• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.433-439
• /
• 2011

The frost depth(frost penetration) is used to install anti-frost heave layers in pavement designs. The freezing index is calculated by an annual accumulated value of multiplying the period of time with temperatures below zero, and the corresponding temperature. Therefore, the DAAT(daily average air temperature) calculation method may play an effect on the FI(freezing index). The Weather Observatory used to supply 4 average air temperatures per day, but currently supplies 8 per day. With this study, we divided the southern part(below FI=$350^{\circ}C{\cdot}day$) of the Korean peninsula into 6 areas according to site conditions(low embankment, embankment-cutting slope, and the cutting slope) and established a field measurement system for 15 positions to check the effects on the result of FI according to differing DAAT calculation methods. The air temperatures obtained by the field measurement system was used to calculate and compare the FI. As a result, the freezing index calculated based on the $DAAT_4(T_4)$ is normally greater by 3% than the one on $DAAT_8(T_8)$. In addition, the calibration equation for the freezing index using air temperatures was proposed through the research.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.1
• /
• pp.50-54
• /
• 2015

Mulberry fruit is common to keep a frozen storage because of the very high water content. Because freezing-storing cost is generated before the processing or sales, farmers of mulberry fruit production are weighted in financial burden. In addition, mulberry fruit has difficulty in expanding consumption by made in the simple processed products like the mulberry jam, mulberry juice, mulberry enzyme, alcohol, etc. Recent, frozen fruits including frozen blueberries, frozen strawberries, frozen mango, frozen rich, frozen mulberry fruit has been started to sell in the large discount stores and convenience stores. However, there is restricted sales in only special place that have the frozen distribution facilities. So, for the income improvement and consumption promotion of mulberry farmers facing these difficult situations, we developed the processing method of semi-dried mulberry fruit using the vacuum freezing dryer. The frozen mulberry fruit which was stored below $-40^{\circ}C$ is to dry in a vacuum freeze dryer, at $30{\sim}35^{\circ}C$, 23 ~ 24 hours. Semi-dried mulberry fruit seperated respectively. It had soft texture, and maintained shape, size and flavor. In particular, semi-dried mulberry fruit can be stored at room temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.183-190
• /
• 2006

An experimental study was conducted to evaluate the effect of freezing-thawing and air pollutants on the weathering of $TiO_2$ loaded granite. And the granite was coated with $TiO_2$ catalyst and tested. After freezing-thawing and air pollutants experiments the mineral compositions of the granite surface were lower then that of the fresh granite. Density of the weathered granite was steadily decreased from $2.60g/cm^3\;to\;2.55{\sim}2.56g/cm^3$, but absorption ratio and porosity were slightly increased. From these results, it was expected that granite could be weathered by freezing-thawing md air pollutants. In the case of $TiO_2$ was coated to the granite, the compressive strength and absorption ratio were slightly enhanced compared to the $TiO_2$ non-coated granite. Therefore, the $TiO_2$ coating method tested in this study considered to be a viable method to assist in the conservation of granite from environmental contaminants.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.6
• /
• pp.23-31
• /
• 2016

Nowadays abnormal coldness happens frequently in Korea and frost heaving causes unexpected ground deformation which results in severe problems for structures such as roadway, railroad and cutoff slope. 'Frost heave' as one of the primary phenomenon is considered to be an important factor together with 'adfreeze bond-strength' and 'creep deformation' for structural design process in permafrost area. Therefore, the fundamental study for frost heave has to be preceded for design of geo-structures in cold region. While various experimental apparatuses have been developed, there still exist a certain level of limitation to evaluate the frost-heave characteristics as design parameters. There are no standard testing method and criteria for analyzing frost heaving in Korea because temperature controlled testing apparatuses including a freezing chamber are expensive. In this paper, a new standard freezing and thawing testing apparatus is introduced, which simulates various freezing and thawing conditions in a soil specimen by using a temperature controlled triaxial cell. Frost heaving tests were performed to assess the new testing apparatus and experimental procedure to evaluate frost heaving for soils is proposed.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.47-56
• /
• 2014

In winter season, the pore water inside the ground freezes and thaws repetitively due to the cold air temperature. When the freezing-thawing processes are repeated on the ground, the change in soil particle structure occurs and thus the damage of the infrastructure may be following. This study was performed in order to investigate the stiffness change of soils due to the freeze-thaw by using elastic waves. Sand-silt mixtures are prepared with in the silt fraction of 40 %, 60 % and 80 % in weight and in the degree of saturation of 40 %. The specimens are placed into the square freezing-thawing cell by the temping method. For the measurement of the elastic waves, a pair of the bender elements and a pair of piezo disk elements are installed on the cell, and a thermocouple is inserted into soils for the measurement of the temperature. The temperature of the mixtures is decreased from $20^{\circ}C$ to $-10^{\circ}C$ during freezing, is maintained at $-20^{\circ}C$ for 18 hours, is gradually increased up to the room temperature of $20^{\circ}C$ to thaw the specimens. The shear waves, the compressional waves and the temperature are measured during the freeze-thaw process. The experimental result indicates that the shear and the compressional wave velocities after thawing are smaller than those of before freezing. The velocity ratio of after thawing to before freezing of shear wave is smaller than that of the compressional wave. As silt fraction increases from 40 % to 80 %, the shear and compressional wave velocities are gradually increased. This study suggests that the freezing-thawing process in unsaturated soil loosens the soil particle structure, and the shear wave velocity reflects the effect of freezing-thawing more sensitively than the compressional wave velocity.

