• Title/Summary/Keyword: Frequency Quality

Search Result 4,708, Processing Time 0.032 seconds

A Study on Changes of the Annoyance Perception for Sound Quality Characteristics of the Traffic Noise (교통소음의 음질 특성에 따른 불쾌도 감성변화에 대한 연구)

  • Song, Chi-Mun;Hur, Deog-Jae;Jo, Kyoung-Sook;Hwang, Dae-Sun;Cho, Yeon
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.1272-1275
    • /
    • 2006
  • The A-weighting curve, very well explain the human perception for various frequency, is used to assess the traffic noise as well as the environmental noise. However, it does not reflect the annoyance perception appropriately because it assesses the noise at an A-weighted equivalent noise level of 1 kHz. In this study, we acquired the sound quality of traffic noise included various frequency and studied the human perception caused by change of frequency range.

  • PDF

A Single-Phase Unified Power Quality Conditioner with a Frequency-Adaptive Repetitive Controller

  • Phan, Dang-Minh;Lee, Hong-Hee
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.2
    • /
    • pp.790-799
    • /
    • 2018
  • This paper proposes a single-phase unified power quality conditioner (S-UPQC) for maintaining power quality issues in a microgrid. The S-UPQC can compensate the voltage and current harmonics, voltage sag, and swell as a dynamic voltage restorer (DVR), regardless of variations in the grid frequency. Odd harmonics are treated as even-order harmonics in a rotating frame to implement the harmonic compensators with only one repetitive controller (RC) without any harmonic extractor. The dynamic performance is improved and the delay time is reduced in the RC. The S-UPQC control scheme is designed to maintain accurate and stable operation under deviations of the grid frequency by using the Lagrange interpolation-based finite-impulse-response (LIFIR) filter approximation method. The proposed control schemes were validated through a simulation and experiment.

Analysis of Academic Evaluation Indicators Based on Citation Quality

  • Zhang, Mingyue;Shi, Jin;Wang, Jin;Liu, Chang
    • Journal of Information Processing Systems
    • /
    • v.14 no.4
    • /
    • pp.916-925
    • /
    • 2018
  • The academic research performance is often quantitatively measured by means of using citation frequency. The citation frequency-based indicators, such as h-index and impact factor, are commonly used reflecting the citation quality to some extent. However, these frequency-based indicators are usually carried out based on the assumption that all citations are equal. This may lead to biased evaluations in that, the attributes of the citing objects and cited objects are significant. A high-accuracy evaluation method is needed. In this paper, we review various citation quality-based evaluation indicators, and categorize them considering the algorithms being applied. We discuss the pros and cons of these indicators, and compare them from four dimensions. The outcomes will be useful for our further research on distinguishing citation quality.

Sharpness Measure Based on the Frequency Domain Information (주파수 도메인 정보를 이용한 영상의 Sharpness 평가 방법)

  • Choi, Hyun-Soo;Lee, Chul-Hee
    • Journal of Broadcast Engineering
    • /
    • v.16 no.3
    • /
    • pp.552-560
    • /
    • 2011
  • In this paper, a new no-reference sharpness measure using frequency domain coefficients is proposed. Although most existing sharpness measures used pixel intensity to compute the blur degree, the proposed sharpness measure computes the sharpness using frequency coefficients. To assess the perceived sharpness of a given image, the image is re-blurred by a Gaussian low pass filter and a new quality measure function was defined using the frequency domain coefficients of the given image and the re-blurred image. To evaluate the proposed algorithms, TID2008 quality assessment database was used. Experimental results show that the proposed quality assessment method showed high correlation with the subjective scores.

High Frequency Simulations for the Meander Type Inductors on the MgO and Al2O3 Substrates (산화마그네슘 기판과 산화알루미늄 기판을 이용한 Meander 형태 인덕터의 고주파 시뮬레이션)

  • Ham, Yong-Su;Kim, Sung-Hun;Kang, Ey-Goo;Koh, Jung-Hyuk
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.22 no.8
    • /
    • pp.641-644
    • /
    • 2009
  • We have studied on the microwave characteristics for the meander type inductors on the MgO substrates and $Al_2O_3$ substrates by employing 3-D high frequency simulation, respectively. Proper designs of meander type inductors were proposed and confirmed through the high frequency simulations, 5, 7, 9, 11, and 13 turns meander type inductors have been choose to analyze the electrical properties for the microwave passive component applications. The Al top electrodes have 282 nm length, 45 nm width, 100 nm thickness and 15 nm gap. The simulations were carried out from 50 MHz to 30 GHz, Frequency dependent inductances and quality factor were calculated by employing the equivalent circuit model of meander type inductors. The self resonances frequency of meander type inductor were shifted from high frequency to low frequency range as the number of the turn of inductors was increased. From the microwave simulations, the inductances and quality factors of meander type inductors were extracted through the scattering parameter.

Analysis of Anti-Islanding Schemes using Frequency Drift in Distributed Generation System (분산전원 시스템의 주파수 변동을 통한 단독운전 방지기법 분석)

  • Jo, Yeong-Min;Cho, Sang-Yoon;Song, Seung-Ho;Choy, Ick;Choi, Ju-Yeop;Lee, Young-Kwoun
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.20 no.3
    • /
    • pp.247-254
    • /
    • 2015
  • Unintentional islanding results in safety hazards, power quality degradation, and many other issues. Thus, islanding detection of grid-connected distributed generation system is a key function for standards compliance. Many anti-islanding schemes are currently being studied; however, existing anti-islanding schemes used in inverters have power quality degradation and non-detection zone issues. Therefore, this paper analyzes existing anti-islanding schemes by using frequency drift in accordance with both islanding detection performance and power quality. This paper also proposes a new anti-islanding scheme by using frequency drift. Both simulation and experimental results show that the proposed scheme has negligible power quality degradation and no non-detection zones compared with other existing schemes.

