• 한국전자파학회논문지
• /
• 제22권12호
• /
• pp.1180-1183
• /
• 2011

본 논문에서는 단위-셀 EM 시뮬레이션 기법을 통해 주파수 선택적 전파투과막(FSS: Frequency Selective Surface)을 갖는 AEM(Advanced Enclosed Mast) 레이돔을 설계하고, $16{\times}16$ 배열안테나 방사 패턴 시험을 통해 레이돔의 성능을 검증하였다. 측정한 결과, 평면파 입사 조건을 가정한 시뮬레이션 결과와 원전계 및 근전계 조건에 레이돔을 두고 시험한 결과가 서로 잘 일치하는 결과를 확인하였다. 이 결과들을 통해 검증된 AEM형 FSS 레이돔을 활용하여 기존 마스트 대비 안테나의 RCS를 줄이는 것이 가능할 것이다.

• Composites Research
• /
• 제30권5호
• /
• pp.273-279
• /
• 2017

This paper describes the fabrication techniques and analysis of hybrid composite plates with an active frequency selective surface (FSS). For fabricating hybrid composite plate with active FSS, an active FSS with a resonance frequency located in the C band can obtained using varactor diodes. The hybrid composite plate was first designed and simulated to determine its electromagnetic properties using the commercial software HFSS. After simulation, active FSSs and hybrid composite plates were fabricated by mounting with varactor diodes. After fabrication, free space measurement was used to determine the electromagnetic properties of active FSS and the hybrid composite plates. The simulation and experimental results were in good agreement.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.673-678
• /
• 2015

Terahertz dual-band frequency selective surface filters made by perforating two different rectangular holes in molybdenum have been designed, fabricated and measured. Physical mechanisms of the dual-band resonant responses are clarified by three differently configured filters and the electric field distribution diagrams. The design process is straightforward and simple according to the physical concept and some formulas. Due to the weak coupling between the two neighboring rectangle holes with different sizes in the unit cell, good dual-band frequency selectivity performance can be easily achieved both in the lower and higher bands by tuning dimensions of the two rectangular holes. Three samples are fabricated, and their dual-band characteristics have been demonstrated by a THz time-domain spectroscopy system. Different from most commonly used metal-dielectric structure or metal-dielectric-metal sandwiched filters, the designed dual-band filters have advantages of easy fabrication and low cost, the encouraging results afforded by these filters could find their applications in dual-band sensors, THz communication systems and other emerging THz technologies.

• 한국전산구조공학회논문집
• /
• 제26권6호
• /
• pp.475-481
• /
• 2013

복합재료 사이에 주파수 선택적 투과막(Frequency Selective Surface)을 삽입하여 동시경화 공정을 이용하여 주파수 선택적 투과 기능을 가지는 하이브리드 복합재료를 성형하면 재료들 간의 열팽창 계수와 강성의 차이로 인해 구조 내에 잔류 열응력이 발생하게 되고, 이로 인하여 스프링 백 현상이 발생한다. 따라서 복합재의 적층에 따른 영향을 알아보기 위해 복합재료의 적층각을 선택적 투과막(Frequency Selective Surface)을 중심으로 대칭과 비대칭 적층으로 적용하여 하이브리드 구조의 잔류 열응력을 예측하고, 이에 대한 스프링 백에 대해서 연구하였다.

• Journal of electromagnetic engineering and science
• /
• 제9권1호
• /
• pp.46-52
• /
• 2009

This paper conducts a study on the frequency-dependent filtering and blocking effects of a variety of periodic structures, dubbed frequency selective surface(FSS). The periodic structures of interest are 1D and 2D repeated patterns of metal patches or slots sitting on the interface between the two different regions in the layered media which will show the capacitive or inductive behaviors and incorporated with the electromagnetic bandgap(EBG) geometry as another stratified media. Besides the normal substances so called double positive(DPS)-type in the layered media, metamaterials of double negative(DNG) are considered as layering components on the purpose of investigating the unusual electromagnetic phenomena. Frequency responses of transmission(absorption in terms of scattering) and reflection will be calculated by a numerical analysis which can be validated by the comparison with the open literature and demonstrated for the periodic structures embedding metamaterials or not. Most importantly, numerous examples of FSS will present the useful guidelines to have absorption or reflection properties in the frequency domain.

