• 제목/요약/키워드: Frequencies

검색결과 10,469건 처리시간 0.03초

청각적 피드백이 기본주파수에 주는 영향: 와우이식 아동, 보청기 사용아동, 및 건청아동 간의 비교 (The Effect of Auditory Feedback on Fundamental Frequencies: The Comparision Among Children with Cochlear Implantation, With Hearing Aids, and With Normal Hearing)

  • 윤미선;김종선
    • 대한음성학회:학술대회논문집
    • /
    • 대한음성학회 2003년도 5월 학술대회지
    • /
    • pp.105-108
    • /
    • 2003
  • The purpose of this paper was to evaluate the effect of auditory feedback on fundamental frequencies in prelingulally deaf children. Participants totaled three groups of sixty children: deaf children with cochlear implantation(CI), deaf children with hearing aids (HA), and children with normal hearing(NH). Fundamental frequencies were measured during sustained phonation of /a/. There were statistically significant differences of fundamental frequencies across the groups(p<.01). In post hoc analysis, HA and NH group showed statistically significant differences, but CI group didn't. In correlation analysis between Fo and the chronological age, there were significant negative tendencies in CI and NH group, but not in HA group. The characteristics of fundamental frequencies in CI group were found similar to NH group than HA group in this study. This could be understood as the effect of relatively sufficient auditory feedback after cochlear implantation.

  • PDF

Vibration analysis of generalized thermoelastic microbeams resting on visco-Pasternak's foundations

  • Zenkour, Ashraf M.
    • Advances in aircraft and spacecraft science
    • /
    • 제4권3호
    • /
    • pp.269-280
    • /
    • 2017
  • The natural vibration analysis of microbeams resting on visco-Pasternak's foundation is presented. The thermoelasticity theory of Green and Naghdi without energy dissipation as well as the classical Euler-Bernoulli's beam theory is used for description of natural frequencies of the microbeam. The generalized thermoelasticity model is used to obtain the free vibration frequencies due to the coupling equations of a simply-supported microbeam resting on the three-parameter viscoelastic foundation. The fundamental frequencies are evaluated in terms of length-to-thickness ratio, width-to-thickness ratio and three foundation parameters. Sample natural frequencies are tabulated and plotted for sensing the effect of all used parameters and to investigate the visco-Pasternak's parameters for future comparisons.

Computer visualization approach for rotating FG shell: Assessment with ring supports

  • Al Thobiani, Faisal;Khadimallah, Mohamed A.;Hussain, Muzamal;Mohamed, Gar Al-Nabi Ibrahim;Ghandourah, Emad
    • Computers and Concrete
    • /
    • 제28권6호
    • /
    • pp.559-566
    • /
    • 2021
  • In this paper, frequency analysis has been done for functionally graded cylindrical shell with ring supports using Sander's shell theory. The vibrations of rotating cylindrical shells are analyzed for different physical factors. The fundamental natural frequency is investigated for different parameters such as: ratios of length-to-diameter ring supports. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. The frequencies for different position of ring supports are obtained in the form of bell shaped. The backward frequencies increases and forward frequencies decrease on increasing the rotating speed. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

고낙차 수력 펌프/터빈 런너에 대한 진동 모드해석 및 실험 (Modal Analysis and Testing of a High Head Pump/Turbine Runner)

  • 류석주;하현천
    • 소음진동
    • /
    • 제8권6호
    • /
    • pp.1062-1068
    • /
    • 1998
  • This paper describes the vibration characteristics of a high head pump-turbine runner. with nine blades and an outer diameter of 4.410 mm. of the pumped storage power plant. Mode shapes and natural frequencies were obtained by means of both the finite element analysis and modal testing. both in air and in water. The natural frequencies in air were calculated using the finite element method by ANSYS software. In order to confirm calculation results. the natural frequencies and mode shapes of the runner were measured using a hydraulic exciter both in air and in water. Natural frequencies of the pump-turbine runner were found at 174. 310 Hz in air, and at 107. 184 Hz in water. The first mode shape is flat plate mode with two nodal diameter and the second one is also flat plate mode with three nodal diameter. It can be shown that the natural frequencies of the pump-turbine runner in water is reduced approximately 40 % due to additional mass effect. Natural frequencies in air predicted by ANSYS software are in good agreement with test results.

