• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.34-38
• /
• 2002

기존에 제안된 도파관 스위치의 경우, 도파관의 E-plane에 PBG 기판을 내장하게 되는데, 이 경우 PBG 기판의 저항값을 조절해주는 MEMS 스위치의 바이어스 라인에 대한 문제점이 발생한다 본 논문에서는 PBG 기판을 도파관의 H-plane에 놓음으로써 바이어스 라인을 RF로부터 쉽게 분리하고, 또한 단일 공진 주파수를 갖는 PBG의 경우에 제한된 기판의 길이로 인하여 bandwidth가 좁아지는 문제점을 서로 다른 공진 주파수를 갖는 PBG 기판의 연결을 통해서 bandwidth를 약 80%이상 증가시킬 수 있음을 보였다.

• 대한전자공학회논문지
• /
• 제27권9호
• /
• pp.1321-1326
• /
• 1990

In this paper, the eye-opening conditions are investigated for the minimum bandwidth digital transmission systems where the sinc functions is used as a basic pulse so that only the Nyquist bandwidth is required for the channel. In order for these systems to be tolerant to the timing jitter in the receiver, the eye pattern should be open horizontally. It is proved that an eye opening condition which has been understood only as a sufficiency becomes a necessity as well. As its result, having a spectral null at teh Nyquist frequency is shown to have the same meaning as eye opening.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.487-492
• /
• 2003

This paper designs a Korea train identification module using a RFID system. Frequency bandwidth transmits and receives messages using the 27.095Mhz and 4.234Mhz in the ISM bandwidth. The mode of the modulation uses a transmission ASK and a receiving FSK. And it uses a reader and transponder using an active transponder. We use the loop antenna which the antenna has the directional.

• 한국음향학회지
• /
• 제4권1호
• /
• pp.16-21
• /
• 1985

Both shifiting the input signal's frequencies by a fixed frequency and compressing the input signal's bandwidth have been known to be effective in improving the stability margin of public adress systems operating in reverberant spaces. This paper describes the effect of an alternative approach of improving the acoustic-feedback stability and yet maintaining speech inteligibility by bandwidth compression and expansion. Conditions are derived for this technizue to be realized and an experimental system has been made - up. A series of experiments has been performed in small spaces and the results have shown that more than 5dB improvement can be obtained in the stability margin.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권11호
• /
• pp.830-835
• /
• 2006

데이타 및 음성 등의 통신에서 무선 통신의 비중은 날로 증가하고 있다. 그러나 무선 통신에서는 유선통신에 비해 여러 가지 자원의 제약을 받는다. 컴퓨터, PDA, 이동통신기기 등 급격히 증가하는 무선 단말기의 증가에 따른 통신량 수요를 충족하기위해 제한된 자원을 보다 효율적으로 사용해야 한다. 무선 통신에 있어 효율성이 필요한 자원중의 하나가 주파수 이다. 효율적 주파수 사용을 위한 주파수 할당 문제에 관한 연구는 현재 활발히 진행되고 있다. 그러나 대부분의 주파수 할당 문제가 NP-Complete의 어려운 문제로 실험적 연구를 통한 접근과 함께 이에 대한 이론적 이해 또한 필요하다. 주파수 할당 문제의 이론적 연구 중 셀룰러 위상구조에서의 크로마틱 대역폭 문제의 하한 값이 $O(k^2)$로 알려져 있다. 본 논문에서는 셀룰러 위상구조에서의 크로마틱 대역폭 주파수 할당 문제의 하한 값으로 기존에 알려진 $O(k^2)$보다 향상된 하한 값 $O(k^3)$을 제시하여, 주파수 할당 문제의 보다 정확한 이론적 이해를 제시하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.404-416
• /
• 2015

Small-area, low-power coarse and fine frequency detectors (FDs) are proposed for an adaptive bandwidth referenceless CDR with a wide range of input data rate. The coarse FD implemented with two flip-flops eliminates harmonic locking as long as the initial frequency of the CDR is lower than the target frequency. The fine FD samples the incoming input data by using half-rate four phase clocks, while the conventional rotational FD samples the full-rate clock signal by the incoming input data. The fine FD uses only a half number of flip-flops compared to the rotational FD by sharing the sampling and retiming circuitry with PLL. The proposed CDR chip in a 65-nm CMOS process satisfies the jitter tolerance specifications of both USB 3.0 and USB 3.1. The proposed CDR works in the range of input data rate; 2 Gb/s ~ 8 Gb/s at 1.2 V, 4 Gb/s ~ 11 Gb/s at 1.5 V. It consumes 26 mW at 5 Gb/s and 1.2 V, and 41 mW at 10 Gb/s and 1.5 V. The measured phase noise was -97.76 dBc/Hz at the 1 MHz frequency offset from the center frequency of 2.5 GHz. The measured rms jitter was 5.0 ps at 5 Gb/s and 4.5 ps at 10 Gb/s.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.865-868
• /
• 2005

A Helmholtz resonator is one of noise control elements widely used in many practical applications. The resonator has very high absorption at resonance frequency but the frequency bandwidth is very small. Therefore many kinds of additional resistive screens have been applied to the resonator's neck in order to increase the bandwidth. This paper discusses the absorptive characteristics of a Helmholtz resonator damped by a flexible porous screen in form of wire mesh. First, various experimental results are introduced and studied. Secondly, the effect of the resistive screen is theoretically predicted. It is shown that the distance between the screen and aperture affects on the resonance frequency as well as the absorption of the system.

• 조명전기설비학회논문지
• /
• 제24권3호
• /
• pp.20-26
• /
• 2010

In ultrashort-pulse reflectometry (USPR), a chirped waveform transformed from the USPR source impulse signal via waveguide makes it possible to employ millimeter-wave mixers for the frequency up-conversion process. Consequently, the frequency bandwidth of the USPR system is sufficiently wide to cover a large portion of the electron density profile of the plasma. Some physical aspects of the chirped waveform, such as maximum amplitude and length, are critical factors to determine the performance of the system. In this paper, the propagation of the USPR impulse signal through a rectangular waveguide is numerically studied to derive the chirped waveform using the impulse response of the waveguide. The results of numerical computation show that the chirped waveform significantly depends on the waveguide cutoff frequency as well as the waveguide length.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.280-285
• /
• 2008

The helmholtz resonator with the perforated neck has demerits that the absorption performance is not so outstanding in an anti-resonance frequency and high frequency bandwidth. In order to overcome these problems, in the paper, a resonator combined with porous material is proposed. The absorption performances of resonators are measured by two-microphone method and estimated by transfer matrix method. The experimentally measured values of normal absorption coefficients agree well with the corresponding values from the transfer matrix method. Because of the porous material, it is shown that the absorption performance have been significantly improved in the anti-resonance frequency and high frequency bandwidth.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.533-540
• /
• 2001

Material damping is an important parameter to evaluate the site response by a dynamic loading. Currently the material damping of the subgrade is mainly determined by a resonant column testing. Typical methods to evaluate material damping include half-power bandwidth method and free-vibration decay method. In the large strain range, the half-power bandwidth method gives an erratic damping factor, because the method is based on the assumption of the linear behavior of a specimen. The free-vibration decay method has also limitations in that the damping factors vary with the range of cycles in calculation, and also in that the specific shear strain can not be designated for the free vibration. In this study, the frequency-phase method, which was developed to evaluate material damping of a beam simply supported, is introduced to evaluate the material damping by the resonant column testing. Also, the comparison among half-power method, free-vibration decay method and the frequency-phase method is provided for a remolded sand.