• 한국수자원학회논문집
• /
• 제41권7호
• /
• pp.711-723
• /
• 2008

본 연구에서는 수문변화 지표법을 적용하여 11개 주요 다목적댐의 월 유량 크기, 연 최소.최대유량 크기와 지속기간, 고.저맥파 빈도와 주기, 수문곡선 변화 비율과 빈도를 분석하였다. 월 유량변화 분석 결과, 갈수기에 해당하는 1월부터 6월과 10월부터 12월까지는 유입량이 $6.38m^3/sec{\sim}39.84m^3/sec$이었으나, 방류량은 $20.36m^3/sec{\sim}49.43m^3/sec$로 $1.84%{\sim}200.98%$가 증가하였다. 우기철인 7월부터 9월까지는 유입량이 $79.06m^3/sec{\sim}137.12m^3/sec$ 이었으나, 방류량은 $65.32m^3/sec{\sim}80.16m^3/sec$로 $18.19%{\sim}40.39%$가 감소하였다. 연 최소.최대 유량변화 분석 결과는 1일 최소유량이 $82.86%{\sim}2,950%$가 증가하였으며, 연 최소 및 최대 유량변화는 1일 최소유량은 $82.86%{\sim}2,950%$가 증가하였으나, 1일 최대유량은 $34.78%{\sim}83.96%$가 감소하였다. 고.저맥파의 빈도와 주기의 분석 결과, 저맥파의 발생 횟수는 댐 조절후 $29.67%{\sim}99.07%$가 감소하였으며, 고맥파의 발생횟수도 $4.6%{\sim}92.35%$가 감소하였다. 수문곡선 변화 비율과 빈도의 분석 결과 상승률은 $15.84%{\sim}79.31%$가 감소하였으며, 하강율은 $1.97%{\sim}107.10%$가 감소하였다. 유량변화정도 분석 결과는 1일 최소유량은 $0.60{\sim}2.67$ 증가하였으며, 1일 최대 유량은 $0.50{\sim}1.00$으로 감소하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.3-11
• /
• 1998

Response of tall buildings to near-field ground motions with distinct low-frequency pulses can differ dramatically from, for example, the response to the 1940 El Centro ground motion. For the same peak ground acceleration (PGA) and duration of shaking, ground motions with a pulse-like characteristic can generate much higher base shear, inter-story drifts and roof displacement in a high-rise building as compared to ground motions without the characteristic pulse. Also, the ductility demand is much higher and the effectiveness of supplemental damping is lower for pulse-like ground motions. This paper presents a simple interpretation of the response characteristics for two recorded and one synthetic near-field pulse-like ground motions.

• 한국수자원학회논문집
• /
• 제41권2호
• /
• pp.163-172
• /
• 2008

하천의 유황특성을 평가 하는 것은 하천생태계의 인위적인 변형을 이해하고 예측하는데 중요한 역할을 한다. 본 연구에서는 댐 건설에 따른 하류하천의 영향을 분석하고자 수문변화 지표모형을 이용하여 용수 전용댐인 영천댐을 대상으로 댐 건설전 후의 유황변동을 분석하였다. 분석결과는 다음과 같다. (1) 월 평균유량은 갈수기와 홍수기 모두 댐건설 후 감소하였다. (2) 연 극치유량의 크기와 기간 분석결과, 댐 건설전 후의 1일 최소유량은 $3.48m^3/sec$와 $0.89m^3/sec$ 이였으며, 1일 최대유량은 $833.1m^3/sec$와 $672.1m^3/sec$ 이었다. (3) 연극치 유량의 발생시기 분석결과, 최소유량의 Julian Day는 댐 건설전 180 일(6월), 댐 건설 후 257 일(9월)이었으며, 최대유량의 Julian Day는 댐 건설 전 209 일(7월), 댐 건설 후는 217 일(8월)에 발생하였다. (4) 홍수맥파의 빈도와 기간의 분석결과, 저맥파(Low Pulse)의 발생횟수는 댐 건설전 3회, 지속기간은 23 일, 댐 건설 후에는 7회, 지속기간 61 일이었으며, 고맥파(High Pulse)의 발생횟수는 댐 건설 전 4회 지속기간은 2 일, 댐 건설후에는 2회 1.2 일로 분석되었다. (5) 변화율과 빈도의 분석결과, 상승율은 댐 건설 전, 후의 각각 39.27 %와 19.36 %로 댐 건설 전에 수문변동이 크게 발생하였으며, 감소율은 각각 -15.85 %와 -8.16 %로 분석되었다. (6) 분산정도를 변동계수로 분석하였으며, 1일 최소 최대유량은 0.9054에서 0.6314와 1.0440에서 0.9617로 모두 감소하였으며, 연 극치유량 발생시기는 댐 건설전 후 최소유량은 0.269에서 0.282, 최대유량은 0.069에서 0.153으로 댐건설이후 변동계수가 증가하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1400-1404
• /
• 2005

