• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.39-44
• /
• 2013

In this paper, a Relaxation Oscillator with temperature compensation using BGR and ADC is presented. The current to determine the frequency of Relaxation Oscillator can be controlled. By adjusting the current according to the temperature using the code that is output from the ADC and BGR, was to compensate the output frequency of the temperature. It is fabricated in a 0.35 ${\mu}m$ CMOS process with an active area of $240{\mu}m{\times}210{\mu}m$. Current consumption is 600 ${\mu}A$ from a 5 V and the rate of change of the output frequency with temperature shows about ${\pm}1%$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.773-777
• /
• 1998

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1 ~ 2[㎓] and temperature range of 25~ 85[>$^{\circ}C$]. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals through these lines. The loss factor of glass-epoxy and teflon could by calculated with the measured dielectric constant and the attenuation. From the experiment, the glass-epoxy was more influenced by temperature and frequency than teflon. The average dielectric constants of glass-epoxy and teflon within the measured frequency range are 4.48 and 2.18, respectively.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.265-271
• /
• 2018

Background: Temperature-driven variation in pollinator assemblage and activity are important information, especially at high altitudes, where rising temperature trends exceed global levels. Temporal patterns of pollinators in a flowering season can be used as a proxy to predict the changes of high-altitude plants' mutualistic relationships. We observed a spring temperature change in one population of a high-altitude endemic species, Megaleranthis saniculifolia on Mt. Sobaeksan, and related it to pollinator assemblage and activity changes. Methods: This study was conducted at two sites, each facing different slopes (NE and NW), for two times in the spring of 2013 (early-flowering, April 27-28, vs. mid-flowering, May 7-8, 2013). We confirmed that the two sites were comparable in snowmelt regime, composition of flowering plants, and flower density, which could affect pollinator assemblage and activity. Pollinator assemblage and activity were investigated at three quadrats ($1m^2$ with 5-m distance) for each site, covering a total of 840 min observation for each site. We analyzed correlations between the temperature and visitation frequency. Results: Twelve pollinator species belonging to four orders were observed for M. saniculifolia at both sites during early- and mid-flowering times. Diptera (five species) and hymenopteran species (four species) were the most abundant pollinators. Pollinator richness increased at both sites toward the mid-flowering time [early vs. mid = 7 (NE) and 3 (NW) vs. 9 (NE) and 5 (NW)]. Compared to the early-flowering time, visitation frequency showed a fourfold increase in the mid-flowering time. With the progression of spring, major pollinators changed from flies to bees. Upon using data pooled over both sites and flowering times, hourly visitation frequency was strongly positively correlated with hourly mean air temperature. Conclusions: The spring temperature change over a relatively brief flowering period of M. saniculifolia at high altitudes can alter pollinator assemblages through pollinator dominance and visitation frequency changes. Thus, this study emphasizes information on intra- and inter-annual variations in the mutualistic relationship between pollinators and M. saniculifolia to further assess the warming impacts on M. saniculifolia's reproductive fitness.

• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.289-292
• /
• 2007

Although piezoelectric bimorph that is using as the sensor in medical and industrial measurement has large displacement, it has problems including efficiency in generating force, energy convergence, and response. Its application is being limited based on the change in resonance frequency with temperature. In this study, to overcome the disadvantages, PZT piezoelectric ceramics was prepared and produced a parallel type piezoelectric bimorphs. In addition, by using the finite element method. the configuration of piezoelectric bimorph was designed and the displacement of the bimorph based on applied electric pressure and the wave pattern were measured. By analyzing the resonance characteristics of the bimorph in the temperature range of $-60{\sim}80^{\circ}C$, an attempt was made to study the operational characteristics and temperature reliability of vortex flowmeter sensor. As a result, the resonance frequency of the bimorph was gradually increased with the temperature from $-60{\sim}80^{\circ}C$. The deflection of the bimorph was found to strongly depend on both the applied electric field waveform and the environmental temperature.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1102-1104
• /
• 1995

This study presents the results of an investigation on the electrical characteristics of $PVF_2$ film, to be regarded as the excellent piezo and pyroelectricity, using dielectric relaxation technique by the variation of temperature and frequency. As one of the results, we confirmed that crystal form with Infrared absorption and XRD was ${\alpha}$ type and its crystalline was 59[%]. Also, the results of observation conformed to Debye theory for frequency variation of relative permitivity and dielectric relaxation. Especially, we confirmed each constant values in comparision with equation related to diffusion behavior of ion, so we obtained that activation energy was computed 17.25[kcal/mole] from the relation curve with frequency and temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.147-151
• /
• 1994

