• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.38-44
• /
• 2008

The freight vehicle is mostly used to transport the fruit. Shock and impact generated by the freight vehicle may give serious damage to fruits hence to reduce the fruits damage, the optimum packaging design during transportation by vehicle is required. In order to design the packaging system for fruit transportation optimally, the comprehension of characteristic for vibration and shock acting on vehicles under various road conditions and loading methods is required. This research was performed to analyze the shock characteristics, acceleration level and power spectral density (PSD) of the fruit transportation vehicles under several travel roads and positions. The vibration signal was measured and analyzed at the transportation vehicle operating on the road of three different surface conditions. The maximum acceleration was measured at the rear-end of the vehicle, and the acceleration in the direction of up-and-down (z-axis) was much greater than those in the directions of back-and-forth (x-axis) or right-and-left (y-axis). The peak acceleration in the direction of up-and-down (z-axis) at the vehicle driving on the expressway, the local road paved with concrete, and unpaved local road were 5.3621 G, 8.232 G, and 14.162 G respectively. PSD at 2.44 Hz showed maximum value at all road conditions. The maximum values of PSD on the expressway, a local road paved with concrete, and unpaved local road were 0.0075222 $G^2/Hz$, 0.058655 $G^2/Hz$, and 0.24598 $G^2/Hz$ respectively. The value of PSD decreased with an increase of the vibration frequency of the transportation vehicle. In most cases, the vibration frequency was below 20 Hz during transportation.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.484-490
• /
• 2000

The freight wagon with weld fabricated 1-piece bogies, which was developed to increase operating speed, reveals its difficulties in maintenance. The weld-fabricated bogies were composed of two-stage coil spring and dry friction damping mechanism. The inborn wear parts and rather complicated structure mattes bogie maintenance difficult. In order to relieve this difficulties, the application of maintenance free rubber suspension is proposed by bogie maunfacturer, Taeyang Precision Limited. This study was conducted to determine design parameters of proposed rubber suspension by means of vehicle dynamic simulation and parametric study. The target critical speed of bogie was set over 150km/h for the preparation of further speed-up of freight wagon.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.152-166
• /
• 2022

This study analyzed the causal relationship among operating characteristics of commercial freight vehicles, dangerous driving behaviors, and traffic accident risk. The study applied the existing accident cause and prevention theory to arrive at this relationship. Data related to working characteristics of driver, driving experience, driving ability, driving psychology, vehicle characteristics (size), dangerous driving behavior, and traffic accidents were collected from 303 commercial freight vehicle drivers. Working characteristics and dangerous driving behavior data are based on the driver's digital driving record. The traffic accident data is based on the insurance accident data reflecting actual traffic accidents. First, a structural equation model was built and verified using the model fitness index. Then, the developed model was used to analyze the causal relationship between multiple independent and dependent variables simultaneously. Four dangerous driving behaviors (sudden deceleration, sudden acceleration, sudden passing, and sudden stop) were found to be highly related to traffic accidents. The results further indicate that it is necessary to establish a safety management policy and intensive management for small-sized freight vehicles, drivers with insufficient driving ability, and drivers with dangerous driving behaviors. Such policy and management are expected to reduce traffic accidents effectively.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.91-105
• /
• 2023

This paper identified the difference in perception of the consignment system between the freight company and the consigned vehicle owners, derived factors that urgently need to improve the difference in perception, and presented the basis for establishing a management model based on this. A management model based on the difference in perception of consigned borrowers was established, and research hypotheses were established to conduct reliability, validity, and confirmatory factor analysis, path analysis, and mediation effect verification. As a result of the analysis, out of 58 questions, 56 of the total 65 questions showed a difference in perception of the consignment system between trucking companies and consigned vehicle owners, and the questions were input as management model factors. As a result of conducting confirmatory factor analysis, path analysis, and mediating effect verification using only recognition data, 5 hypotheses were adopted, and it was analyzed that the factor had no mediating effect. It can be analyzed that the appropriateness of the compensation system affects the improvement of each other's relationship, and the improvement of each other's relationship leads to the improvement of transportation services. However, since the mediating effect was rejected because it was not significant, this effect should not be exaggerated.

