• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.260-270
• /
• 2018

Purpose: The purpose of this study is to evaluate the life of the capsule, which is a core part of the heat storage cooling system. This paper will develop a life test mode that can reproduce environment conditions through the analysis of capsule shrinkage and expansion characteristics. Methods: In order to determine the life test mode of the capsule, this paper analyzed the case of field failures and analyzed the deformation characteristics according to the pressure fluctuation of the capsule. The method to find out whether the field failure and deformation analysis results are consistent is the testing with the construction of the repetition pressure test equipment and the thermal cycle test to reproduce the freezing and thawing characteristics. Results: In this study, failure mode analysis and analysis of freezing and thawing characteristics regarding to the capsule positions were completed. Based on this test & analysis results, this paper have been able to determine the main parameters for determining the life test mode, the freezing and thawing time. Conclusion: Determining the lifetime mode of the capsule can be used to improve the life and performance of the thermal storage system.

• 한국농공학회지
• /
• 제38권5호
• /
• pp.116-124
• /
• 1996

The purpose of The work described in this paper is to clear up the initial moisture content, specific surface, air drying and freezing-thawing process on liquid limit of clayey soils distributed widely at estuary of three main rivers in the west coast. To this end, a series of tests were conducted on clayey soils samples with natural state and treated state. From the test results, the liquid limit was decreased with decrement of initial moisture content, air drying process, and freezing-thawing cycles and increased with increment of specific surface. The specific surface which influenced on the liquid limit is over $25 m^2$m$^2$/g, and their relationships are well formulated. Air drying process is expected to improve the engineering properties of the soils such the pro-water properties were changed to anti-water proper-ties through lowering of water holding as resulted to incline from A-7-5 to A-5 on the soil classificaction plastic chart. The freezing-thawing process decreased 20% of liquid limit, especially under the first cycle of the behavious, as a result of above mentioned reasons, phase change of soil-water system brought the decrement of specific surface and affected to the liquid limit.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.117-122
• /
• 1998

Concrete structures has been deteriorated by the freezing and thawing due to temperature gap. This study was conducted to evaluate durabilite of concrete which are increasingly demanded recently. Therefore the research of durability must be executed for application of waste foundry sand concrete real structures. Concrete durability must be executed for application of waste foundry sand concrete real structures. Concrete durability properties incorporating waste foundry sand was performed with the variable of W/C ratio, Sand/Waste foundry sand ratio and Air entrainment-Non air entrainment. Cylinder specimens were made and subjected to freezing and thawing cycle at $-18^{\cire}C$ and $4^{\cire}C$. Dynamic modulus of elasticity were evaluated as F/T cycle increase. The results show that strength of concrete is increased the W/C ratio decrease, the Sand/Waste foundry sand ratio increase when the concrete contains AE agent and decreasing WC ratio and AE concrete makes improved resistance of freezing and thawing improved. Especially, resistance of freezing and thawing is improved by Fine aggregate/Waste foundry sand ratio which is 50%, 25%, 0% in a row. Therefore it is turn out the waste foundry sand could be applied to concrete from the experiment.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.54-60
• /
• 2009

Exposed to various environments, concrete confronts degradation by a lot of physical and chemical reaction. Though so many experiments and theorizations on the single condition of concrete degradation have been carried out by constant studies, the truth for now is that there are few studies on the compound phenomenon of degradation related with marine environments. Accordingly, this study measured the degree of degradation in the change of external shape, the change of unit weight and compressive strength, ultrasonic velocity test, and the change of length, etc. after exposing the specimen of cement mortar to the environment between 0 cycle and the maximum of 300 cycles under the condition of aquatic curing, freezing and thawing, and compound degradation, using mineral admixture effective for concrete degradation as a binder. The result indicated that the case of adding mineral admixture showed greater resistance than that of using OPC only, and specifically, the specimen with the additive of slag powder and three component system showed very excellent resistance to freezing and thawing, and compound degradation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.32-37
• /
• 2010