  • PDF

고유진동수의 실험값을 사용한 복합재 적층판의 동적 모델링 개선 (Dynamic model updating of the laminated composite plate using natural frequencies measured from modal test)

  • 홍단비;유정규;박성호;김승조
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
    • /
    • pp.340-346
    • /
    • 1998
  • In order to improve the prediction of dynamic behavior in structures, several lower vibration modes from FFT analysis through experiments are used to update the mechanical properties followed by the updated frequencies from numerical analysis. Performance index consists of the sum of error norms between the chosen frequencies and corresponding frequencies from numerical analysis. As an updating process of the natural frequencies, the optimization algorithm based on conjugate gradient method is adopted. The gradient of performance index is calculated using the sensitivity of selected eigenvalues with respect to each design parameter. The mechanical properties of lamina, E$\_$l/, E$\_$2/, .nu.$\_$12/ and G$\_$12/, are design parameters for the updating process. The proposed method is applied to predict the dynamic behavior of composite laminated plates of [0]$\_$8T/ and [.+-.45]$\_$2S/ separately or interchangeably. Also, the mixed case for [0]$\_$8T/ and [.+-.45]$\_$2S/ is exarm'ned to check the possibility for the improved prediction generally. The good agreement is obtained between the measured frequencies and the numerical ones. Based on the results for all the cases studied, the proposed approach has a clear potential in characterizing the mechanical properties of composite lamina.

  • PDF

Damage assessment in periodic structures from measured natural frequencies by a sensitivity and transfer matrix-based method

  • Zhu, Hongping;Li, Lin;Wang, Dansheng
    • Structural Engineering and Mechanics
    • /
    • 제16권1호
    • /
    • pp.17-34
    • /
    • 2003
  • This paper presents a damage assessment procedure applied to periodic spring mass systems using an eigenvalue sensitivity-based method. The damage is directly related to the stiffness reduction of the damage element. The natural frequencies of periodic structures with one single disorder are found by adopting the transfer matrix approach, consequently, the first order approximation of the natural frequencies with respect to the disordered stiffness in different elements is used to form the sensitivity matrix. The analysis shows that the sensitivity of natural frequencies to damage in different locations depends only on the mode number and the location of damage. The stiffness changes due to damage can be identified by solving a set of underdetermined equations based on the sensitivity matrix. The issues associated with many possible damage locations in large structural systems are addressed, and a means of improving the computational efficiency of damage detection while maintaining the accuracy for large periodic structures with limited available measured natural frequencies, is also introduced in this paper. The incomplete measurements and the effect of random error in terms of measurement noise in the natural frequencies are considered. Numerical results of a periodic spring-mass system of 20 degrees of freedom illustrate that the proposed method is simple and robust in locating single or multiple damages in a large periodic structure with a high computational efficiency.

Controlling Linkage Disequilibrium in Association Tests: Revisiting APOE Association in Alzheimer's Disease

  • Park, Lee-Young
    • Genomics & Informatics
    • /
    • 제5권2호
    • /
    • pp.61-67
    • /
    • 2007
  • The allele frequencies of markers as well as linkage disequilibrium (LD) can be changed in cases due to the LD between markers and the disease allele, exhibiting spurious associations of markers. To identify the true association, classical statistical tests for dealing with confounders have been applied to draw a conclusion as to whether the association of variants comes from LD with the known disease allele. However, a more direct test considering LD using estimated haplotype frequencies may be more efficient. The null hypothesis is that the different allele frequencies of a variant between cases and controls come solely from the increased disease allele frequency and the LD relationship with the disease allele. The haplotype frequencies of controls are estimated using the expectation maximization (EM) algorithm from the genotype data. The estimated frequencies are applied to calculate the expected haplotype frequencies in cases corresponding to the increase or decrease of the causative or protective alleles. The suggested method was applied to previously published data, and several APOE variants showed association with Alzheimer's disease independent from the APOE ${\varepsilon}4$ variant, rs429358, regardless of LD showing significant simulated p-values. The test results support the possibility that there may be more than one common disease variant in a locus.

