• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.217-220
• /
• 2005

무선 다중경로 채널에서 데이터를 고속으로 전송할 경우, 신호는 페이딩, ISI(inter-symbol interfrence) 등의 영향으로 높은 에러율을 가지게 된다. 현재의 DSRC 시스템은 1Mbps 이상의 데이터 서비스가 어려울 것으로 예상되므로 개선된 변복조방식이 요구된다. OFDM(orthogonal frequency division multiplexing) 방식은 보호기간의 삽입을 통하여 ISI를 방지할 수 있으므로 고속 데이터 전송에 적합하다. 따라서 본 논문에서는 다중경로 페이딩 환경에서 시뮬레이션을 통하여 12 Mbps 전송 속도를 갖는 OFDM/QPSK 통신 시스템의 BER 성능을 비교${\cdot}$분석하고 다중경로 페이딩 환경에서 채널 상태를 추정 보상하기 위하여 판정 궤환경 등화기(Decision Feedback Equalizer)를 적용하여 시스템 성능을 개선하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.351-358
• /
• 1998

This paper deals with the underwater image transmission system which includes in AUV(Autonomous Underwater Vehicle) Project(that is VORAM(Vehicle for Ocean Research And Monitoring)), developed by KIMM for survey and investigation of a sea-bed through transmitting the underwater image to the mother ship. The system presented in this paper consists of a transducer which has a 136KHz center frequency and it's 10KHz bandwidth, pre-amplifier, $\pi$/4 QPSK(Quadreature Phase Shift Keying) modulation/demodulation method, image compressing method using JPEG technique and modified Stop & protocol. The experimental results of the system is verified to a high performance with 9600 bps for transmitting the underwater image through the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation. And, the viterbi coding and adaptive equalizer for cancelling the multipath effect are developing for more effective image transmission system. Also, these technique will very effectively adapt to realtime image transmission system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.369-372
• /
• 2003

This paper describes a design of OFDM (Orthogoanl Frequency Division Multiplexing) based wireless LAN system receiver, defined in IEEE 802.11a standards. Because OFDM system uses several orthogonal sequence sets, it ran avoid selective fading of fast data transfer problem when it is used with error correction code. But if the receiver is not synchronized, the orthogonal of between sub-ralliers will be destroyed and the data interruption will be generated. So it makes error property get worse very murk. For improving the noise error, we use the relationship of phasor between sub-carriers and make system synchronization using one tab equalizer. The designed OFDM block is described by Verilog HDL for the efficient and small size hardware. And we preform the functional verification and evaluation using the vector of standards.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.402-411
• /
• 2006

In OFDMA system, multiple users transmit signal through the subcarriers assigned to the user. Capabilities of high data-rate transmission in OFDMA system come from the ability to compensate the ICI (Inter Carrier Interference) using a single-tap equalizer and to implement transmitter and receiver by employing high speed FFT circuitry. Issues of time and frequency synchronization in OFDM system is quite essential to preserve the orthogonality among subcarriers not to produce ICI. In this paper, we Int analyze the preamble used in 802.16 d/e and WiBro system. Then we propose an effective timing synchronization algorithm, which is more accurate than the conventional one in the sense of timing position, and integral frequency offset estimation scheme for the simultaneouse estimation of the fractional and integral frequency offset. Through the simulation utilizing the proposed synchronization algorithm and structure, we show that the performance degradation due to the adjacent channel interference can be mitigated for the than conventional ones.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.207-215
• /
• 2011

A signal passed through multi-path channel suffers ISI(Inter-Symbol Interference) and severe distortions caused by channel delay spread and noise components at the SC-FDE(Single Carrier with Frequency Domain Equalizer) transmission. Conventional UW(Unique-Word) based SC-FDE iterative channel estimation improves channel estimation performance by smoothing estimated CIR(Channel Impulse Response) of the noise components outside the channel length at time domain and restoring the broken cyclic property through UW reconstruction. In this paper, we propose channel estimation scheme through noise suppression within channel length. To suppress the noise, we estimate noise standard deviation as estimated CIR of the noise components outside the channel length and make criteria of the noise standard deviation gain that doesn't affect the original signal samples. When estimated CIR samples within channel length are less than the criteria value using the noise standard deviation and gain, the noise components are removed. Simulation results show that the proposed channel estimation scheme brings good channel MSE(Mean Square Error) and good BER(Bit Error Rate) performance.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.507-513
• /
• 2012

