포로 표면 처리된 상업적 강재 시편에 대한 주파수 대역별 측정으로부터 표면탄성파가 2% 정도의 음의 기울기(loaded case) 속도 분산성이 있음을 알았고 심하게 녹이 쓴 시편에서는 주파수 대역별로 프로파일의 형태에 큰 변화를 보였다. 주파수 대역별 후방복사 프로파일은 분산성을 가진 표면지역에 대한 비파괴적 평가에 매우 유용할 것으로 본다.

• 생물정신의학
• /
• 제12권2호
• /
• pp.196-206
• /
• 2005

Objectives:The purpose of this study is to evaluate the pathophysiology of alcoholics by investigating the differences in frequency of Aldehyde Dehydrogenase 2(ALDH2) genotypes and ALDH2 alleles between patients with alcohol dependence and controls, and the differences of drinking and personality traits in Korean male alcoholics with ALDH2 genotype variances. Methods:The authors selected 98 patients with alcohol dependence and 53 controls. Self-report questionnaires for acute reponses after alcohol ingestion, the AUI(Alcohol Use Inventory), and the NEO-PI-R(NEO Personality Inventory Revised) were given to all patients with alcohol dependence. ALDH2 genotypes were typed with MboII RFLP(Restriction Fragment Length Polymorphism) method in 53 controls and 98 patients with alcohol dependence. The authors divided alcoholic patients into two groups according to the presence of variant $ALDH2^2$ allele;normal ALDH2 alcoholics(N=87) and variant ALDH2 alcoholics(N=11). Results:1) The genotypic frequencies of subjects with $ALDH2^{1/1}$ were higher and those with $ALDH2^{1/2}$ and $ALDH2^{2/2}$ were lower in patients than in controls. 2) Alcohol dependence could be found in $ALDH2^{2/2}$ homozygote individuals. 3) Variant ALDH2 alcoholics had more family problems in the AUI than normal ALDH2 alcoholics. 4) Variant ALDH2 alcoholics experienced more flushing and cardiovascular responses after alcohol ingestion than normal ALDH2 alcoholics. 5) Variant ALDH2 alcoholics had less altruistic personality traits in the NEO-PI-R than normal ALDH2 alcoholics. 6) Variant ALDH2 alcoholics tended to have more tolerance to alcohol than normal ALDH2 alcoholics. Conclusion:Variant $ALDH2^2$ allele might play a protective role in the pathogenesis of alcohol dependence and there were several significant differences of drinking and personality traits in Korean male alcoholics with ALDH2 genotype variances.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.1031-1041
• /
• 1992

Existing current-controlled inverters with hysteresis controller (HC) result in the dependence of the inverter on its load characteristics, poor inverter utilization due to too much or too little supply voltage, and the current error in the hysteresis band(HB) which causes deterioration of operation of the supplied motor. In this paper, techniques and results of modeling the operation of current-controlled three phase power inverter with HC are presented. Four symmetrical control schemes are considered: the so called three independent control, three semi-dependent control(a), three semi-dependent control(b) and three dependent control each using three current controller. The dependence of the inverter on its load has been studied. To overcome this difficulty, an inner feedback control has been introduced and optimum parameter has been determined. With the addition of an inner feedback control, adjustment of the switching frequency to a desired value is possible. Also, this modification improves operating characteristics of inverter by enforcing a switching pattern of low dependence on the load, resulting in significantly improved quality of the output current.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.48-52
• /
• 2012

This paper describes experimental study on the orientation dependence of GM-type pulse tube refrigerator with helium and neon as working gas. A pulse tube refrigerator generates refrigeration work with gas expansion by gas displacer in the pulse tube. The pulse tube is only filled with working gas and there exists secondary flow due to large temperature difference between cold-end and warm-end. The stability of secondary flow is affected by orientation of cold-head and thus cooling performance is deteriorated by gas mixing due to secondary flow. In this study, a single stage GM-type pulse tube with orifice valve as a phase control device is fabricated and tested. The fabricated pulse tube refrigerator is tested with two different working gases of helium and neon. First, optimal valve opening and operating frequency are determined with experimental results of no-load test. And then, the variation of no-load temperature as orientation angle of cold-head is measured for two different working gases. Effect of orientation dependence of cold-head as working gas is discussed with experimental results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.348-351
• /
• 2009

In order to evaluate the performance of a grounding system against lightning or fault currents including high frequency components, the grounding impedance should be considered rather than its ground resistance. Recently, some researches on the evaluation and modeling of the grounding impedances have been carried out but the results have not been yet sufficient. This paper deals with the frequency dependence of the resistivity and relative dielectric constant of sand associated with water contents. As a result, the resistivity of sand is getting lower with increasing water content and it is nearly independent on the frequency in the range of less than 1MHz, and is decreased over the frequency range of above 1MHz. Also, the relative dielectric constant is rapidly decreased with the frequency in the range of less than 10kHz, but it is nearly not dependent on the frequency over the frequency range of 10kHz. It was found from this work that the frequency dependance of resistivity and relative dielectric constant of soil should be considered in designing the grounding systems for protection against lightning or surges.