• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.71-82
• /
• 2012

This research was carried out to estimate annual erosion and retreat rates by using datum-point and to identify the characteristics and causes of seasonal variations of sea-cliff slope in Pado-ri, Taean-gun. In the result, the erosion and retreat rates of sea-cliff were increased from spring to summer. The rates were increased rapidly between August and October, caused by the effects of extreme weather events such as severe rainstorms and typhoons, etc. Since then, the erosion and retreat rates of sea-cliff were decreased gradually, but the rates were increased again in winter due to the storm surge and mechanical weathering resulting from the repeated freezing and thawing actions of bed rocks. The factors that affect erosion and retreat rates of sea-cliff include the number of days with antecedent participation and daily maximum wave height. In particular, it turned out that the erosion is accelerated by strong wave energy during storm surges and typhoons. The annual erosion and retreat rates of study area for the past two years(from May 2010 to May 2012) were approximately 44~60cm/yr in condition of differences in geomorphological and geological characteristics at each point. These erosion and retreat rates were found to be higher than results of previous researches. This is caused by coastal erosion forces strengthened by extreme weather events. The erosion and retreat process of sea-cliff in the study area is composed by denudation of onshore areas in addition to marine erosion(wave energy).

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.23-36
• /
• 2012

This study aims to think about the problem of dolmens: the reasons for the presence of dolmens and how to construct it, at the point of view of geographical and geomorphological. The subjects of this study is the dolmens which locate between at Dogok Hyosanri and Chunyang Daesinri Hwasoon-gun, Jeonlanamdo. The study areas in Hyosanri, Daesinri has been observed as follows. First, the long axis direction of Dolmen upper stone and the slope one are the same. Second, tor, block stream, hockey stick, etc. Third, Composition of the soil silt> sand> clay is distributed in the order. Forth, The soil of high quality silt and the roundness of angular, sub-angular-level and the high frequency, peaks of quarts and illite clay minerals show. Fifth, in the result of $SiO_2/Al_2O_3$, $SiO_2/R_2O_3$, and CIA(Chemical Index of Alteration), Hyosanri, Daesinri areas show mechanical weathering was dominant and chemical weathering environment was not being progressed. The blocks used in construction of dolmens had moved to the bottom of slopes by mass movement such as solifluction then them which had been placed in the position seem to be used by people of Bronze. Based on the above results, the process of construction of dolmens can be estimated as follows. They would dig up the ground under the upper stone of dolmens, put the supporting stone in the place, then dig up earth, place into remains, close the obturating stones, then heal up earth.

• Journal of Animal Science and Technology
• /
• v.63 no.1
• /
• pp.36-45
• /
• 2021

Presently, there is an increased demand for livestock products all over the world which has led to more devotion on improving livestock population. Although goats have been bred for a long time in Korea, but there is not much research conducted on traditional Korean black goat (Capra hircus coreanae) compared to other livestock populations. Mutton consumption has been dramatically changing from medicinal use to edible meat and this trend directs the black goat populations declining and also mutton import quantities are increasing consistently. The present study introduced a new estrus synchronizing technique with subsequent artificial insemination (AI) for Korean black goats to enable crossbreeding with non-native breeds for the small or subsistent farmers. Our data highlighted that, the percentage of motile sperm from the electro-ejaculated samples declined significantly after freezing and melting. In addition, the sperm motility significantly declined with regard to sperm incubation period (0, 5, 60, and 120 min at 37℃) and was negatively correlated (64.2 ± 7.9%, 63.3 ± 5.8%, 49.9 ± 6.3%, and 35.9 ± 7.6%, respectively) in frozen-thawed sperm samples. Moreover, the E2 levels were unchanged even 24 h after controlled internal drug releas (CIDR) withdrawal. But, 48 h and 72 h after CIDR removal, E2 levels increased significantly. These data helps us to consider the two time points for AI; CIDR removal after 24 h, at which E2 decreases, and after 48 h, as the time at which progesterone increases. Additionally, the AI after 48 h of CIDR removal group exhibited significantly higher pregnancy and parturition rates (42.9%) compared to AI after 24 h after CIDR removal 28.6% group. In conclusion, these studies will propose an optimal estrus synchronisation process with subsequent timing of AI and also will promote the Korean black goat breeding industry.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.2019-2027
• /
• 2013

