• Food Science of Animal Resources
• /
• v.18 no.2
• /
• pp.164-175
• /
• 1998

The objective of this study was to investigate the effects of freezing rate on ice crystal size and freeze-drying rate. Our experiments were carried out with self-manufactured freeze-dryer. Gelatin gels (2% w / w, 80$\times$20mm) were frozen unidirectionally (Neumann's model) from the bottom at -45, -30, -20, and -15$^{\circ}C$ and followed with freeze-drying. Under the upper conditions we measured freezing rate and the change of temperature and pressure during freeze drying. Freeze-dried gelatins were cut horizontally into 5 mm thickness from the bottom and measured their pore sizes. Also freeze-drying rate(primary drying) is estimated by measuring the temperature of sample and pressure of vacuum chamber. During freeze-drying, profiles of pressure and temperature were shown constant tendency regardless of freezing temperature and we could expect the end-point of freeze drying by considering pressure and temperature together. In temperature profiles, the point which temperature increased significantly was observed during freeze-drying. There is no relationship between freeze temperature and drying rate of primary drying in our model system. As freezing temperature increased, ice crystal size(X*) which correspond to 63.2% of cumulative frequency was increased and at the same freezing temperature ice crystal size(X*) was decreased with distance from the bottom of the sample. Freezing conditions have a strong influence on the quality of the final freeze-dried products in freeze-drying system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.104-111
• /
• 1997

The freezing phenomenon of saturated water with the supercooled region in a horizontal circular cylinder has been studied experimentally by using the holographic real time interferometry technique. From the experiments, it was found that there were three types of freezing patterns. The first is the annular ice layer growing from the cylinder surface at a high cooling rate; the next is the asymmetric ice layer at a moderate cooling rate; and the last is the instantaneous ice layer growth over the full region at lower cooling rate. As the water was coolde from room temperature to the subfreezing point passing through the density inversion point, the freezing pattern was largely affected by the inversion phenomenon, which had much effected the free convection and was susceptible to influences from the cooling rate. When the cooling rate is high, supercooling energy is released before the water is sufficientry mixed by free convection. On the other hand, when the cooling rate is low, there is much time for the water to be mixed by free convection. This seems to be the reason why the different ice layer growths occur.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.200-204
• /
• 1988

Cryoprotectivity of garlic bulb caused by the freezing point depression was studied to establish the possibility of preserving the garlic at subzero temperature. Freezing point of fresh garlic tissue showed almost consistency, ranged from $-4^{\circ}C\;to\;-5^{\circ}C$ regardless of the cultivation area. However, the freezing point was varied with the postharvest treatment and storage conditions, so that freezing point of fresh garlic was $-3.5^{\circ}C$ before predrying, $-4.5^{\circ}C$ after predrying, $-5.5^{\circ}C$ after 5 months of storage and that of dead tissue was $-2.5^{\circ}C$. Freezing lethality of fresh garlic bulb preserved at -4, -6.5 and $-15.5^{\circ}C$ were 0, 10 and 70%, respectively. From these results, it was concluded that critical lethal temperature might be $-5{\sim}-6^{\circ}C$. The respiration rate of garlic bulb decreased with lowering the storage temperature down to $-4^{\circ}C$. $Q_{10}$ value was 2 at the temperature range of $-4{\sim}-5^{\circ}C$, 3 at $5{\sim}15^{\circ}C$ and 1.2 at $15{\sim}37^{\circ}C$. In conclusion, optimal temperature for garlic storage was $-4^{\circ}C$ when considering the cryoprotectivity of garlic bulb at subzero temperature.