Effect of Harmonics and High-Frequency on OLEV System in Distribution Power System (온라인 전기자동차 시스템의 고조파 및 고주파가 배전계통에 미치는 영향에 관한 연구)

  • Choi, Seong-Ho;Huh, Jae-Sun;Han, Woon-Ki;Kim, Jae-Chul
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.63 no.6
    • /
    • pp.738-745
    • /
    • 2014
  • Recently, various measures have been discussed for overcoming depletion of fossil fuels and environmental pollution. One of the measures is electric vehicles. But electric vehicles has some limitations from high cost of battery and low efficiency, so operation distance of electric cars is limited. Also there are difficulties that charging lines should be connected by an electric car whenever it charges. Thus, many studies have been conducted to overcome the limitation using conventional batteries of electric vehicles. As a result, the OLEV(On-Line Electric Vehicle) was developed. But the OLEV system is some limitations. The OLEV system causes power quality problems when it charges. Power quality problem cannot be ignored because OLEV systems are closely connected by distribution grids. In this paper, the OLEV system is designed by using PSCAD/EMTDC, and the power quality is measured and evaluated. Power quality is divided by two cases; harmonics and high-frequency. Harmonics were evaluated according to IEEE Std. 519-1992. But the evaluation of High-frequency could not take it because there was no standard. For this reason, the data measured by OLEV system was compared with the EN50065 regulation.

Correlates of Digit Bias in Self-reporting of Cigarette per Day (CPD) Frequency: Results from Global Adult Tobacco Survey (GATS), India and its Implications

  • Jena, Pratap Kumar;Kishore, Jugal;Jahnavi, G.
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.14 no.6
    • /
    • pp.3865-3869
    • /
    • 2013
  • Background: Cigarette per day (CPD) use is a key smoking behaviour indicator. It reflects smoking intensity which is directly proportional to the occurrence of tobacco induced cancers. Self reported CPD assessment in surveys may suffer from digit bias and under reporting. Estimates from such surveys could influence the policy decision for tobacco control efforts. In this context, this study aimed at identifying underlying factors of digit bias and its implications for Global Adult Tobacco Surveillance. Materials or Methods: Daily manufactured cigarette users CPD frequencies from Global Adult Tobacco Survey (GATS) - India data were analyzed. Adapted Whipple Index was estimated to assess digit bias and data quality of reported CPD frequency. Digit bias was quantified by considering reporting of '0' or '5' as the terminal digits in the CPD frequency. The factors influencing it were identified by bivariate and logistic regression analysis. Results: The mean and mode of CPD frequency was 6.7 and 10 respectively. Around 14.5%, 15.1% and 15.2% of daily smokers had reported their CPD frequency as 2, 5 and 10 respectively. Modified Whipple index was estimated to be 226.3 indicating poor data quality. Digit bias was observed in 38% of the daily smokers. Heavy smoking, urban residence, North, South, North- East region of India, less than primary, secondary or higher educated and fourth asset index quintile group were significantly associated with digit bias. Discussion: The present study highlighted poor quality of CPD frequency data in the GATS-India survey and need for its improvement. Modeling of digit preference and smoothing of the CPD frequency data is required to improve quality of data. Marketing of 10 cigarette sticks per pack may influence CPD frequency reporting, but this needs further examination. Exploring alternative methods to reduce digit bias in cross sectional surveys should be given priority.

The Systematic Management for Trace Hazard Compounds in Drinking Water (수돗물에서 미량유해물질의 체계적 관리방안 연구)

  • Park, Sun-Ku;Rim, Yeon-Taek
    • Journal of Korean Society on Water Environment
    • /
    • v.21 no.5
    • /
    • pp.431-441
    • /
    • 2005
  • The study was carried out to improve and regulate the drinking water quality standard and drinking water quality monitoring substances. For the reliability and safety of finished water, It has been monitored for trace organic and inorganic compounds of 333 in finished water of water treatment plants during 1989 to 2003. As a result of monitoring, 51 compounds were detected from 333 compounds, and it has been regulated the drinking water quality standard of 26 substances and 20 mitoring substance. Improvement and regulation method of the drinking water quality standard was performed by comparing and analyzing with detection concentration, detection frequency, risk assessment and foreign drinking water quality standard.

Frequency Characteristics of Octagonal Spiral Planar Inductor (팔각 나선형 박막 인덕터의 주파수 특성)

  • Kim, Jae-Wook
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.3
    • /
    • pp.1284-1287
    • /
    • 2012
  • In this study, we propose the structures of octagonal spiral planar inductors without underpass and via, and confirm the frequency characteristics. The structures of inductors have Si thickness of $300{\mu}m$, $SiO_2$ thickness of $7{\mu}m$. The width of Cu coils and the space between segments have $20{\mu}m$, respectively. The number of turns of coils have 3. The performance of spiral planar inductors was simulated to frequency characteristics for inductance, quality-factor, SRF(Self- Resonance Frequency) using HFSS. The octagonal spiral planar inductors have inductance of 2.5nH over the frequency range of 0.8 to 1.8 GHz, quality-factor of maximum 18.9 at 5 GHz, SRF of 11.1 GHz. Otherwise, square spiral planar inductors have inductance of 2.8nH over the frequency range of 0.8 to 1.8 GHz, quality-factor of maximum 18.9 at 4.9 GHz, SRF of 10.3 GHz.