• Journal of Environmental Health Sciences
• /
• v.23 no.2
• /
• pp.98-105
• /
• 1997

The study on the cytotoxicity of heavy metals was carried out to evaluate the cytotoxic effect of those on mouse L929 fibroblast cell in 96-well microtiter plates. The cytotoxicity was assayed by the neutral red, tetrazolium MTT, total protein, micronuclei test. The cytotoxicity of the heavy metals by neutral red and tetrazolium MTT was showed in order, cadmium > zinc > nickel for the cationic metals tested. The effect of metal-metal interaction on the cytotoxicity showed a marked reduction of cadmium toxicity by zinc, to a lesser degree, by nickel. The amount of total protein in treated group added heavy metals was less than that of the control and treated cadmium alone was less than those of combination with nickel or zinc. At midpoint cytotoxicity values of heavy metals, the frequency of micronuclei on the cell treated heavy metals was more than that of control and treated cadmium alone was more than those of combination with nickel or zinc. From those results, it could be suggested that the heavy metals decreased the viability of mouse fibroblast L929 cells in a concentration-dependent manner and have cytogenic toxic effects, but mixed group decreased the cytotoxic and cytogenic toxicity on L929 cells.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.6
• /
• pp.951-961
• /
• 2019

Objectives: This study aims to evaluate how the amount and duration of smoking effects the bleeding and pain of gingival among adolescents in Korea while also taking into consideration the impact of drinking. Methods: Data were utilized from a web-based survey of youth health behaviors conducted by the Korean Center for Disease Control and Prevention in 2016. The subjects of the study included 65,528 adolescents from middle and high schools. As dependent variables, bleeding and pain of gingival were used. Data were analyzed using the SPSS Version 20.0 program. Results: After adjusting for the general characteristics and oral health behaviors of the subjects, in the long-term, the ≥0.52 PY group (heavy smoker) experienced 1.28 times higher bleeding and pain of gingival than the <0.52 PY group (light smoker) among adolescents who smoke and drink at the same time. Adolescents who smoked without drinking did not show any difference on bleeding and pain of gingival according to the amount of smoking in the short- and long-term. However, the findings reveal that there was a difference on bleeding and pain of gingival according to tooth brushing frequency. Conclusions: In order to promote the periodontal health of adolescents, it is argued that programs and projects should be implemented to prevent, educate, and control simultaneous behaviors of smoking and drinking.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.179-181
• /
• 2003

Conventional P/PI speed controller of today's servo drives should be manually tuned the controller switching set-point by trial-and-errors, which may translate the drive system down-time and loss of productivity. The adjustable drive performance is heavily dependent on the qualify of the expert knowledge and becomes inadequate in applications where the operating conditions change in a wide range, i.e., tracking command, cceleration/deceleration time, and load disturbances. In this paper, the demands on simple controls/setup are discussed for industry servo drives. Analyzing the frequency content of motor torque command, P/PI control mode switching is automatically peformed with some prior knowledge of the mechanical dynamics. The dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of traditional P/PI control scheme, extensive test is carried out on actual servo system.

• Korean Institute of Interior Design Journal
• /
• no.20
• /
• pp.3-9
• /
• 1999

The purpose of this study was to verify the stability of environmental disposition through analyzing the short term effect of the 'Interior Design History' course on students environmental dispositions, especially their interior image preferences toward traditional/modern, female/masculine, and simple/complex characteristics. The pre-test post-test control group experimental design was used. The independent variable was the experience of the Interior Design History course, and the dependent variable was environmental disposition measured by IIPS(Interior Image Preference Scale). The measurements were done at both beginning and end of fall semester, 1997. Subjects were using 71 undergraduate students of Drafting course (control group) and 35 undergraduate students of Interior Design History course (experimental group) at Y University. Data were analyzed using frequency, percentage, mean, and F-test through ANOCOVA. This research revealed no effect of the Interior Design History course on students interior environmental dispositions. The stability of those environmental dispositions and also the validity of the IIPS were proved.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.111-121
• /
• 1997

The stability of a rotor-bearing system supported by swirl-controlled hybrid journal bearing with pair-type angled injection orifices is investigated for improvement of the whirl frequency ratio by allowing effective control of the tangential flow inside the bearing clearance, i.e., by achieving more freedom in controlling strength and direction of the supply tangential flow inside the bearing clearance. It is suggested that the system instability can be improved through the change of bearing dynamic characteristic parameters with the swirl control. The orifice diameter d$_0$ and recess injection angle $\alpha$ along with combinations of swirl/anti-swirl supply pressures and directions (3.0-3.0MPa, 4.0-2.0MPa, 2.0-4.0MPa) are selected for design parameters for swirl-controlled effective factors dependent on journal speeds (3000, 9000, 15000, 21000 rpm). It has been found that the orifice diameter do shows strong effects on effective maneuverability of direct-stiffness and direct damping values, while recess injection angle $\alpha$ results in substantial magnitude and direction of cross-stiffness. Specifically, recess injection parameters which are functions of angle of orifice feeding flow and recess dimensions showed very feasible effect on the stability of swirl-controlled rotor-bearing system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.39-47
• /
• 2005

