• 한국항공우주학회지
• /
• 제32권3호
• /
• pp.30-36
• /
• 2004

장섬유 복합재료는 항공우주 구조물, 로봇 팔 등의 구조물에 광범위하게 적용되고 있으며, 복합재료의 비파괴 검사방법에 대한 연구는 구조의 안전성과 신뢰성을 향상시키기 위하여 매우 중요한 연구 분야로 대두되고 있다. 본 논문에서는 AE 선호의 특정주파수 성분을 추출할 수 있는 풍조회로를 가진 AE 신호 분석 장비를 설계, 제작하였다. 제작된 AE 신호 분석 장비에 충격이나 기계적 진동 등과 같은 외란을 가하였을 때 제작된 AE 신호 분석 장비의 잡음레벨은 상용 AE 신호 분석 장비의 잡음레벨보다 매우 낮은 값을 나타내었다. 또한 복합재료 시편의 정, 동적 인장시험 하에서 제작된 AE 분석 장비는 상용 장비와 통일한 수준의 복합재료 파손감지능력을 나타냄을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.661-670
• /
• 2013

본 논문에서는 고정 주파수 신호와 선형 주파수 변조 신호가 혼합된 연속 위상을 갖는 주기성 혼합 파형에 대한 선형 주파수 변조 파형의 측정 기법을 제시한다. 다양한 신호 파형을 생성하는 주파수 합성기와 송신 신호를 고출력으로 증폭하는 고출력 증폭기로 구성된 소형 레이더 송신기는 연속 위상을 갖는 혼합 파형을 생성한 다. 첫 번째로 위상이 연속적인 신호를 갖는 소형 레이더 송신기의 구성을 요약하고, 선형 주파수 변조 파형의 비정합에 의한 펄스 압축의 왜곡 특성을 고찰한다. 두 번째로 연속 위상을 갖는 혼합 파형에서 선형 주파수 변조 파형을 측정하기 위해 스펙트럼 분석기를 사용한 측정 기법, 신호원 분석기를 사용한 측정 기법 및 RF 혼합기와 위상 변위기를 사용한 새로운 측정 기법을 기술한다. 마지막으로 측정 결과를 적용한 송신 펄스 파형에 대한 수신 신호의 펄스 압축 결과로부터 측정 기법의 정확도를 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1738-1740
• /
• 1996

Laser Doppler Vibrometer using heterodyne method with a 632.8 nm He-Ne laser, has been developed for the measurement of small displacement and velocity. The measurement uses heterodyne method can be made insensitive to undesired vibration effect acting the system and can yield the sign of Doppler shift at the expense of increased complexity. A Bragg cell gives a frequency shift of 40MHz for heterodyne method. Frequency Modulated output is detected by spectrum analyzer.

• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.40-44
• /
• 1997

This paper presents the results of studies made for measuring the relative complex permittivity of PCB sheet material in he frequency a range of 100MHz∼1GHz using vector network analyzer. A measurement cell was developed for this purpose using broad-band impedance method and the dielectric constant and loss tangent of two PCBV sheet materials, glass-epoxy and teflon, were measured. The effect of copper cladding was studied.

• 전기의세계
• /
• 제19권6호
• /
• pp.8-12
• /
• 1970

A Device is described which intensity modulates a light beam at modulating frequency in the M/W region. A Method of designing a practical crystalline microwave-Freg. light modulator has been described. In addition, Electrooptic properties and operation as light modulator of NH$_{4}$H$_{2}$po$_{4}$ is described. A light path is provided through the crystal into a suitably oriented analyzer. The intensity of the light beam emerging from the latter varies at the same rate as the cavity frequency.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권11호
• /
• pp.512-515
• /
• 2003

This paper is to investigate how partial discharge pulse signal can flow in 6.6㎸ motor stator windings. Pulse propagation is experimentally analyzed in stator windings using a variety of frequency-domain techniques. The experiments were performed on two stator windings in the laboratory. Spectrum analyzer(9KHz to 3㎓) with tracking generator(100kHz to 3㎓) was used. Sweep time of the tracking generator was looms. The frequency spectrum of the response signal was detected by active FET probe(1㎓). The active FET probe has a flat amplitude response up to 1㎓ without high frequency attenuation. The stator winding acts as a low-pass filter below 600KHz, the high-frequency components being highly declined. The resonance peaks show about 1.1MHz and 2MHz in low frequency of No. 1 and No. 2 stator windings, respectively. This low-frequency range indicates that attenuation is low. The peaks of partial discharge magnitude show about 900MHz, 1.6MHz in No. 1 stator winding and about 800KHz, 1.4MHz in No. 2 stator winding.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.108-117
• /
• 2004

In this paper, a measuring NDT(nondestructive testing) system using RUS(Resonant Ultrasound Spectroscopy) was built for nondestructive evaluation of the flaw in a ceramic Ferrule. The principle of RUS is that the mechanical resonant frequency of the materials depends on density, and the coefficient of elasticity. The RUS system is the measuring which is to exite specimen and to inspect the difference of natural frequency pattern between acceptable specimen and specimen which has some defects. RUS system is configured of spectrum analyzer, power amplifier, PZT sensor and support frame. For defect evaluation by the RUS, we performed to measure natural frequency of Ferrule, both acceptable and cracked. In the case of Ferrule, the resonant frequency of cracked-Ferrule existed to higher frequency band than acceptable-Ferrule.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1061-1067
• /
• 2005

The resonant frequency modulation of $YBa_2Cu_3O_{7-x}$ meander lines has been investigated as functions of optical pulse energy and temperature by using a network analyzer. The frequency-domain measurements are performed by controlling both the resonant frequency and the frequency width. The meander lines, configured in a microstrip geometry, are illuminated by optical pulses from an actively mode-locked Nd:YAG laser. The variation of the resonant frequency shows a quadratic dependence on the reduced optical pulse energy $P/P_c$, where $P_c$ is defined as the critical optical pulse energy at which resonance signal has disappeared. As for the dependence on temperature, the results are in good agreement with the previously reported data.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 창립 20주년기념 특별학술발표회
• /
• pp.121-122
• /
• 2009

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.25-28
• /
• 1996