• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권11호
• /
• pp.501-507
• /
• 2003

In this study, microscale, high-performance, solenoid-type RF chip inductors were investigated. The size of the RF chip inductors fabricated in this work was 1.0${\times}$0.5${\times}$0.5㎣. 96% $Al_2$ $O_3$and I-type were used as the material and shape of the core, respectively. The copper (Cu) wire with 6 turns was employed as the coils. The diameter (40${\mu}{\textrm}{m}$) and position (middle) of the coil and the length (0.35mm) of solenoid were determined by a high-frequency structure simulator (HFSS) to maximize the performance of the inductors. High frequency characteristics of the inductance (L) and quality-factor (Q) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). The inductors developed have inductances of 10.8nH and quality factors of 25.2 to 50 over the frequency ranges of 250MHz to l GHz, and show results comparable to those measured for the inductors prepared by CoilCraf $t^{Tm}$ . The simulated data predicted the high-frequency data of the L and Q of the inductors developed well.l.

• 소음진동
• /
• 제8권3호
• /
• pp.494-503
• /
• 1998

In this paper, in order to analyze dynamic characteristics of an automobile steering system consisting of many components, natural frequencies and transfer functions of each component and the total system are found on a FFT analyzer by experiments. Then, the data are transmitted to a commercial package program, CADA-PC. By analyzing the data, the mode shape of each natural frequency and damping values are obtained. Also, the function of a rubber coupling in column and telescoping effects on system are considered. C.A.E commercial programs are used to compare with the results of experiments. For the finite element modeling, I-DEAS is used. Data processing and post processing are operated on NASTRAN and XL, respectively. The ball-bearing and the linkage of shaft with column are modeled by spring element. Stiffness is modified from the results of experiments. The results of those show close agreement. In the mode shape of total system, wheel mode is dominant at lower frequency, while the column mode is main mode at higher. The role of rubber coupling in vibration isolation is clear on mode shape. Telescoping function makes natural frequency of column changed.

• 조명전기설비학회논문지
• /
• 제17권2호
• /
• pp.81-87
• /
• 2003

본 논문은 공기중 침대 평판 전극계를 이용하여 방전진전 과정과 부분방전을 모의하였다. 이 때 방전진전과정에 따른 방사전자파를 biconical 안테나와 스펙트럼 분석기를 이용하여 주파수 스펙트럼 분포를 분석 연구하였다. 본 연구의 결과로부터 공기중 교류방전 진전에 따른 방사전자파의 측정과 분석에 의한 절연진단을 위한 방법을 제시하였고 또한 방전진전과정과 방사전자파를 상호관계를 고려하면 부분방전의 검출과 방전진전과정의 평가가 가능함을 확인하였다

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권11호
• /
• pp.555-561
• /
• 2001

In this paper, the low power (1.5 W) solenoid-type magnetic thin-film transformers utilizing a $Ni_{81}Fe_{19)$ core material were designed and fabricated for 5 MHz-drive DC-DC converter application. The $20\mum$ thick copper films were used as the coils. The transformers fabricated in this work have the sizes of $3.08 mm\times25.5 mm\; and\; 6.15 mm\times12.75 mm.$ The optimum design of solenoid-type magnetic thin film transformers was performed utilizing the conventional equations, a Maxwell computer simulator (Ansoft HFSS V7.0 for PC), and parameters obtained from the magnetic properties of NiFe magnetic core materials. frequency characteristics of inductance, dc resistance (R), coupling factor (k) and gain of developed transformers were measured using HP4194A impedance and gain-phase analyzer. The fabricated transformers with the size of $6.15 mm\time12.75 mm$ exhibit the inductance of $0.83 \muH$, the dc resistance of $2.3\Omega$$\Omega$, the k of 0.91 and the gain of -1 dB at 5 MHz, which show the comparable results to those reported in the recent literatures. The measured high-frequency characteristics for the fabricated transformers agreed well with those obtained by theoretical calculations .