In this study, we tried to develop a coating agent for the fresh-cut fruits used in cakes. First, the coating agent mixing ratios of sugar, pectin, sodium alginate, carrageenan, xanthan gum, vitamin C, and purified water were selected to be 55, 2, 2, 0.04, 0.1, 0.05, and 40.81% (w/w), respectively. In a freeze-thaw stability of the coating agent, the viscosity remained constant for 3 cycles of freezing and thawing repetition process, but showed a slightly decreasing trend in the 4th repetition process (P<0.05). On the other hand, the sugar content, pH, and chromaticity remained constant even in the 4th repetition process. Pineapple coated with the coating agent had smaller weight loss, hardness changes, and total bacteria distribution compared to the uncoated pineapple (P<0.05). In the chromaticity, both of the two pineapples experienced browning with increasing storage duration, as L value decreases and b value increases. However, when the color difference was compared, the progress of browning for the uncoated pineapple was faster than the coated pineapple. Also, the progress of browning at $4^{\circ}C$ was found to be slower than the progress of browning at $25^{\circ}C$. Therefore, the storage stability of the fresh-cut fruits could be improved by coating the fresh-cut fruits for cakes with the coating agent and storing at a low temperature, which would contribute to extending the shelf-life of cakes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1200-1206
• /
• 2015

The major target for drug discovery, G-protein coupled receptor (GPCR) is involved in many physiological activities and related to various diseases and disorders. Among experimental techniques relating to the GPCR drug discovery process, various cell-based screening methods are influenced by cell conditions used in the overall process. Recently, the utilization of frozen cells is suggested in terms of reducing data variation and cost-effectiveness. The aim of this study is to evaluate various conditions in cell freezing such as temperature conditions and storage terms. The stable cell lines for calcium sensing receptor and urotensin receptor were established followed by storing cultured cells at $-80^{\circ}C$ up to 4 weeks. To compare with cell stored at liquid nitrogen, agonist and antagonist responses were recorded based on the luminescence detection by the calcium induced photoprotein activation. Cell signals were reduced as the storage period was increased without the changes in $EC_{50}$ and $IC_{50}$ values $EC_{50}:3.46{\pm}1.36mM$, $IC_{50}:0.49{\pm}0.15{\mu}M$). In case of cells stored in liquid nitrogen, cell responses were decreased comparing to those in live cells, however changes by storage periods and significant variations of $EC_{50}/IC_{50}$ values were not detected. The decrease of cell signals in various frozen cells may be due to the increase of cell damages. From these results, the best way for a long-term cryopreservation is the use of liquid nitrogen condition, and for the purpose of short-term storage within a month, $-80^{\circ}C$ storage condition can be possible to adopt. As a conclusion, the active implementation of frozen cells may contribute to decrease variations of experimental data during the initial cell-based screening process.

• Food Science of Animal Resources
• /
• v.26 no.4
• /
• pp.418-425
• /
• 2006

This study was conducted to evaluate extraction properties of crude saponin and ginsenosides, and their effects on sensory properties of emulsified pork sausage. Non-dried ginseng root was boiled in 0 (e.g., 100% distilled water), 20, 40, 60, 80 or 100% ethanol, and powdered by a freezing dry method. Weight of dried powder for the 0% ethanol extraction was 20% of initial non-dried ginseng weight, while $20{\sim}80%$ and 100% ethanol extractions resulted in approximately 15 and 10% of their initial weights, respectively. On the other hand, crude saponin content in the dried powder was linearly increased for a higher ethanol content where 100% ethanol extraction resulted in 123.52 mg/g. LC/MS analysis of crude saponin for quantifying ginsenosides showed that Rb1, Rb2 and Rc were significantly (p<0.05) higher levels for both 80 and 100% ethanol extractions. In the case of Rg1 ginsenoside, 60, 80 and 100% ethanol extractions resulted in significantly (p<0.05) higher levels. Emulsified pork sausages containing 0, 1 or 2% ginseng extracts were smoked or non-smoked and their sensory characteristics and preference were evaluated. Smoking process significantly (p<0.05) decreased juiciness and tenderness, but the treatment significantly (p<0.05) improved flavor and consumer preference. It was particularly noticed that a 2% addition of ginseng extract prevented the adverse effects of smoking process on juiciness and tenderness while the 2% addition significantly (p<0.05) improved consumer preference. The current results implied that addition of ginseng extract in emulsified pork sausage could improve sensory quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.7
• /
• pp.994-1001
• /
• 2012

