• 한국음향학회지
• /
• 제30권7호
• /
• pp.396-401
• /
• 2011

본 논문에서는 잡음환경에서 효과적인 음성을 검출하기 위한 새로운 음성검출 (VAD, voice activity detection) 알고리즘을 제안한다. 제안된 방법은 개선된 음성/비음성 검출을 위해 기존의 파워 스펙트럼 편차를 적용하는 대신 Teager 에너지 기반의 파워 스펙트럼 편차 (power spectral deviation)를 이용한다. 또한 향상된 VAD 성능을 위하여 각각의 주파수 밴드에 대한 음성부재확률 (speech absence probability)을 제안된 파워 스펙트럼 편차를 도출하는데 스무딩 (smoothing) 파라미터로 적용한다. 제안된 알고리즘은 기존의 방법과 객관적인 실험을 통해 비교 평가한 결과 다양한 배경잡음 환경에서 향상된 성능을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.110-113
• /
• 2006

This paper describes the development process of body and full vehicle for reduced idle vibration through the data level of frequency and sensitivity. The vibration mode map is used to separate body structure modes from resonance of engine idle nm and steering system. This paper describes the analysis approach process to reduce the variation of uncertainties for idle vibration performance at initial design stage. The robust design method is performed to increase the stabilization performance under vehicle vibration. It is used to predict the effects of the stiffness deviation according to the spot welding condition of the body structure. The tolerance associated with hood over slam bumper is analyzed for the quality deviation of the moving system in full vehicle. And the glass sealant stiffness and weight difference is considered for the deviation characteristic. The design guideline is suggested considering sensitivity about body and full vehicle by using mother car at initial design stage. It makes possible to design the good NVH performance and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.191-196
• /
• 2014

In the evaluation of measured noise data, tolerance shall be decided based on the uncertainty. The uncertainty has frequency variations due to the different standard deviations at each frequency. Therefore, tolerance shall be differently decided for each frequency with the same confidence probability. In the report, the evaluation method considering the frequency variation of uncertainty will be introduced. From the approach, considering the actual noise distribution characteristics of the ships, the tolerance shall be decided for each frequency with the same probability, but the overall averaged value shall be kept to the value designated in each notation.

• 한국지반공학회지:지반
• /
• 제4권3호
• /
• pp.5-18
• /
• 1988

3종의 입상체시료를 대상으로 공극비의 빈도분포, 상대밀도 전단강도 등에 대한 시험연구결과 (1) 유리알의 경우 공극비의 빈도분포는 Shahinpoorl가 제안한 음의 지수분포에 접근하며 입자의 모양은 구형에서 각형의 순으로 변화되는 반면에 조밀한 공극의 빈도는 감소하며 Beta분포로서 잘 나타냈다. (2) 전 시료에서 공극비의 표준편차는 시료의 상대밀도와 입자의 구형성이 감소함에 따라 증가하였다. (3) 전단강도는 평균공극비와 표준편차의 함수일 뿐만 아니라 공극비 분포의 확율밀도함수이다. (4) 공극비는 정도분포가 조밀한 공극쪽으로 기울수록 시료의 전단강도는 더 크며 이의 역도 또한 같다.

• 전기학회논문지P
• /
• 제60권2호
• /
• pp.76-81
• /
• 2011

Power system frequency is the main index of power quality indicating an abnormal state and disturbances of systems. The nominal frequency is deviated by sudden change in generation and load or faults. Power system is used as frequency relay to detection for off-nominal frequency operation and connecting a generator to an electrical system, and V/F relay to detection for an over-excitation condition. Under these circumstances, power system should maintain the nominal frequency. And frequency and frequency deviation should accurately measure and quickly estimate by frequency measurement device. The well-known classical method, frequency estimation technique based on the DFT, could be produce the gain error in accuracy. To meet the requirements for high accuracy, recently Wavelet transforms and analysis are receiving new attention. The Wavelet analysis is possible to calculate the time-frequency analysis which is easy to obtain frequency information of signals. However, it is difficult to apply in real-time implementation because of heavy computation burdens. Nowadays, the computational methods using the Wavelet function and transformation techniques have been searched on these fields. In this paper, we apply the Recursive Discrete Wavelet Transform (RDWT) for the frequency estimation. In order to evaluate performance of the proposed technique, the user-defined arbitrary waveforms are used.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.332-336
• /
• 1989

This paper describes the nonlinear analysis and effectual operation methods of thermal power plant turbine control system. When the turbine control governor system has dead-zone characteristic, the effectual frequency development control is difficult, because turbine output does not correspond to frequency deviation in dead-zone. Therefore to obtain effectual correspondance, the turbine dead-zone characteristic must be analyzed by proper method. This paper proposes this nonlinear analysis and effectual plant operating load.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.134-135
• /
• 2003

Abstract in case of the small scale power system separated from large scale power system N-2 contingency, the Over excitation, Under Frequency and Power swing Tripping Relay operate depending on unbalance Of Generation and Load. and then we studied and measured the angle and frequency deviation between generators. moreover, we compared real fault example with simulation results.

• 천문학회보
• /
• 제37권2호
• /
• pp.79.1-79.1
• /
• 2012

Due to the quantum interference of many atomic levels, the exact scattering cross section around a given resonance transition deviates from the Lorentz function when the frequency of the incident radiation is quite far from the resonance frequency. This atomic effect is quite significant in the case of damped Ly alpha systems, where HI column density is in excess of 10^20 cm^-2. In this poster, we present the deviation quantitatively taking into consideration of the Rayleigh and Raman scattering around Lyman alpha and Lyman beta.

• ETRI Journal
• /
• 제38권3호
• /
• pp.455-462
• /
• 2016

Frequency hopping (FH) is a common characteristic of a wide variety of communication systems. On the other hand, software-defined radio (SDR) is an increasingly utilized technology for implementing modern communication systems. The main challenge when trying to realize an SDR FH system is the frequency tuning time, that is, the higher the hopping rate, the lower the required frequency tuning time. In this paper, significant universal hardware driver tuning options (within GNU Radio software) are investigated to discover the tuning option that gives the minimum frequency tuning time. This paper proposes an improved SDR frequency tuning algorithm for the generation of a target signal (with a given target frequency). The proposed algorithm aims to improve the frequency tuning time without any frequency deviation, thus allowing the realization of modern communication systems with higher FH rates. Moreover, it presents the design and implementation of an original GNU Radio Companion block that utilizes the proposed algorithm. The target SDR platform is that of the Universal Software Radio Peripheral USRP-N210 paired with the RFX2400 daughter board. Our results show that the proposed algorithm achieves higher hopping rates of up to 5,000 hops/second.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권3호
• /
• pp.197-206
• /
• 2021

We compared two typical ensemble time scale algorithms; AT1 and Kalman filter. Four commercial atomic clocks composed of two hydrogen masers and two cesium atomic clocks provided measurement data to the algorithms. The allocation of relative weights to the clocks is important to generate a stable ensemble time. A 30 day-average-weight model, which was obtained from the average Allan variance of each clock, was applied to the AT1 algorithm. For the reduced Kalman filter (Kred) algorithm, we gave the same weights to the two hydrogen masers. We also compared the frequency stabilities of the outcome from the algorithms when the frequency offsets and/or the frequency drift offsets estimated by the algorithms were corrected or not corrected by the KRISS-made primary frequency standard, KRISS-F1. We found that the Kred algorithm is more effective to generate a stable ensemble time scale in the long-term, and the algorithm also generates much enhanced short-term stability when the frequency offset is used for the calculation of the Allan deviation instead of the phase offset.