• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.31-39
• /
• 2013

In this study, performance of the post-installed anchor system was evaluated with reduced strength of concrete and anchor. One of the post-installed anchors was selected to performance evaluation. Concrete strength was reduced by freeze-thawing test, and the post-installed anchor strength was reduced by corrosion test. The post-installed Anchor was installed in concrete of freezing and thawing and original concrete, and corroded anchor was installed in original concrete only. Anchor diameter and installation depth of the anchor were the variable for each specimen. Performance of post-installed anchor system of each specimen was evaluated by pullout test. Anchor diameter and installation depth of anchor, it may affect the performance of the post-installed anchor system from the experimental test results. Fracture mode of each post-installed anchor system had occurred differently depending on the durability of concrete and anchor. The anchor pullout strength from the experimental test results was used in order to compare with the results of CCD (Concrete Capacity Design) method, and CCD equation was modified. Modified equation was able to predict the anchor pullout strength of post-installed anchor system in Original concrete and freezing and thawing of concrete.

• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.119-124
• /
• 2002

This study was carried out to investigate the effects of packing materials of frozen boar semen to improve reproductive performance efficiency in pig. Boars were raised at Swine Artificial Insemination Center in National Livestock Research Institute, Sunghwan, Chungnam, Korea. We compared packing protocols for frozen boar semen among 5$m\ell$ maxi-straw, 5$m\ell$ cryogenic-vial, and aluminum-pack. Cryogenic-vial packing material showed similar sperm characteristics compared with maxi-straw packing material when the sperm was frozen above 15cm from liquid nitrogen and thawed at 52$^{\circ}C$ for 190 seconds. We investigated different thawing times to find out the optimal condition of freezing and thawing protocol with cryogenic-vial. Freezing above 15cm from liquid nitrogen and thawing at 52$^{\circ}C$ for 190 seconds were the optimal protocol compared with 120 and 150 seconds. However, normal acrosome rates did not show any differences among thawing times. Post-thawing results of maxi-straw in water at 52$^{\circ}C$ for 45 seconds had better total motility and curve linear velocity than those of cryogenic-vial in water 52$^{\circ}C$ for 190 seconds. However, there were no differences on straightness and normal apical ridge of sperm between maxi-straw and cryogenic vial. Non-return rate, farrowing rate and litter size of sows inseminated with frozen boar semen of commercial farms were higher in the maxi-straw than cryogenic-vial, but there were no significant differences between maxi-straw and cryogenic-vial. In conclusion, there were no significant differences between maxi-straw and cryogenic-vial and so, we may replace cryogenic-vial packing method instead of maxi-straw packing method by improvement of freezing and thawing rate.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.76-76
• /
• 2001

The objective of this study was to optimize the vitrification method of in vitro produced bovine embryos. Thus, in vitro produced embryos at 8 cell, morula and blastocyst stages were vitrified on electron microscope grids (EM grids) or in open pulled straws (OPS) with EG5.5 (5.5 M ethylene glycol, 1.0 M sucrose and 10% FBS in m-DPBS medium) freezing solution and their survival rates after thawing were compared. The embryos on EM grids or in OPS were briefly exposed to EG5.5 freezing solution and plunged directly into liquid nitrogen within 30 to 35 sec. Post-thawed embryos were serially diluted in 0.5, 0.25 and 0.125 M sucrose in m-DPBS, each for 1 min, and then cultured in CRI aa medium supplemented with 10% FBS. Embryonic survival rate was assessed as re-expanded and hatched rates of those embryos after warming. The rates of re-expansion embryos did not significantly different between EM grid (8 cell: 42.10%, morula: 66.66% and blastocyst: 77.08%) and OPS (8 cell: 47.36%, morula: 61.90% and blastocyst: 83.33%) methods. In addition, the hatched rates in EM grid (8 cell: 31.57%, morula: 57.14% and blastocyst: 72.91%) were similar to those in OPS (8 cell. 34.21%, morula: 50.00% and Blastocyst: 77.08%). Interestingly, even at the same blastocyst stage, the in vitro survival of day 7 embryos (EM grid: 79.48 and OPS: 87.18%) was higher than those of day 8 embryos (EM grid: 72.10 and OPS: 82.06%). The total cell number of blastocyst developed in vitro after vitrification was examined with Hoechst 33342 staining to compare the embryo quality among different treatment groups. The total cell number of blastocyst was not significantly different between vitrified groups (EM grid: 162.4$\pm$8.0 and OPS: 158.4$\pm$7.1) and unvitrified control (168.0$\pm$5.6). These results indicate that both vitrification containers can provide the high rate of embryo survival. Moreover, the OPS container may not need a cap to protect the container from floating after immersion in L$N_2$. Therefore, this study suggest that bovine embryos can be cryopreserved easily, effectively and successfully by vitrification method using EM grid or OPS with EG5.5 freezing solution. In the future, the Pregnancy rate would be investigated after transfer of our vitrified embryos into the appropriated recipients.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.73.1-73.1
• /
• 2010