• Food Science of Animal Resources
• /
• v.34 no.1
• /
• pp.33-39
• /
• 2014

This study investigates the effects of the gelatin concentration (10-40%, w/v), freezing temperatures (from $-20^{\circ}C$ to $-50^{\circ}C$) and freezing methods on the structural and physical properties of gelatin matrices. To freeze gelatin, the pressure-shift freezing (PSF) is being applied at 0.1 (under atmospheric control), 50 and 100 MPa, respectively. The freezing point of gelatin solutions decrease with increasing gelatin concentrations, from $-0.2^{\circ}C$ (10% gelatin) to $-6.7^{\circ}C$ (40% gelatin), while the extent of supercooling did not show any specific trends. The rheological properties of the gelatin indicate that both the storage (G') and loss (G") moduli were steady in the strain amplitude range of 0.1-10%. To characterize gelatin matrices formed by the various freezing methods, the ice crystal sizes which were being determined by the scanning electron microscopy (SEM) are affected by the gelatin concentrations. The ice crystal sizes are affected by gelatin concentrations and freezing temperature, while the size distributions of ice crystals depend on the freezing methods. Smaller ice crystals are being formed with PSF rather than under the atmospheric control where the freezing temperature is above $-40^{\circ}C$. Thus, the results of this study indicate that the PSF processing at a very low freezing temperature ($-50^{\circ}C$) offers a potential advantage over commercial atmospheric freezing points for the formation of small ice crystals.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.205-212
• /
• 1988

The effect of physicochemical characteristics on the freezing point depression of garlic bulb was studied to examine the reasons of cryoprotectivity in garlic bulb stored at subzero temperature. The composition of fresh garlic was characterized by having high soluble solids($40^{\circ}$ Brix; 90% on dry basis), comparing with $10^{\circ}$ Brix in case of other fruits and vegetables. Soluble solids were composed of 70% sugars, 20% protein, and 10% insoluble solids(including 3% of ash, 3% of crude fiber, and 4% of fat). The main component of sugars in garlic was fructosan with 1-29 degree of polymerization(D.P) and the fructosan of 4-5 D.P was over 50% of total fructosan. Freezing point of garlic bulb, which is a parameter of cryoprotectivity, was depressed as the concentration of soluble solids increased, and as the D.P value decreased in the same concentration of soluble solids.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.163-168
• /
• 1994

If the concrete is exposed below freezing point of the outer temperature before hardened, the quality of the concrete will be lowered after hardened. Anti-freezing agent which doesn't corrode the steel bar and doesn't generate the alkali-aggregate reaction by noncholride recently developed in Japan and Northern Europe. But the effects of these agents are rarely known. Therefore, this study is desigend for analyzing the freezing properties at the condition of solution of solution and cement paste. And this study aims to present the reference data for practical use of the concrete works using anti-freezing agent.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.682-687
• /
• 1999

The destruction of tissues by volume increase at food freezing is accepted as one of the factor responsible for quality damage. For this reason, the internal pressure developed in meats were investigated with a pressure transducer during freezing, frozen storage and thawing. Increasement of 6.33% for volume and $942.17\;kg/cm^2$ for density at $-20^{\circ}C$ for beef were shown. In quick and slow freezing of beef, internal pressure reached to highest point after reached to the lowest point at initial of the zone of ice crystal formation. The internal pressure was approximately $8{\sim}10\;psig$ and pressure difference was about 1 psig, which was bigger in immersion freezing than that of still-air freezing. During frozen storage of pork, internal pressure of $1.84{\sim}2.32\;psig$ occurred repeatedly as a function of sample weight at material temperature difference of ${\pm}1^{\circ}C$. The internal pressure during thawing of pork was decreased slowly after rapid increase to the maximum for less than 5min at the beginning of thawing. Internal pressure value at thawing was higher than that at freezing in most cases. Internal pressure of beef with thermal equalized freezing was about $1{\sim}4\;psig$, which was lower than that of non-thermal equalized freezing. Also, freezing time was shortened to $10{\sim}20%$.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.469-473
• /
• 2007

