• Title/Summary/Keyword: Frequency Guard Band

Search Result 46, Processing Time 0.027 seconds

Complex Bandpass Sampling Technique and Its Generalized Formulae for SDR System (SDR 시스템을 위한 Complex Bandpass Sampling 기법 및 일반화 공식의 유도)

  • Bae, Jung-Hwa;Ha, Won;Park, Jin-Woo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.7C
    • /
    • pp.687-695
    • /
    • 2005
  • A bandpass sampling technique, which is a method directly downconverting a bandpass signal to a baseband or a low IF signal without analog mixers, can be an alterative choice for the SDR system to minimize the RF front-end. In this paper, a complex bandpass sampling technique for two bandpass-filtered signals is proposed. We derived generalized formulae for the available sampling range, the signal's IF and the minimum sampling frequency taking into consideration the guard-bands for the multiple RE signals. Thru the simulation experiments, the advantages of the . complex bandpass sampling over the pre-reported real bandpass sampling are investigated for applications in the SDR design.

Control Technique of Modem Output Level to improve Frequency Response Equalization of Satellite TX Terminals (위성 단말 송신부의 주파수 응답 평탄도를 향상시키기 위한 모뎀 출력 조절 방법)

  • Cho, Tae-Chong
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.19 no.5
    • /
    • pp.129-133
    • /
    • 2019
  • Frequency resource efficiency is important in satellite communication systems. One of the causes of a waste of frequency resource is bad flatness. In the case, flatness of satellite Tx terminals would be worse by ACI and guard band. In order to overcome this problem, this paper proposes a technique for frequency response equalization in satellite Tx terminals. First of all, a general linear polynomial expression which meets least squares of representative measurement data is calculated to interpolate unmeasured data. And then flatness can be adjusted using the polynomial expression. Simulation results illustrate adjusted data have lower peak to peak and standard deviation than original data, and these show that flatness be improved.

Development of Safety Devices for Marine Leisure (해양레저 안전장비 개발)

  • Ku Ja-Young;Yim Jeong-Bin;Lee Je-Eung;Nam Taek-Keun;Jeong Joong-Sik;Park Seong-Hyeon;Yang Weon-Jae;Ahn Yeong-Sub
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2006.06b
    • /
    • pp.241-246
    • /
    • 2006
  • This paper describes two kinds of personal hand-held electronic devices to support marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

  • PDF

Spectral encapsulation of OFDM systems based on orthogonalization for short packet transmission

  • Kim, Myungsup;Kwak, Do Young;Kim, Ki-Man;Kim, Wan-Jin
    • ETRI Journal
    • /
    • v.42 no.6
    • /
    • pp.859-871
    • /
    • 2020
  • A spectrally encapsulated (SE) orthogonal frequency-division multiplexing (OFDM) precoding scheme for wireless short packet transmission, which can suppress the out-of-band emission (OoBE) while maintaining the advantage of the cyclic prefix (CP)-OFDM, is proposed. The SE-OFDM symbol consists of a prefix, an inverse fast Fourier transform (IFFT) symbol, and a suffix generated by the head, center, and tail matrices, respectively. The prefix and suffix play the roles of a guard interval and suppress the OoBE, and the IFFT symbol has the same size as the discrete Fourier transform symbol in the CP-OFDM symbol and serves as an information field. Specifically, as the center matrix generating the IFFT symbol is orthogonal, data and pilot symbols can be allocated to any subcarrier without distinction. Even if the proposed precoder is required to generate OFDM symbols with spectral efficiency in the transmitter, a corresponding decoder is not required in the receiver. The proposed scheme is compared with CP-OFDM in terms of spectrum, OoBE, and bit-error rate.

Analysis on Performance for Network Sharing in Adjacent Channels (인접채널에서 네트웍 공유를 위한 성능 분석)

  • Cho, Ju-Phil;Lee, Ock-Goo
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.11 no.5
    • /
    • pp.179-184
    • /
    • 2011
  • In this paper, we analyze the sharing parameters in order to co-use of different communication systems in adjacent channels. We analyze the performance result according to various density of interfering transmitter and transmitter output in hetero systems. In order to get the relationship with between density of interfering transmitter and transmitter output, we consider the case that WiBro is an interfering transmitter an WLAN is a victim receiver. When the center frequency of WLAN is 687MHz and interferer density is 50/$km^2$, required guard band is 10MHz. Analyzed coexistence results may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

Development of Personal Hand-held Electronic Devices for Marine Leisure Safety (해양레저 안전을 위한 개인 휴대용 전자장치 개발)

  • Yim Jeong-Bin;Nam Taek-Keun
    • Journal of Navigation and Port Research
    • /
    • v.30 no.5 s.111
    • /
    • pp.357-362
    • /
    • 2006
  • This paper describes two kinds of personal hand-held electronic devices to enhance marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