For the successful cold starting of a fuel cell engine, either internal of external heat supply must be made to overcome the formation of ice from water below the freezing point of water. In the present study, switchable vanadium oxide compounds as variable temperature-electrical resistance materials onto the surface of flat metallic bipolar plates have been prepared by a dip-coating technique via an aqueous sol-gel method. Subsequently, the chemical composition and micro-structure of the polycrystalline solid thin films were analyzed by X-ray diffraction, X-ray fluorescence spectroscopy, and field emission scanning electron microscopy. In addition, it was carefully measured electrical resistance hysteresis loop over a temperature range from $-20^{\circ}C$ to $80^{\circ}C$ using the four-point probe method. The experimental results revealed that the thin films was mainly composed of Karelianite $V_2O_3$ which acts as negative temperature coefficient materials. Also, it was found that thermal dissipation rate of the vanadium oxide thin films partially satisfy about 50% saving of the substantial amount of energy required for ice melting at $-20^{\circ}C$. Moreover, electrical resistances of the vanadium-based materials converge on an extremely small value similar to that of pure flat metallic bipolar plates at higher temperature, i.e. $T{\geq}40^{\circ}C$. As a consequence, experimental studies proved that it is possible to apply the variable temperature-electrical resistance material based on vanadium oxides for the cold starting enhancement of a fuel cell vehicle and minimize parasitic power loss and eliminate any necessity for external equipment for heat supply in freezing conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.550-554
• /
• 1998

We suggested the new method of thermal screen in Bridgman-Stockbarger method to control the polygrain, the internal cavities and solid-liquid (SL) interface. $CaF_2$ single crystal of 6 inch was grown perfectly when we adopted to use a graphite pipe and a ceramic warmer in the conditions of growth rate 2 mm/hr, vertical temperature of $14^{\circ}C$ for freezing and temperature of $1324^{\circ}C$ at conical tip of crucible. The light scattering phenomena occurred by internal cavities were controlled as decreasing the freezing rate to 2 mm/hr and/or as adopting the rotation of melt (7 rpm).

• Journal of Embryo Transfer
• /
• v.6 no.1
• /
• pp.13-24
• /
• 1991

The objective of this experiment was to study some possibilities to simplify freezing, thawing and transfer procedure of one-step straw method comparing with the conventional methods using bovine embryos. The previous work are also designed to investigate the thawing effect by development stage and its quality using the embryos. Results obtained were summarized as follows: 1. A total of 87 embryos from 14 donor cows were frozen-thawed and an average of frozen embryo/donor was 6.2. 2. The survival rates of morula stage(65.4%) were higher than those of blastocyst stage(57.l%) and vice versa in rate of morphological recovery (80% vs 95.4%). However. no significant difference was denoted between them. 3. In difference between the groups of good quality and poor quality. good quality was resulted in a significantly higher embryo survival rate(75%) and recovery rates(95%) than poor quality(P<0.0l). 4. In effects of non-permeable sugar dilution in added to l.0M glycerol. higher survival rates were orderd in sucrose. lactose, raffinose and xylose. But lactose-raffinose, sucrose-trehalose and xylose in added to 2.OM glycerol. 5. The highest survival rates were obtained by direct plunge into the liquid nitrogen with 3.OM concentration both of glycerol and trehalose. 6. The survival rates in vitro condition of one-step and direct plunge methods(75%-87.5%) were significantly higher than those of multiple steps (21.4-52.6%) in in vitro (P<0.0l). However, the results of single-step were critical in comparing to other steps of final pregnant conformation.