In this paper, a novel high power micropump using active check valves in place of conventional passive check valves employed at the inlet and outlet ports is presented. It actively controls open/close motion of check valves using piezoelectric actuator for expansion/contraction of pump chamber. A prototype micropump having an effective size of $17mm{\times}8mm{\times}11mm$ is fabricated. Frequency-dependent flow rate characteristics, bi-directional flow characteristics and load characteristics are experimentally investigated using a timing control method for valve closing motion. From the obtained experimental results, it is ascertained that optimal values of the phase shift compared to the voltage to drive pump chamber are $15^{\circ}$ for inlet check valve and $195^{\circ}$ for outlet. Based on the obtained results, a sheet-type active shuttle valve that has a unified valve-body for inlet and outlet check valves is proposed. A micropump with an effective size of $10mm{\times}10mm{\times}10mm$ is fabricated and the basic characteristics are experimentally investigated.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.175-182
• /
• 2010

The purpose of this study was to evaluate the biomechanical effect of sports taping on the lower limb during drop landing. Twelve male university students who have no musculoskeletal disorder were recruited as the subjects. Principal strain, median frequency, vertical GRF, loading rate, angular velocity and resultant joint moment were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between taped and untaped conditions(p<.05). The results showed that principal strain of the thigh and the shank in taping group were significantly less than those found in control group. These indicated that sports taping may prevent excessive mechanical strain caused by impact force during the deceleration phase. Flexion(-)-extension(+) and varus(-)-valgus(+) resultant joint moment of the knee joint in taping group were greater than corresponding value for control group. It seems that extensor muscle of the knee joint were not only supported by sports taping during knee flexion but also sports taping is effective for minimizing the possibility of injury.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.519-531
• /
• 2020

This research aims to identify the determinants of e-government satisfaction in Hanoi, Vietnam, and assess their impact. To collect data, we conducted an online questionnaire with citizens living in Hanoi in a time span of five weeks. We received 1,107 responses, divided into three groups: unaware, known, but not used, and used e-government. After leveraging past studies on satisfaction in different contexts, we arrived at six external variables that are of particular relevance to e-government satisfaction (i.e., efficiency, trust, reliability, convenience, citizen support, and transparency) as well as four control variables (i.e., age, gender, education level, and Internet frequency). We then applied both SPSS 22 and STATA 2016 to process and analyze the collected data and found that, while almost all external variables are statistically significant, all four control variables are not. Apart from convenience and trust, four factors - efficiency, reliability, citizens support, transparency - are important measures of system quality, information quality, service quality and relative benefits of e-government, which in turn positively and significantly impact citizens' satisfaction with the online public services. Furthermore, the efficiency variable has the most influence on customer satisfaction, and the level of impact on the dependent variable decreases in the following order: citizen support, reliability and transparency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5306-5313
• /
• 2011

Most previous studies for finding optimal design parameters of a tuned mass damper(TMD) have been focused on the harmonic excited single-degree-of freedom system. In this study, optimal values of damping ratio and tuning frequency ratio of a TMD applied to control a seismically excited structure are investigated through numerical analyses. Considering that the structural responses due to earthquake loads are strongly dependent on the soil condition, the site effects on the optimal parameters of the TMD are studied and compared to those presented by previous studies. Numerical analyses results indicate that better control performance can be obtained by using the parameters proposed by this study in the seismic application of the TMD.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.481-491
• /
• 2022

The active sonar transmission system consists of a transmitter that outputs an electrical signal and an underwater acoustic transducer that converts the amplified electrical signal into an acoustic signal. In general, the transmitter output characteristics are dependent on load impedance, and an underwater acoustic transducer, which is a transmitter load, has a characteristic that the electrical impedance varies largely according to frequency when driven. In such a variable impedance condition, the output of the active sonar transmission system may become unstable. Hence, this paper proposes a design and control technique of a sonar transmitter for transmitting a stable transmission signal even under variable impedance conditions of an underwater acoustic transducer in an active sonar transmission system. The electrical impedance characteristics of the underwater acoustic transducer are experimentally analyzed, and the sonar transmitter is composed of a single-phase full-bridge inverter, an LC filter, and a matching circuit. In this paper, the design and output control method of the sonar transmitter is proposed to protect the transmitter and transducer. It can secure stable output voltage characteristics even if it transmits the Linear Frequency Modulation (LFM) signal. The validity is verified through the simulation and the experiment.