A Parameter Analysis for System Co-existence between Adjacent Channels in Extended Hata Channel Environment (Extended Hata 채널 환경에서 인접채널간 시스템 공존을 위한 파라미터 분석)

  • Cho, Ju-Phil
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.5
    • /
    • pp.879-884
    • /
    • 2012
  • In this paper, we analyze the sharing parameters in order to co-use of different communication systems in adjacent channels. We analyze the performance result according to various density of interfering transmitter and transmitter output in hetero systems. In order to get the relationship with between density of interfering transmitter and transmitter output, we consider the case that WiBro is an interfering transmitter an WLAN is a victim receiver. When the interferer density is 50/$km^2$ and the center frequency of WLAN and WiBro are 185 and 201MHz respectively, required guard band is 4MHz. Analyzed coexistence results may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

A Spectrum Sharing Model for Compatibility between IMT-Advanced and Digital Broadcasting

  • Hassan, Walid A.;Rahman, Tharek Abd
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.6 no.9
    • /
    • pp.2073-2085
    • /
    • 2012
  • Recently, the International Telecommunication Union allocated the 470-862 MHz band to the digital broadcasting (DB) service. Moreover, the 790-862 MHz sub-band will be allocated to the next-generation mobile system, known as the International Mobile Telecommunication - Advanced (IMT-A), and to the DB on a co-primary basis in the year 2015. Currently, two candidate technologies are available to represent the IMT-A system; the Mobile WiMAX and Long Term Evolution - Advanced (LTE-A). One of the main criteria of the IMT-A candidate is to not cause additional interference to the primary service (i.e., DB). In this paper, we address the spectrum sharing issue between the IMT-A candidates and the DB service. More precisely, we investigate the interference effect between the DB service and the mobile network, which could be either LTE-A or WiMAX. Our study proposes a spectrum sharing model to take into account the impact of interference and evaluates the spectrum sharing requirements such as frequency separation and separation distance. This model considers three spectrum sharing scenarios: co-channel, zero guard band, and adjacent channel. A statistical analysis is performed, by considering the interferer spectrum emission mask and victim receiver blocking techniques. The interference-to-noise ratio is used as an essential spectrum sharing criterion between the systems. The model considers the random distribution of the users, antenna heights, and the bandwidth effect as well as the deployment environment in order to achieve spectrum sharing. The results show that LTE-A is preferable to WiMAX in terms of having less interference impact on DB; this can eventually allow the operation of both services without performance degradation and thus will lead to efficient utilization of the radio spectrum.

Derivation of the Baseline and Interference Effects for Block Edge Mask (Block Edge Mask의 대역 외 방출 기준치 유도 및 간섭 영향 분석)

  • Kim, Min-Jae;Kang, Yun-Seok;Lee, Hyuck-Jae
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.12A
    • /
    • pp.1034-1043
    • /
    • 2011
  • As an introduction of an open spectrum allocation approach with technology and service neutrality is expected as a way to solve problems of frequency shortage due to the expansion of demand for wireless multimedia communications, recently, the new management model of interferences and its standard setting are required. In this paper, as a model for this new interference management considering several candidates, Block Edge Mask(BEM) approach is chosen as the most appropriate model. And to investigate the effects of interference resulting from the standard setting of BEM, assuming the use of LTE systems in the Digital Dividend, BEM out-of-band baseline in the boundaries between digital terrestrial television (DTV) service and LTE mobile communications services which are heterogeneous systems for analysis is derived and the effect of setting guard band is analyzed.

Performance Analysis of Channel Compensation and Channel Coding Techniques based on Measured Maritime Wireless Channel in VHF-band Ship Ad-hoc Network (VHF 대역 선박 간 애드혹 네트워크에서 실측 해상채널에 기반한 채널 보상과 채널 부호화 기법의 성능분석)

  • Jeon, Kwang-Hyun;Hui, Bing;Chang, Kyung-Hi;Kim, Seung-Geun;Kim, Sea-Moon;Lim, Yong-Kon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.5B
    • /
    • pp.517-529
    • /
    • 2011
  • In this paper, the parameters of the RTT (Radio Transmission Techniques) for SANET (Ship Ad-hoc NETwork), which is considered for the next generation maritime communication systems, are set up. A channel model has been analyzed based on the practical measured maritime wireless channel in VHF (Very-High Frequency) for SANET system. Also, by considering the frame structure including preamble, guard time and pilots for both single and multi-carrier systems, the BER (Bit Error Rate) performances are evaluated and analyzed in the aspects of channel compensation and channel coding techniques. Based on the simulation results, optimal modulation & coding schemes are suggested for SANET. That is, in single-carrier system by using differential modulation schemes, channel compensation is not necessary. However, channel coding is helpful to achieve additional gain. On the other hand, when 16-QAM modulation is employed in multi-carrier system, the implementation of both channel compensation and channel coding techniques show huge performance gain for various of K values, which are related to different maritime environments, and the rolling effects of wave.