• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.372-379
• /
• 2011

Estimating underwater target state variables(position, velocity, course, etc) is necessary to counteract threatening targets. In passive sonar systems, conventional target motion analysis(TMA) techniques using bearing and frequency measurements of an underwater target are widely introduced. However, it is not clear how conventional TMA techniques can be used if some of frequency measurements are unavailable during parts of the scenario, partially unavailable frequency measurements are common in the ocean with complicated acoustic conditions where frequency measurements often come and go. This paper proposes a new TMA algorithm, which is robust to partially unavailable frequency measurements, using the frequency measurements fusion method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.554-560
• /
• 2011

Single-frequency induction heating equipment caused by a hardening heat treatment process of the double investment in the issue and allow the heat treatment process in order to shorten the time from one process to work simultaneously on two kinds of processes that allow Simultaneous Dual Frequency(SDF) drive scheme technology are described. In this paper, we propose a dual way to drive a simultaneous dual-frequency drive scheme has been implemented. Through simulations and experiments, we can obtain the validity of the proposed inverter for dual-frequency control and power control.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3100-3102
• /
• 2000

In this paper, we propose to a robust frequency offset estimation method of OFDM signals. A carrier frequency offset may be decomposed into an integer multiple of the subcarrier spacing and a residual frequency offset. Fractional part of frequency offset is obtained by using the maximum likelihood estimation(MLE) method. And we use the correlation of the samples at the output of the discrete Fourier transform(DFT) to estimate integer part of frequency offset. The result shows that the estimation frequency offset is almost linear to frequency offset. We propose to an improved estimation error variance of the carrier frequency offset estimation. The proposed estimator has better performance than the conventional ones in terms of error variance and tracking range.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.450-457
• /
• 2012

In this paper, we designed low phase noise frequency synthesizer with compact size for High frequency band (Ku-band). The paper addresses merits and demerits of single loop and dual loop frequency synthesizer. The phase noise characteristics of the phase-locked loop frequency synthesizer were predicted based on the analysis for phase noise contribution of noise sources. The proposed model in this paper more accurately predicts the low phase noise frequency synthesizer with compact size for high frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.972-983
• /
• 1996

This paper proposes a new technique for frequency offset correction for OFDM systems on a frequency selective fading channel. Frequency offset in OFDM introduces interchannel interference among the multiple subcarriers of OFDM signal. To compensate the interference, this paper describes an algorithm with two stages:acquisition and tracking. At both stages, the proposed algorithm oversamples the received OFDM signal to obtain a couple of demodulated symbol sets. At acquisition stage the frequency offset is reduced to half or less of the intercarrier spacings by matching the sign pattern of each element of the sets. Next, at tracking stage the frequency offset is corrected with a frequency detector which is controlled by the correlation of the two sets. It is shown that the proposed algorithm can correct the frequency offset in the event of uncertainty in the initial offset that exceeds one half of the intercarrier spacing. In addition, the proposed algorithm is robust to transmitted symbols and channel characteristics by using oversampled symbol sets.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1247-1251
• /
• 2016

This study aims to investigate the effect of sampling frequency to the time domain and frequency domain analysis of pulse rate variability (PRV). Typical time domain variables - AVNN, SDNN, SDSD, RMSSD, NN50 count and pNN50 - and frequency domain variables - VLF, LF, HF, LF/HF, Total Power, nLF and nHF - were derived from 7 down-sampled (250 Hz, 100 Hz, 50 Hz, 25 Hz, 20 Hz, 15 Hz, 10 Hz) PRVs and compared with the result of heart rate variability of 10 kHz-sampled electrocardiogram. Result showed that every variable of time domain analysis of PRV was significant at 25 Hz or higher sampling frequency. Also, in frequency domain analysis, every variable of PRV was significant at 15 Hz or higher sampling frequency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.188-191
• /
• 2005

A common feature in various methods of optical interferometry for absolute distance measurements is the use of multiple monochromatic light components either in sequence or in parallel at the same time. Two or multiple wavelength synthesis has been studied though its performance is vulnerable to the frequency instability of the light source. Recently continuous frequency modulation is considered a promising method with availability of wide band tunable diode lasers, which also have frequency instability errors. We can lock frequencies of these third-party light sources to the modes of the femtosecond laser which is stabilized to the precision of the standard radio frequency. To this end, we have stabilized all the modes of the femtosecond laser to the atomic frequency standard by using powerful tools of frequency-domain laser stabilization.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.606-610
• /
• 2004

Although time-frequency analysis is useful for dispersive wave analysis, conventional methods such as the short-time Fourier transform do not take the dispersion phenomenon into consideration in the tiling of the time-frequency domain. The objective of this paper is to develop an adaptive time-frequency analysis method whose time-frequency tiling is determined with the consideration of signal dispersion characteristics. To achieve the adaptive time-frequency tiling, each of time-frequency atoms is rotated in the time-frequency plane depending on the local wave dispersion. To carry out this adaptive time-frequency transform, dispersion characteristics hidden in a signal are first estimated by an iterative scheme. To examine the effectiveness of the proposed method, the flexural wave signals measured in a plate were analyzed.

• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.91-98
• /
• 2019

Optical frequency comb generators have been investigated as a signal source capable of generating highly stabilized ultrafast pulse lasers. The precise control of the optical frequency comb spacing by RF clock signals has led to a revolutionary paradigm shift in the precise measurement of time and frequency. Optical frequency combs also have advantages such as stable frequency spacing, stable number of lines, and robustness. Owing to these characteristics, optical frequency combs have been applied to the fields of high precision optical clock, communication, spectroscopy, waveform generation, and astronomy. In this article, we introduce the properties (i.e., generation methods, advantages, and so on) of various optical frequency combs, and discuss the expected future technological trends and applications.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.4
• /
• pp.473-480
• /
• 2020

In this paper, we proposed a high frequency equivalent circuit considering parasitic impedance components for differential noise analysis on the input stage during DC-DC buck converter switching operation. Based on the proposed equivalent circuit model, we presented a method to measure parasitic impedance parameters included in DC bus plate, IGBT, and PCB track using the gain phase method of a network analyzer. In order to verify the validity of this model, a DC-DC prototype consisting of a buck converter, a signal analyzer, and a LISN device, and then resonance frequency was measured in the frequency range between 150 kHz and 30 MHz. The validity of the parasitic impedance measurement method and the proposed equivalent model is verified by deriving that the measured resonance frequency and the resonance frequency of the proposed high frequency equivalent model are the same.