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.92-98
• /
• 2014

본 논문에서는 패치 배열과 그리드 구조를 응용하여 C-밴드인 7 GHz 대역에서 동작하는 재구성 주파수 선택 구조를 설계하였다. 본 논문에서 제안한 구조는 바랙터 다이오드를 이용하여 슬롯에서 발생하는 커패시턴스 변화로부터 주파수 재구성 특성을 얻었으며, 커패시턴스의 변화에 따른 투과 주파수의 변화를 구현하였다. 설계한 결과를 바탕으로 유연성을 갖는 FPCB(Flexible Printed Circuit Board)와 상용 바랙터 다이오드를 이용하여 재구성 주파수 선택 구조를 제작하고, 바이어스 전압의 변화에 따른 주파수 재구성 특성을 측정하였다. 제작된 재구성 주파수 선택 구조는 약 6.6~7.6 GHz의 광대역 주파수 재구성 특성(투과 주파수의 가변 범위)을 가지며, 본 논문에서 제안한 구조는 제한된 곡률에 대하여 유연성을 갖기 때문에, 항공기 또는 군함의 레이돔과 같은 곡면 형상 구조 중 완만한 곡면 구조에 적용이 용이하다.

• 한국전자파학회논문지
• /
• 제27권6호
• /
• pp.512-520
• /
• 2016

본 논문에서는 평면 위에 소형화된 단위구조의 반복 배열을 통해 입사파의 편파 및 입사각에 대하여 안정적인 주파수 특성을 갖는 대역 저지 동작 주파수 선택적 표면구조(FSS: Frequency Selective Surface)를 설계하였다. 제안된 소형화 FSS 구조는 삼각형의 루프가 반복되는 육각 형태 구조로 2.5 GHz 동작주파수에서 $0.081{\lambda}{\times}0.081{\lambda}$의 단위셀 크기를 가지며, 매우 안정적인 입사각 및 편파 주파수 응답 특성을 갖는다. 또한, 제안구조는 기존 소형화 기법의 단점인 높은 설계 복잡도를 개선하고, 단일 설계 변수의 조정을 통해 2~8 GHz 광대역에서 안정적인 주파수 응답 특성을 갖는 FSS 구조 설계가 가능함을 확인하였다. 제안된 구조의 검증을 위해 2.5 GHz, 5 GHz, 8.2 GHz 대역에서 동작하는 FSS 구조를 각각 설계 및 제작하였고, 측정 결과로부터 계산된 결과와 잘 일치함을 확인하였으며, 넓은 대역에 걸쳐 입사파의 편파와 입사각에 대하여 안정적인 성능을 가짐을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.86-91
• /
• 2010

In this paper, a double-layered frequency selective surface(FSS) superstrate was built and tested. The unit cell of the proposed FSS consists of a ring slot and a dipole-shaped structure and shows a complementary frequency response. Each unit cell is printed on two sides of a substrate. By using these double-layered structures, the first resonant frequency of the pass-band can be lowered. As a result, the size of the unit cell is minimized and the spacing between the other cells is reduced. The proposed FSS-dipole composite antenna is designed for the gain enhancement of wide-band code division multiple access(WCDMA) frequency bands(1.92~2.17 GHz) with a low quality factor(Q=0.17). To verify the gain enhancement performance of the FSS, an FSS-dipole composite antenna was created. Although the FSS layer enhances the gain of the primary radiation source of the dipole antenna, the FSS-dipole complex antenna cannot show a uniform gain over the entire desired frequency band. The experimental results show a gain enhancement of 3 dBi with an FSS superstrate in the WCDMA frequency band.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.7-14
• /
• 1997

A rigorous analysis method of electromagentic scattering from frequency selective surface with gridded square loop elements in case of oblique incident and arbitrary polarization is presented, which uses the roof-top subdomain basis function. The frequency response and polarization characteristics of the reflected wave and the transmitted wave for various widths of the grid and the conductor square loop, and for the various gaps between the grid and the conductor square loop, and for the various gaps between the grid and square loop is investigated. To confirm the validity of presented method, frequency selective surfaces with gridded square loop elements are fabricated with honeycomb structures, calculate dvalues for the frequency response of the reflected wave and the transmitted wave for arbitrary incident angle and polarization are compared with measured values.

• 한국군사과학기술학회지
• /
• 제15권6호
• /
• pp.779-785
• /
• 2012

In this paper, we have analyzed the curvature effects of the finite FSS(frequency selective surface) using the 3-D method of moment using the BiCGSTab algorithm as an iterative method. To validate the analysis method in this paper, we compared the RCS(radar cross section) of PEC(perfect electric conductor) sphere with theoretical results and it shows well agreements. The tripole slot FSSs which have many application in military were selected for the investigation of curvature effect and RCS as a frequency characteristics were observed with the variation of the curvature rate. Simulation results shows that curvature effect can significant effect the passband frequency and bandwidth of FSS. We suggest that the curvature effect must be considered at the stage of design FSS application like FSS radome.