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.429-433
• /
• 2014

This study investigated the magnetic properties and frequency dispersion of complex permeability of Ni-Zn-Co ferrites used for magnetic shielding in near field communication (NFC) system. The sintered specimens of $(Ni_{0.7}Zn_{0.3})_{1-x}Co_xFe_2O_4$ composition were prepared by the conventional ceramic processing. The coercive force and saturation magnetization were measured by vibrating sample magnetometer. The complex permeability was measured by RF impedance analyzer in the range of 1 MHz~1.8 GHz. The coercive force increased and saturation magnetization decreased with increasing the Co substitution. The real and imaginary parts of complex permeability decreased and the resonance frequency increased with Co substitution, which was attributed to the increase in crystal anisotropy field and reduction in saturation magnetization. The effect of Co substitution could be found in reducing the magnetic loss to nearly zero at the operating frequency of NFC (13.56 MHz).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.184-184
• /
• 2012

We proposed a new measurement method of cutoff probe using the reactance spectrum of the plasma in cutoff probe system instead of transmission spectrum. The high accurate reactance spectrum of the plasma which is expected in previous circuit simulation of cutoff probe [1] was measured by using the automatic port extension method of the network analyzer. The measured reactance spectrum is good agreement with E/M wave simulation result (CST Microwave Studio). From the analysis of the measured reactance spectrum based on the circuit modeling, not only the electron density but also electron-neutral collision frequency can be simply obtained. The obtained results of electron density and e-n collision frequency were presented and discussed in wide range of experimental conditions, together with comparison result with previous methods (a previous cutoff probe using transmission spectrum and a single langmuir probe).

• 한국컴퓨터정보학회논문지
• /
• 제13권3호
• /
• pp.27-33
• /
• 2008

본 논문에서는 한국어 형태소 분석의 성능향상을 위해서, 어절에서 미등록어를 인식하여 자동으로 사전을 구축하는 방법을 제안한다. 제안하는 사전 구축 방법은 전문 분석 기반 사전 구축 방법과 웹 출현빈도 기반 사전 구축방법으로 구성되어 있다. 전문 분석 기반사전 구축 방법은 전체 문서에서 반복적으로 나타나는 문자열을 미등록어로 인식하고, 웹 출현빈도 기반사전 구축 방법은 반복되지 않은 문자열을 웹 문서에서 검색하여 그 출현빈도를 바탕으로 미등록어를 인식한다. 실험결과 전문 분석만을 바탕으로 하는 기존 접근방법에 비해서 웹 문서에서의 출현빈도도 함께 고려하여 제안하는 사전 구축 방법은 32.39% 정도 재현율이 높게 나타났다.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1003-1008
• /
• 2017

본 논문에서는 5GHz 대역의 이중 T 구조를 갖는 CPW 안테나를 연구하였다. 안테나에 대한 주파수와 반사손실에 관한 파라미터 특성을 HFSS(: High Frequency Structure Simulator)를 통해 분석하고 이것을 이용하여 안테나를 설계하였다. 시뮬레이션 결과를 바탕으로 5GHz 대역에서 사용 가능한 이중 T 구조 CPW 안테나를 설계하고, 설계 된 안테나를 유전율 4.4, 두께 0.8mm인 FR4-epoxy 기판을 사용 하여 포토리소그래피 방법으로 안테나를 제작하였다. 제작된 안테나는 최종적으로 회로망 분석기(Network Analyzer)를 통해 안테나 특성을 분석하였다. 제작된 CPW 이중 T 구조 안테나는 중심주파수 5.29GHz, 입력반사손실 -34dB, 임피던스 $49.6{\Omega}$의 결과 값을 보였다.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• 한국음향학회지
• /
• 제26권6호
• /
• pp.276-285
• /
• 2007

본 논문에서는 현재까지 주파수 영역에서 개발된 4종류의 라우드스피커 TS 매개변수 규명법들에 대하여 비교 검토하였다. 보이스 코일 인덕터에 대한 상세한 모델링을 위해 주파수 종속 모델링 기법을 소개하였고 관련된 매개변수들을 유도하였다. 라우드스피커의 동적 질량을 알고 있을 때에 TS 매개변수를 규명하는 방법을 소개하고 이를 실제 라우드스피커에 적용할 때에 고려할 사항들도 기술하였다. 1채널 장비로 전기 임피던스를 측정할 때에는 크기만을 측정하게 되므로 위상값 추정을 위해 최소 위상 변환법을 사용하는 방법도 기술하였다.