• Korean Journal of Animal Reproduction
• /
• v.23 no.4
• /
• pp.281-291
• /
• 1999

The objective of this study was to optimize the freezing/thawing method of in vitro produced Hanwoo blastocysts. Day 7 blastocysts after IVF were vitrified using EFS40 (40% ethylene glycol, 18% ficoll, 0.3 M sucrose and 10% FBS added m-DPBS) as a freezing solution and electron microscope (EM) grid (V-G) or straw (V-S) as an embryo container. In both method, freezing/thawing were treated by 2-step, treatment time was required in V-G method and V-S method, for 2 min / 3 min and 3.5 min / 10 min, respectively. Embryo survival was assessed as re-expanded and hatched rates at 24 h and 48 h after warming, respectively. The results obtained in these experiments were summarized as follows: when the effect of exposure in vitrification solution and chilling injury from freezing procedure on in vitro produced expanded blastocysts were examined, at 24 h after warming, embryo survival in exposure group (100.0%) was not different compared to that in control group (100.0%), although those results were significantly different with two vitrified groups (V-G: 87.8, V-S: 77.8%) (P＜0.001). However, at 48 h after warming, hatched rates of V-G group (67.8%) were significantly higher than those of V-S group (53.3%) (P＜0.05). In addition, this hatched rate in V-G group was not different with that in exposure group (73.3%). When the effects of embryo developmental stage (early, expanded and early hatching blastocysts) and embryo container (EM grid and straw) to the in vitro survival of vitrified-warmed day 7 Hanwoo blastocysts were simultaneously examined, fast developed embryos were indicated the better resistance to freezing than delayed developed one, irrespective of embryo containers (early; 57.1 ＆ 24.4%, expanded; 84.7 ＆ 60.6%, early hatching; 91.7 ＆ 80.0%) (P＜0.001). Especially, in expanded and early hatching blastocysts, embryo survival of V-G group (67.8, 95.0%) was significantly higher than those of V-S group (53.0, 65.0%) at 48 h post warming, respectively (P＜0.05, P＜0.001). Therefore, this study indicates that Hanwoo blastocysts can be cryopreserved more simple, efficient and successful by vitrification method using EM grid.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.801-806
• /
• 2001

In the latest, the construction period became the most important factor in the domestic building works because buildings is higher and larger gradually. Accordingly, cold-weathering concrete constructions are performed more and more. So, the demands of concrete quality management methods are increased in cold-weathering concrete constructions. In this study, the mock-up experiment was performed to correct input data in the kimpo H construction field. Using the results of this experiment, the method of temperature analysis was presented to prevent early aged freezing damage and to control thermal crack in this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.791-796
• /
• 1998

Air voids existed in hardened concrete have an important influence on concrete deterioration such as carbonation, freezing and thawing, and corrosion of embedded steel in concrete. Therefore it is very significant to investigate the pore structure of system(size, number and continuity of air voids) to solve the reason caused concrete deterioration. The purpose of this study is to develop the standard method of measuring air voids which affect properties in hardened concrete using image analyzing system. This paper presents the settlement of rapid and exact experimental method which extracts fine bubbles, calculates the number of air voids, and determines air-void distribution using image analyzing system with computer.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.98-98
• /
• 2003

Recently, human embryonic stem (hES) cells have become very important resources for ES cell basic research, cell replacement therapy, and other medical applications; thus, efficient cryopreservation methods for these cells are needed. This study examined whether a newly developed minimum volume cooling (MVC) vitrification method, which was tested through cryopreservation of sensitive bovine oocytes, can be used for freezing hES cells. Feeder-free cultured hES cell (MB03) colonies were mechanically dissected into several small clumps following enzymatic treatment. We compared the freezing efficiency of a slow-cooling method using a cryo-module (0.4-0.6C/min, 20-30 clumps/vial) and MVC vitrification using a modified 0.5-ml French mini-straw designated as a MVC straw (>$20,000{\circ}C$/min, 10 clumps/straw) After thawing, in vitro survival of hES cell clumps was higher for MVC-vitrified cells (80.8%, 97/120) than for slow-cooled cells (38.2%, 39/102). Further, the proliferation rate of surviving MVC-vitrified cells was similar to that of control hES cells from 2 weeks after thawing. In addition, vitrified-thawed hES cells demonstrated a normal karyotype, were positively immunostained for surface marker antibodies (AP, SSEA-4 and TRA-1-60) and the Oct-4 antibody, and could differentiate into all three embryonic germ layer cells in vitro. This result demonstrates that hES cell clumps can be successfully cryopreserved by a newly developed MVC vitrification method without loss of human cell characteristics.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.4
• /
• pp.149-154
• /
• 2005

Fuel cell performance evaluation logic was developed using G-language (LabVIEW) to measure performance stability. Degree of stability and reliability of performance data were improved with averaged value and standard deviation method. Water injection system was introduced and the performance using this method was comparable to that of conventional humidification method. Water injection system has advantage of lowering operation energy consumption, reducing the number of parts needed in humidification, therefore increasing efficiency of fuel cell system. Fuel cell performance was decreased in case of low temperature operation such as sub freezing condition. Air purge method was tested to reduce the water content in cell fixture before sub freezing condition. The performance degradation due to low temperature operation was minimized by air purge method in medium size cell fixture ($25cm^2$) case.