In order to investigate the dielectric characteristic insulating oil is chosen insulating oil for electric cable, and experiment is performed in the temperature range of 30∼120[$^{\circ}C$] and frequency range of 30∼1${\times}$10$\^$6/[㎐]. As a result, the observed linear decrease in tan $\delta$ value at the low frequency range is due to the influence of frequency, whereas the increase in tan $\delta$ value at high frequency range is contributed by the electrode's resistance and dielectric loss. The dipole moment and activation energy of specimen are obtained 1.22(debye) and 12.75∼18.66[㎉/㏖e] of high temperature region, 15.68 ∼ 20.6[㎉/㏖e] of low temperature region respectively.

• Wind and Structures
• /
• v.25 no.4
• /
• pp.381-395
• /
• 2017

Nonlinear vibration and instability of cylindrical shell conveying fluid-nanoparticles mixture flow are studied in this article. The surrounding elastic medium is modeled by Pasternak foundation. Mixture rule is used for obtaining the effective viscosity and density of the fluid-nanoparticles mixture flow. The material properties of the elastic medium and cylindrical shell are assumed temperature-dependent. Employing first order shear deformation theory (FSDT), the motion equations are derived using energy method and Hamilton's principal. Differential quadrature method (DQM) is used for obtaining the frequency and critical fluid velocity. The effects of different parameters such as volume percent of nanoparticles, boundary conditions, geometrical parameters of cylindrical shell, temperature change, elastic foundation and fluid velocity are shown on the frequency and critical fluid velocity of the structure. Results show that with increasing volume percent of nanoparticles in the fluid, the frequency and critical fluid velocity will be increases.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.36-49
• /
• 2011

This paper aims to investigate the frequency and intensity variations of Okhotsk high pressure system focused on the Korean Peninsula. Weather chart (00UTC), daily weather data and reanalysis data were used. The first occurrence date of Okhotsk high pressure system tends to be earlier in those years that surrounding land air temperature in April is high. The frequency of Okhotsk high has recently decreased, and its intensity tends to be stronger when the difference between sea surface temperature and surrounding land air temperature is big. The frequency of Okhotsk high in April, May, June and July increases when surrounding land air temperature is high, and its intensity grows when the difference between surrounding land air temperature and sea surface temperature is big. The frequency of Okhotsk high may increase and its intensity may increase when the first occurrence date comes earlier. In June, however, the reverse may apply.

• The Journal of Korean Physical Therapy
• /
• v.17 no.2
• /
• pp.88-106
• /
• 2005

AMF(amplitude modulated frequency) is defined as currents in the frequency range 1 to 100Hz. The aim of this study was to determine the effects of blood flow and skin temperature according to different stimulating frequency($1{\sim}30Hz,\;30{\sim}50Hz,\;50{\sim}100Hz$) of interferential currents. The results were as follow; 1. There were statistical significance on the blood flow with IFC 1, IFC 2, and IFC 3 group, and inter-groups(p<0.05). 2. There were statistical significance on the skin temperature with IFC 1 and IFC 3 group, and inter-groups(p<0.05). 3. IFC 1 was more statistical significance than IFC 3 group on blood flow(pP<0.05) 4. There was no statistical significance between IFC 1 and IFC 3 group on skin temperature(p>0.05).

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.495-500
• /
• 1989

The ionic conductivity of polycrystalline, glass, and glass-ceramic silicates was measured using two-terminal AC method with blocking electrode over a frequency range of 100 Hz to 100 KHz in the temperature range of $200^{\circ}C$ to $320^{\circ}C$. Analysing the capacitance (C), susceptance (B), impedance (Z), and conductance (G) under the given conditions, an equivalent circuit containing temperature and frequency dependent component is proposed. Higher capacitance could be observed in the low frequency region and on the improved ionic migration conditions i.e., at higher temperature in a better ionic conductor. Also the electrode polarization built up at the electrode-specimen interface could be sorted out above 10 KHz. However, grain boundary contribution couldn't be extracted from the bulk resistance over the frequency range measured here.