This paper presents the temperature control of aluminum plate by using Peltier element. Peltier effect is heat pumping phenomena by electric energy as one of the thermoelectric effect. So if current is charged to Peltier element, it absorbs heat from low temperature side and emits heat to high temperature side. In this experiment, Peltier element is used to control the temperature of small aluminum plate with current control and operating cooling fan only while cooling duration. Operating cooling fan only while cooling duration is proper to get more rapid heating and cooling duration. As a result of experiment, it takes about 100sec period to repeating temperature between $35^{\circ}C$ and $70^{\circ}C$ and about 80sec from $40^{\circ}C$ to $70^{\circ}C$ in ambient air temperature $25^{\circ}C$ and while operating cooling fan only in cooling duration. Future aim is to apply this temperature control method in actuating SMHA(special metal hydride actuator) which is applicable in Siver project acting in low frequency range by using Peltier element for heating and cooling.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.60-67
• /
• 2005

Compared with conventional welding, laser spot welding offers a unique combination of high speed, precision and low heat distortion. This combination of advantages is attractive for manufacturing industries including automotive and electronics companies. In this paper, a real time monitoring scheme fur a pulsed Nd:YAG laser spot welding was suggested. Acoustic emission (AE) signals were collected during welding and analyzed for given process conditions such as laser power and pulse duration. A back propagation artificial neural network, with AE frequency content inputs, was used to predict the weldability of stainless steel sheets.

• 대한한방부인과학회지
• /
• 제31권1호
• /
• pp.57-83
• /
• 2018

Purpose: This research has been carried out to find out correlation between test results of ABR-2000 and other diagnostic equipments to enhance significance of accurate diagnosis and clinical usage of ABR-2000. Methods: Duration of the 31 months from December 2012 to June 2015, records of 564 outpatients at gynecology department have been selected. The 564 patients were tested, using all 3 different test equipments of ABR-2000, DSOM, and 3D Blood Pressure Pulse Analyzer (3D-MAC) without test errors or mis-recordings. Correlation between 3D Blood pressure Pulse Analyzer, DSOM and ABR-2000 were analyzed by frequency & ratio factor of statistic data records of patients groups devided by 8 different disease symptom and by comparison of the groups in the form of Regulation and Graph presented on ABR-2000 equipment. Results: 1. The indicator L in all 1, 2, and 3 quadrant in the graph means the activity and reactivity of the upper body biodynamics detection rate is low and which result is very common symptom among gynecological patients. 2. The portion of patients with hypermenorrhea, endometritis, and menstrual pain symptom among the indicator L group in the reactivity 1-3 quadrantin is significantly high. 3. When 3D Mac analyzer indicates H, diastole decreases while systole increases and tachycardia increases then the blood circulation is expected to increase. In case of indication L, diastole increases and systole decreases then, the blood circulation is expected to decrease.

• Journal of Acupuncture Research
• /
• 제17권2호
• /
• pp.209-220
• /
• 2000

Spasticity, an abnormal increase in resting muscle tone, is one of the most common symptoms of stroke, and its management is becoming a major issue in rehabilitation. The aims of this study are to determine the effects of electroacupuncture(EA), TENS and neuromuscular electric stimulation(NMES) on spasticity, as well as the possibility of tissue comliance method as a spasticity scale. 45 stroke patients participated in a study of the effects on hemiplegic spasticity of EA, TENS and NMES. Spasticity was measured by modified Ashworth scale on the upper extremity and tissue compliance measurement, penetration mm/kg, on Susamni(LI10) area at just before and after stimulation, and 30 minutes, 1 hour, 2 hours and 24 hours after stimulation. The acupuncture points were applied to Kokchi(LI11), Susamni(LI10), Hapkok(LI4) and Oegwan(TE5) of the affected limb. The electrodes were placed unilaterally on LI11 to LI10 and TE5 to LI4. EA with biphasic wave, 60Hz, 0.4 msec pulse duration and low intensity was applied continuously for 20 minutes. TENS with high frequency, low intensity was applied. NMES was applied with spasticity program for 20 minutes. Each electric stimulation was done on extensor muscles group of forearm for 20 minutes. EA and NMES groups were found to produce a statistically significant decrease(p〈0.05) of spasticity and these effects lasted up to 30 minutes after stimulation. There was no definite correlation between the modified Ashworth scale and tissue compliance measurement. But tissure compliance method was found to be possible as a quantitative measurement on spasticity. There was no significant correlation between the effects of EA and NMES and the characteristics of patient, but significant correlation between the effects of EA and NMES and the modified Ashworth scale.