• Journal of the Korean Geographical Society
• /
• v.45 no.6
• /
• pp.766-787
• /
• 2010

This study seeks to clarify the process of development and the change of freight flows in the influence areas of Pyeongtaek and Dangjin Port, which opened lately. The results of analysis are as follows: from development period to growth period, the relation between the development of the port and the change of the hinterland and foreland shows no great change and the freight concentration rates of the first hinterland and foreland decreased, but those of periphery region increased. While the composition rate of import and export freight of vehicle, fuel and energy decreased, the rate of imported freights (iron or steel, other textile articles, rag and organic compounds) and exported freight (manufacture of basic metals) increased. The reasons for such changes in influence areas of port were the increase of export to China and the U.S.A. in the development period, the increase of import from China in the growth period and the diversification of nations from which fuel and energy were imported.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2020

This study examined the braking characteristics of a heavy haul freight train with P4a distribution valves applied to domestic high-speed freight trains. A freight train was composed of 50 cars, which is twice the normal operation. A braking test was performed to confirm the characteristics of the braking of a heavy haul. The brake cylinder pressures were measured for emergency and service braking on the 1st, 10th, 20th, 30th, and 50th cars. Because the brake signal is transmitted to the pressure through the braking tube connected to the end of the train, the rear vehicle is braking later than the vehicle ahead. Therefore, it is necessary to predict the brake pressures in all cars in a train to supplement the results of the limited tests and calculate the braking distance. The pressure in each car was determined using empirical models of linear interpolation, stepwise, and exponential models, which provided reliable information. The predictive results of the empirical models were compared with the measured results, and the exponential model was predicted relatively accurately. These results are expected to contribute to the safe operation of heavy haul freight trains and can be used to predict the braking distance and calculate the level of impact between vehicles during braking.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.84-89
• /
• 2001

Studied in this paper was the vehicle dynamics simulation for development of single axle bogie using the multi-body dynamics simulation program(VAMPIRE). Single axle bogie vehicle is to the crew of freight vehicle. Method of analysis for dynamic behaviors of vehicle having single axle bogie was carried by UIC(International Union of Railways) code 518 and results of analysis were presented in terms of the hunting stability and the derailment ratio and the sum of wheel/rail lateral force. The results of analysis meet the criteria proposed by UIC.

• IE interfaces
• /
• v.20 no.4
• /
• pp.525-538
• /
• 2007

The importance of efficient container transportation becomes more significant each year due to the constant growth of the global marketplace, and studies focusing on shipping efficiency are becoming increasingly important. In this paper, we propose an approach for vehicle scheduling that decreases the number of vehicles required for freight commerce by analyzing and scheduling optimal routes. Container transportation can be classified into round and single-trip transportation, and each vehicle can be linked in a specific order based on the vehicle state after completing an order. We develop a mathematical model to determine the required number of vehicles with optimal routing, and a heuristic algorithm to perform vehicle scheduling for many orders in a significantly shorter duration. Finally, we tested some numerical examples and compared the developed model and the heuristic algorithm. We also developed a decision support system that can schedule vehicles based on the heuristic algorithm.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.2
• /
• pp.39-49
• /
• 2006

Forklift achieves transportation of freight and continues loading and unloading work repeatedly long for hours in industry spot. Therefore, drivers feel tired make a mistake for wrong operation of vehicle caused by continuous work. These components are resulted in CTDs, some industrial accident. That is the forklift need to ergonomics access. So, in this paper, requirements of forklift user were abstracted using questionnaire, produced important design factor for pedal and lever using QFD(Quality Function Deployment), and then suggested ergonomic considerations for industrial accident prevention.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.458-467
• /
• 2017

The expressway of the Korea has an important role in freight movement because 76 percent of the commodity is transported by trucks. However, there has been few indices on the role of expressways regarding freight transportation and truck traffic. The objective of this study is to propose four freight transportation related indices using ITS-related system such as TCS and HS-Wim: total truck's travel miles ($veh{\cdot}km/year$), total freight transport miles ($ton{\cdot}km/year$). efficiency of truck's travel ($veh{\cdot}km/km$), and efficiency of freight movement ($ton{\cdot}km/km$). These truck and freight related indices were estimated and compared by two different data sources: traffic volume data using VDS and OD data using TCS. These indices were designed to estimated on real time and updated every day and month.