The room modes were showed as the peaks and dips on the low frequency response of the loudspeaker, and were one of the biggest obstacles to reproduce the sound. In order to reduce the occurrence of resonance, equalizing is performed at one position, and the frequency response to be equalized is valid only at that position. Performing the equalization would improve the flatness of the frequency response a little, but it cannot eliminate the ringing. Another method is that it is located the speaker at the specific position where the room resonances were not frequently happened. However, there may be the practical limitation that you may not be able to install the speaker at the position to be wanted. One of the practical solutions to decrease the production of resonance in room is the use of bass trap. In this paper, the practical limit for the room tuning using an equalizer and the room optimization will be discussed. The use of bass traps to solve the resonance problem that is always happened in the room is also proposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.4
• /
• pp.1-8
• /
• 2008

In orthogonal frequency division multiplexing (OFDM) system the time selectivity of wireless channel introduces intercarrier interference (ICI), which degrades system performance in proportion to Doppler frequency. To mitigate the ICI effect, we can generally employ a classical zero-forcing (ZF) equalizer. However, the ZF scheme requires an inverse of a large matrix, which results in prohibitively high computational complexity. In this paper, we propose a low complexity ZF equalization scheme for suppressing the ICI caused by highly time-varying channels in OFDM systems. From the fact that the ICI on a subcarrier is mainly caused by several neighboring subcarriers, the proposed scheme exploits a numerical approximation for matrix inversion based on Neumann's Series (truncated second order). To further improve performance, the partial ICI cancellation technique is also used with reduced complexity. Complexity analysis and simulation results show that the proposed scheme provides the advantage of reducing computational complexity significantly, while achieving almost the same performance as that of the classical ZF a roach.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.371-383
• /
• 2004

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks (SFN) in the Advanced Television Systems Committee (ATSC) transmission systems and propose equalization digital on-channel repeater (EDOCR) that overcomes the limitations of conventional digital on-channel repeaters (DOCRs). Since there are no forward error correction (FEC) decoder and encoder, the EDOCR does not have an ambiguity problem. In addition, since an adaptive equalizer in the EDOCR removes multi-path signals, additive white Gaussian noise (A WGN), and feedback signal due to low antenna isolation, the EDOCR may have good output signal quality with high power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1032-1039
• /
• 2022

In this paper, we designed and implemented a cavity bandpass filter combined with a cross-coupling equalizer structure to enhance Group delay for 5G mobile network repeater, which can replace the SAW (Surface Acoustic Wave) type bandwidth filter used in the existing mobile communication system. Using the 3D EM simulation tool (HFSS), the resonance frequency, the coupling coefficient between resonators, and external quality coefficient between resonators were calculated. Based on this, a 12th bandpass filter was constructed to have attenuation characteristics of more than 20dB at the edge end of both sides of the band with a metal cavity structure with a frequency band of 3500MHz to 3600MHz and bandwidth of 97.85MHz. The designed bandpass filter satisfies the group delay time requirement for the 5G mobile communication standard and the in-band and out-band frequency responses.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.494-501
• /
• 2013

The convolution code(CC) of code rate 1/2 as a forward error correction (FEC) in Quadrature Phase Shift Keying (QPSK) is applied to decrease bit error rate (BER) by background noise and multipath in shallow water acoustic channel. Ratio of transmitting signal bandwidth to channel coherence bandwidth is defined as frequency selectivity index. BER and bit energy-to-noise ratio gain of transmitted signal according to frequency selectivity index are evaluated. In the results of indoor water tank experiment, BER is well matched theoretical results at frequency selectivity index less than about 1.0. And bit energy-to-noise ratio gain is also matched theoretical value of 5 dB. BER is effectively decreased at frequency selective multipath channel with frequency selectivity index higher than 1.0. But bit energy-to-noise ratio greater than a certain size in terms of CC weaving is effective in reducing bit errors. In the results, the defined frequency selectivity index in this study could be applied to evaluate a performance of CC in multipath channel. Also it could effectively reduced BER in a low speed underwater acoustic communication system without an equalizer.