• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.375-378
• /
• 2009

The Spectrum Sensing Technology is the core technology of the Cognitive Radio (CR) System that is one of the future wireless communication technologies. This is the technology that temporarily allocates the frequency bandwidth by scanning surrounding wireless environments to keep licensed terminals and search the unused frequency bandwidth. In this paper, we proposed the efficient Spectrum Sensing Method using the Short Time Fourier Transform (STFT). The Cosine and DVB-H signal with the 6MHz bandwidth is used as the Input Signal. And we confirm the Spectrum Sensing result using Modified Periodogram Method, Welch's Method for compared with Short Time Fourier Transform Algorithm.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.511-514
• /
• 2003

In this paper, describes the design of PIFA for PDA which has parasitic patch to expand the impedance bandwidth and miniaturization technique to consider the radiation pattern. To expand the impedance bandwidth, generated resonant frequency of parasitic patch is different from that of main patch. To miniaturize the physical dimension, using the folded edge and rectangular slot. The obtained impedance bandwidth is 9.4% ($2.29GHz{\sim}2.515GHz$) at VSWR${\leqq}$2 and antenna gain is 2dBi within the operating frequency.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.178-182
• /
• 2002

Superconducting four-element patch array antenna was designed and fabricated using $high-T_{c}$ superconducting (HTS) thin film. The array antenna has single-feed circularly polarization and a resonance frequency of 11.85 GHz fur satellite communication system. To fabricate this antenna $YBa_2$$Cu_3$$O_{7-x}$(YBCO) superconducting thin films were deposited using rf-magnetron sputtering technique. Sequential rotation technique based on radiation elements($0^{\circ}$ , $90^{\circ}$, 1$80^{\circ}$, $270^{\circ}$ phase delay) was utilized to achieve circularly polarization. Simulated and measured results, the analysis on resonant frequency(fr), return loss, and bandwidth are presented. The results show that 10 dB return loss bandwidth of the array antenna is 11.04 GHz~12.59 GHz (13.15%) and 3dB axial ratio bandwidth is 11.42~12.52 GHz (9.2%).).).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.10
• /
• pp.1074-1080
• /
• 1992

A(5,8) block binary line code is proposed. The new line code called MB58 has the properties of being dc-free and runlength-limited, and it is strictly bandwidth-limited to the Nyquist frequency, such that bandwidth efficiency is improved. This new code is a memoryless code with a simple decoding rule and capability of error monitoring. The power spectrum and the eye pattern of the new code are obtained by simulation, wherein spectral nulls at DC(f=0) and Nyquist frequency (f=1/2Ts) are clearly identified.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1094-1101
• /
• 2001

The design of a compact folded patch antenna with moderately broad bandwidth is presented in this paper. The proposed antenna has radiation characteristics that are similar to the conventional monopole antenna. However, since this antenna is designed in a planar form, it has smaller size than that of a conventional monopole antenna. We have investigated the resonance frequency and bandwidth characteristics of the proposed antenna by changing the antenna design parameters. The proposed planar form of a monopole antenna in this paper has 1.17 GHz bandwidth with a matching circuit at the center frequency of 6.05 GHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.770-775
• /
• 2004

Although $High-T_c $superconducting HTS antennas have high efficiency and high gain, narrow bandwidth due to the high Q is the major limitation for application of satellite communication and mobile communication. Defining bandwidth as the frequency range over which standing wave ratio (SWR) is 2:1 or less, HTS antenna bandwidths are typically less than 1 %. Thus considerable effort has been focused on developing HTS antennas for broadband operation. In this work the HTS antenna array, using the bipin antenna which consisted of two triangle-radiation patches, was designed and fabricated using a ${YBa}_2{Cu}_3{O}_7x (YBCO)$ superconducting thin film on a MgO substrate for broadband operation. Also gold antennas with the same dimension as our HTS antennas were fabricated on the MgO substrate for the comparison. Experimental results for both antennas were reported in terms of radiation patterns, return losses, bandwidths and other various characteristics. The center frequency of HTS antennas was 20.28 GHz and the bandwidth obtained was significant 10 %.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.56-63
• /
• 2019

Typical negative group delay circuits (NGDC) are analyzed in terms of signal attenuation, group delay, and bandwidth using S-parameters. By inverting these formulations, we derive and present the design equations (for NGD circuit elements) for a desired specification of the two among the three parameters. The proposed design method is validated through simulation examples for narrow- and wide-band pulse inputs in the time and frequency domains. Moreover, an NGDC composed of lumped elements is fabricated at 1 GHz for measurement. As a function of frequency, the circuit-/EM-simulated and measured group delays are in good agreement. The provided simple NGDC design equations may be useful for many applications that require compensations of some signal delays.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.10-18
• /
• 2007

Today, third-generation(3G) of mobile communication service executing the video and TV. And low cost, high speed data rate will emerge communication of the fourth generation(4G) in future. So, in this paper we studied occupied frequency bandwidth of common technique criteria among the technique criteria for the 4G mobile communication of FDD-based on Up/Down-link. The mobile communication traffic is predicted Up/Down-link of non-symmetric in future. So we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. We also verified this through the simulation. We proposed the occupied frequency bandwidth for the 4G mobile communication in this paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1370-1382
• /
• 2007

In this paper, the spiral planar monopole antenna mounted on a Cellular/WCDMA handset is designed. Frequency characteristics is optimized with various design parameters. The two spiral lines are adopted in order to implement Cellular frequency bandwidth and WCDMA frequency bandwidth. The bandwidth of the realized antenna is $0.805{\sim}0.892$ GHz(10 %) and $1.867{\sim}2.302$ GHz(21 %) for VSWR${\leq}2$ which contain the proposed frequency bandwidth. In human head, the simulated value on 1 g and 10 g averaged SAR caused by electromagnetic wave radiated in the designed antenna is compared with the measured value. As a result, the measured values of 1 g and 10 g averaged SAR were similar to the simulated values, which were lower than the SAR guidelines.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.13-19
• /
• 1975

A detailed analysis has been carried out of a zigzag traveling wave electro-optic laser modulator usin3 CuCl, KDP Crystal. The inclusion of such practical factors as M/W and optical loss results in an optimum design in which modulator dimensions and bandwidth limitation are uniquely determined by optical and M/W dielectic properties of modulating crystal. The main conclusion of the analysis are: (1) CuCl, KDP may be used to produce 50% modulation over bandwidth of 10(GHz) with less than (watt) of modulating power. (2) The upper modulation frequency limit is set by a cutoff frequency which arises from finite width of optical beam.