• Journal of Embryo Transfer
• /
• v.26 no.4
• /
• pp.245-250
• /
• 2011

The aim of this study was to evaluate the post-thawed characteristics of leopard cat semen. In this experiment, semen was collected from two leopard cats (A and B) at wild animal center in Seoul Grand Park in Korea. After collection, the sperms were washed with D-PBS and diluted by the freezing medium (Irvine science, USA) and stored in liquid nitrogen. The post-thawed concentration was $357{\times}10^6sperms/ml$ for A and $97{\times}10^6sperms/ml$ for B. The viability of post-thawed sperm from A and B individual was 24.0% and 19.0%, respectively. Pre-freezing motility of A and B individual semen was 68.54% and 56.65. Leopard cat A had more normal sperm than that of B (69.5% vs. 54.5%). Acrosome integrity analysis detected live (14.5% vs. 9.0%), damage (39.0% vs. 44.0%) and dead (46.0% vs. 47.0%) in leopard cat A and B, respectively. The present results concluded that leopard cat semen can be collected successfully by electro-ejaculation method and cryopreserved successfullyfor future use in different assisted reproductive technologies. The cryopreservation protocol needs to be modified for increasing post-thawed viability of leopard cat spermatozoa.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2011

Anti-icing system can immediately respond when snowing is expected or the snow comes down on the road surface. It has been recognized that the system can reduce traffic accidents and congestion by quickly removing the frozen road surface area. However, it is very difficult to implement this system due to the expensive equipment installation and operation cost, Recently, there was a developed program for predicting the freezing area using three-dimensional model and tracking the sun path. But, there is no objective analysis method and all developed approaches are different so that the general standard of anti-icing system is needed. In this study, we proposed the decision criteria for determining application priorities of the anti-icing system based on weather and road conditions, i.e., geometric and topographic conditions. Regional climate survey, topographical analysis, and dynamic vehicle simulation considered road geometry and skid resistance was conducted to standardize the installation method of anti-icing system.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.63-67
• /
• 2009

To increase utilities as functional materials, 173 strains of silkworm genetic resources in the form of silkworm powder were evaluated for antioxidative capacity, with minilum L-100 device and ARAW-KIT (anti-radical ability of water soluble substance). Silkworm powder was prepared with freezing method from silkworms at 5th instar 3rd day larvae. All strains of silkworm powder were prepared with 80% methanol extraction. The data of pupation rate, longevity of silkmoth with origin and voltinism were used for data base of silkworm genetic resources. The weight of a silkworm larva with freezing method at 5th instar 3rd day was measured. The average of antioxidative capacity of 173 silkworm strains was 429.68 nmol. The analysis of correlation among variables was significant, showing negative correlation of the antioxidative capacity with longevity of silk moth and weight of 5th instar silkworm larva. The strains from the tropic, Europe and some other origins were comparatively high. In conclusion, short longevity and low weight of 5th instar silkworm larvae showed comparatively effective antioxidative capacity.

• ALGAE
• /
• v.24 no.4
• /
• pp.257-265
• /
• 2009

Marine microalgae are a key diet component in finfish and shellfish aquaculture. Cryopreservation of the microalgae is suggested by many other studies as the best method for long-term storage. To test cryopreservation efficacy, 19 taxas of marine microalgal species were examined. In the first experiment we compared dimethylsulfoxide ($Me_2SO$) and glycerol, which are most widely used as cryoprotectant agents (CPAs). The cryopreservation comprised two freezing procedures. Firstly, the samples containing the CPAs were kept at $4^{\circ}C$ for 10 min before being plunged into liquid nitrogen ($-196^{\circ}C$). Secondly, samples containing CPAs were pre-cooled ($-1^{\circ}C$ $min^{-1}$ to $-80^{\circ}C$ before being plunged into liquid nitrogen. Most of the species were successfully cryopreserved using $Me_2SO$, whereas the Prasinophyceae (T. striata and T. suecica) were successfully cryopreserved using glycerol. In general, the cooling method had no influence on the survival of the microalgae except in the case of the Tetraselmis species. In the second experiment, the cultured solution was divided before cryopreservation into concentrated and non-concentrated groups to identify the effect of cell density during cryopreservation. After 12 months of storage, the samples were again divided into centrifugation and non-centrifugation groups to learn the effect of $Me_2SO$ on the culture. Viability and growth of the microalgae were not influenced by cell density or the centrifugal removal of the $Me_2SO$ after thawing.