ANALYSIS OF THE FIT IN THE IMPLANT PROSTHESIS USING A LASER DISPLACEMENT METER AND THREE-DIMENSIONAL FINITE ELEMENT METHOD

  • Kwon Ho-Beom;Kim Yung-Soo;Kim Chang-Whe
    • 대한치과보철학회지
    • /
    • 제39권6호
    • /
    • pp.611-624
    • /
    • 2001
  • A precise fit of the implant prosthesis is one of the most important factors in preventing mechanical complications. To analyze the degree of the misfit of implant prosthesis, a modal testing experiment was accomplished. And. to interpret the modal testing analysis mathematically, three-dimensional finite element models were established. In the experimental modal testing analysis, with a laser displacement meter, FFT analyzer, impact hammer, etc., natural frequencies of the models with various degree of prosthesis fit were determined after the frequency response function were calculated. In the finite element analysis, the natural frequencies and mode shapes of the models which simulated those of experimental modal testing were computed. The results were as follows: 1. Natural frequencies of the prosthesis-abutment were related to the contact state between components. 2. In the modal testing experiment, the natural frequencies increased from $50{\mu}m$ to $200{\mu}m$ gap and reached a plateau. 3. In the finite element analysis, the natural frequencies decreased gradually according to the in crease of the gap size. 4. In the finite element analysis, the mode shapes of model 1 with misfitting prosthesis showed different patterns from those without misfitting prosthesis. 5. The devices including a laser displacement meter used in this study were useful for measuring the natural frequencies of an implant prosthesis which had various degrees of fit.

  • PDF

음파 가진을 이용한 확산 화염의 연소 배기와 화염 내부의 국소 NO 농도 변화 특성에 대한 실험적 연구 (Experimental study of the combustion emission of diffusion flame and local NO concentration change characteristics in the flame by acoustic excitation)

  • 배상훈;오상헌
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.137-142
    • /
    • 2001
  • The effects of acoustic excitation with various frequencies for combustion air as well as fuel on the combustion emission and local NO concentration in diffusion flame were investigated experimentally. It was studied to investigate the effects of combination between four frequencies for the fuel and various frequencies for the combustion air. The better characteristic for NO emission was revealed by acoustic exciting with frequencies for the air and the fuel excited at 0Hz and 120Hz and the generation of CO was decreased at low frequency for fuel and the excited combustion air. The amount of combustion emission could be controlled by acoustic exciting of the combustion air. And when both fuel and air are excited by some frequencies, the diffusion flame was affected by frequency which excited fuel in the middle of the flame and by air-exciting frequency at both sides of the flame. The local NO in the flame was generated much less at the condition that fuel was excited by frequencies than the condition was not.

  • PDF

정유연성 지배주파수를 이용한 매개변수 인식기법 (Parameter Identification Using Static Compliance Dominant Frequencies)

  • 남동호;최상현;박수용
    • 한국지진공학회논문집
    • /
    • 제9권1호통권41호
    • /
    • pp.71-78
    • /
    • 2005
  • 본 논문에서는 정유연성 지배주파수를 이용한 개선된 매개변수 인식기법이 제안되었다. 정유연성 지배주파수를 이용할 경우 주파수응답함수에서 고유주파수 보다 다수의 정보를 추출할 수 있어 매개변수 인식의 성능을 향상시킬 수 있는 장점이 있다. 정유연성 지배주파수를 매개변수 인식에 이용하기 위하여 기존의 고유주파수 민감도에 기반한 구조계 인식기법이 확장되었다. 정유연성 지배주파수의 이용을 통한 매개변수 인식의 성능향상은 수치예제를 통해 증명하였다. 수치예제는 스프링과 질량으로 이루어진 간략 모델이 사용되었으며, 고유주파수 만을 이용하여 구한 인식값과 비교한 결과 보다 정확한 매개변수 값의 인식이 가능함을 알 수 있었다.