Quality changes of pre-processed garlic, peeled and chopped, were analyzed during storage at $-18^{\circ}C$ or $2^{\circ}C$ for 30 days and at $20^{\circ}C$ for 3 days only for chopped garlic. As storage time increased, Hunter L values decreased and a, b values increased, indicating browning regardless of the pre-process type and storage temperature. Decay and sprouting rates of peeled garlic during storage at $2^{\circ}C$ significantly increased while those of peeled garlic were maintained during storage at $-18^{\circ}C$. Weight loss of peeled garlic during storage was greater at $-18^{\circ}C$ than at $2^{\circ}C$. Hardness of peeled garlic rapidly decreased by half from 1.04 kg to 0.58 kg by freezing, and it did not significantly change during the storage period. Viable numbers of total aerobic bacteria of peeled and chopped garlic did not significantly change during the storage period at $2^{\circ}C$ but were reduced at $-18^{\circ}C$. Total aerobic bacterial count of chopped garlic stored at $20^{\circ}C$ slightly increased during the storage period. Pyruvic acid content of chopped garlic was almost 2.5 times higher than that of peeled garlic at the initial stage (463.87 ${\mu}mol/g$ and 190.52 ${\mu}mol/g$, respectively). As storage time increased, pyruvic acid content of peeled garlic increased while that of chopped garlic decreased. These results indicate that pre-process type and storage temperature affected the quality changes of garlic during storage.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.275-291
• /
• 2023

Global warming has made the polar regions more accessible, leading to increased demand for the construction of new resource-development plants in oil-rich permafrost regions. The selection of locations of resource-development plants in permafrost regions should consider the surface displacement resulting from thawing and freezing of the active layer of permafrost. However, few studies have considered surface displacement in the selection of optimal locations of resource-development plants in permafrost region. In this study, Analytic Hierarchy Process (AHP) analysis using a range of geospatial information variables was performed to select optimal locations for the construction of oil-sands development plants in the permafrost region of southern Athabasca, Alberta, Canada, including consideration of surface displacement. The surface displacement velocity was estimated by applying the Small BAseline Subset Interferometric Synthetic Aperture Radar technique to time-series Advanced Land Observing Satellite Phased Array L-band Synthetic Aperture Radar images acquired from February 2007 to March 2011. ERA5 reanalysis data were used to generate geospatial data for air temperature, surface temperature, and soil temperature averaged for the period 2000~2010. Geospatial data for roads and railways provided by Statistics Canada and land cover maps distributed by the North American Commission for Environmental Cooperation were also used in the AHP analysis. The suitability of sites analyzed using land cover, surface displacement, and road accessibility as the three most important geospatial factors was validated using the locations of oil-sand plants built since 2010. The sensitivity of surface displacement to the determination of location suitability was found to be very high. We confirm that surface displacement should be considered in the selection of optimal locations for the construction of new resource-development plants in permafrost regions.

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.347-355
• /
• 2000

Zinc is one of the most abundant oligoelements in the living cell. It appears tightly bound to some metalloproteins and nucleic acids, loosely bound to some metallothioneins or even as free ion. Small amounts of zinc ions (in the nanomolar range) regulate a plentitude of enzymatic proteins, receptors and transcription factors, thus rolls need accurate homeostasis of zinc ions. Zinc is an essential catalytic or structural element of many proteins, and a signaling messenger that is released by neural activity at many central excitatory synapses. Growing evidences suggest that zinc may also be a key mediator and modulator of the neuronal death associated with transient global ischemia and sustained seizures, as well as perhaps other neurological disease stoles. Some neurons have developed mechanisms to accumulate zinc in specific membrane compartment ('vesicular zinc') which can be evidenced using histochemical techniques. Substances giving a bright colour or emitting fluorescence when in contact with divalent metal ions are currently used to detect them inside cells; their use leads to the so called 'direct' methods. The fixation and precipitation of metal ions as insoluble salt precipitates, their maintenance along the histological process and, finally, their demonstration after autometallographic development are essential steps for other methods, the so called 'indirect methods'. This study is a short report on the autometallograhical approaches for zinc detection in the central nervous system (CNS) by means of a modified selenium method.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.