The optimal formula for non-frozen pound cake was sought using a central composite design with a quadratic model, by response surface methodology (RSM). Behavior on supercooling, freezing time, theological properties, and sensory attributes of pound cake were studied by using various concentrations of sugar, sorbitol, and glycerol. The freezing temperature of standard pound cake was $-16.16^{\circ}C$. The hardness, freezing point temperature, and sensory properties were shown as a quadratic relationship whereas moisture content was analyzed by a linear model. Optimized formula for non-frozen cake were suggested to include (sugar:sorbitol:glycerol) 77.6:0.0:20.4, 60.0:32.8:16.4, and 70.8:11.2:19.6 (all % of total sugar) by RSM. The freezing tines of optimized non-frozen pound cake were reduced by $27{\sim}45%$. The freezing Points of optimized pound cake were depressed below $-20^{\circ}C$. Sorbitol and glycerol may be used as cryoprotectants and preserve the desired sensory attributes of pound cake at low temperatures.

• Food Science of Animal Resources
• /
• v.33 no.6
• /
• pp.723-729
• /
• 2013

In this study, the quality characteristics due to the influence of various thawing methods on electro-magnetic and air blast frozen beef were examined. The loin and round of second grade Hanwoo were sliced into 5-7 cm thickness and packed with aerobic packaging. The packaged beef samples, which were frozen by air blast freezing at $-45^{\circ}C$ and electro-magnetic freezing at $-55^{\circ}C$, were thawed by 4 thawing methods with refrigeration ($4{\pm}1^{\circ}C$), room temperature (RT, $25^{\circ}C$), cold water ($15^{\circ}C$), and microwave (2450 MHz). These samples were thawed to the point, which were core temperature reached $0^{\circ}C$. Analyses were carried out to determine drip and cooking loss, water holding capacity (WHC), moisture contents and sensory evaluation. Frozen beef thawed by microwave indicated a lower drip loss (0.66-2.01%) than the other thawing methods (0.80-2.50%). Cooking loss after electro-magnetic freezing indicated 52.0% by microwave thawing for round compared with 41.8% by refrigeration, 50.1% by RT, and 50.8% by cold water. WHC thawing by microwave with electro-magnetic freezing didn't showed any difference depending on the thawing methods, while moisture contents was higher thawing by microwave with electro-magnetic freezing than refrigeration (71.9%), RT (75.0%), and cold water (74.9%) for round. The texture of sensory evaluation for round thawed by microwave result was the highest than refrigeration (4.7 point), RT (6.4 point) and cold water (6.6 point), while sensory evaluation was no significant difference. Therefore, it was shown that microwave thawing is an appropriate way to reduce the deterioration of meat quality due to freezing.

• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.125-130
• /
• 2003

This study was carried out to investigate the thermo-physical properties and design Freezing time prediction model from data of freezing test of Kimchi. Density of Kimchi were measured as 1001.9 ${\pm}$0.03 kg/㎥ at unfrozen state, 987.0 ${\pm}$0.07 kg/㎥ at frozen state and volume of the Kimchi expanded 4.67% at -l5$^{\circ}C$. Initial freezing point of Kimchi and seasoning were -4.0$^{\circ}C$ and -2.5$^{\circ}C$, respectively. Freezing ratio of Kimchi were estimated more than 50％ at -5.0$^{\circ}C$, more than 75% at -l0$^{\circ}C$ and approximately 90% at -25$^{\circ}C$. To obtain equation for freezing time prediction of Kimchi, freezing time(Y) was regressed against the reciprocal( $X_3$) of difference of initial freezing point and freezing medium temperature, reciprocal( $X_4$) of surface heat transfer coefficient, the initial temperature( $X_1$) and thickness( $X_2$) of samples. As results of the multiple regression analysis, equations were obtained as follows. Y$_{kimchi}$=3.856 $X_1$+13982.8 $X_2$+8305.166 $X_3$+ 3559.181 $X_4$-639.189( $R^2$=0.9632). These equations shown better results than previous models, and the accuracy of its was very high as average absolute difference of about 10% in the difference between the fitted and experimental results.