Recently, the land area for many people has been limited because of industrialization and modernization in Korea. The large-scale constructions like the reclamation development projects have been progressed to resolve this problem mentioned above. Therefore, as many of the usefulconstruction materials as possible are needed to perform the large-scale construction projects. Many studies for the utilization of pond ash which has a similar characteristic of sand have been conducted and there has been often occurred many structural problems on roadbed in winter. Therefore, the characteristics of the freezing and thawing for Controlled Low-Strength Material (CLSM) using pond ash were analyzed and evaluated by unconfined compressive strength test in this study. As a result of this study, it was confirmed that new CLSM using pond ash with cement (8.2% by weight)was able to stand for the freezing and thawing behavior.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• 대한토목학회논문집
• /
• 제28권3D호
• /
• pp.325-330
• /
• 2008

GFRP 다웰바의 장기 내구성능 저하 메커니즘을 규명하기 위하여 실제 콘크리트 포장에서 발생할 수 있는 수분환경과 동결융해반복 환경하의 촉진 내구성능 평가를 실시하였으며 그에 따른 미세구조 분석을 통해 성능저하 열화 진행 메커니즘을 분석하였다. GFRP 다웰바의 내구특성 평가는 촉진환경에 노출 후 전단시험을 실시하여 분석하였으며 미세구조 분석을 위하여 SEM 사진과 가스흡착에 의한 공극측정을 실시하였다. 실험결과 수분환경 및 동결 융해반복 환경에 노출된 GFRP 다웰바는 내구특성 저하가 거의 나타나지 않았다. 이와 같은 결과는 미세구조분석에서 명확히 관찰 할 수 있었다.

• 한국식품영양과학회지
• /
• 제43권7호
• /
• pp.1055-1061
• /
• 2014

본 연구는 양파의 최적 냉동 분석 조건을 확립하기 위해 다양한 냉동속도가 양파의 이화학적 및 영양학적 특성 변화에 미치는 정도를 관찰함으로써 진행되었다. 본 실험에서는 강제송풍방식을 이용하였으며, 자연대류식($0.1^{\circ}C/min$), 저속 ($0.5^{\circ}C/min$) 및 고속($0.7^{\circ}C/min$)으로 냉동속도를 조절하여 $-12^{\circ}C$까지 냉동하였다. 냉동양파의 해동은 전자레인지를 이용하여 중심부의 온도가 $4^{\circ}C$가 될 때까지 400 W의 세기로 해동하였다. 분석 결과 양파의 강도는 데치기 처리된 양파(대조구)에 비해 냉 해동 후 현저히 감소하는 경향을 보였고, 냉동속도가 빠를수록 대조구와 유사하게 나타났다. 양파의 해동 감량은 냉동속도가 빠를수록 증가하였다. 양파의 색도는 냉동속도가 느릴수록 대조구와 현저한 차이를 보였다. 또한 전자현미경(SEM) 관찰 결과 냉동속도가 빠를수록 기공의 크기가 작았으며, 이는 빠른 냉동속도가 식품 조직의 손상을 방지하는 것으로 사료된다. 영양성분의 분석 결과 비타민 C의 경우 생 시료(대조구)에 비해 데치기 및 냉 해동처리 후 값은 감소하였지만 냉동속도에 따른 큰 차이는 나타나지 않았다. 유리당의 함량은 데치기 및 냉 해동 처리 후 감소하였으며, fructose, glucose 및 sucrose의 함량은 고속으로 냉동 시 가장 높았다. Citric acid, succinic acid 및 fumaric acid 함량은 냉동속도에 따른 차이는 없었고, malic acid 함량은 고속냉동 시에 가장 높은 값을 보였다. 본 연구결과 고속으로 양파를 냉동할 때 물리적 및 영양적 손실을 막아 품질을 유지하는데 효과적인 것으로 사료된다.

• 폴리머
• /
• 제27권4호
• /
• pp.349-357
• /
• 2003

생체 적합성이 우수한 폴리(비닐 알코올)(PVAL)과 폴리(N-비닐 피롤리돈)(PVP), 항균성이 있는 헥실렌글리콜 (HG)과 치료효과가 우수한 수용성 키토산을 혼합하여 상처치료용 수화젤을 제조하였다. 제조 방법으로 수용액의 동결과 융해에 의한 물리적 가교, 방사선 조사에 의한 화학가교 및 동결과 융해의 물리적 가교 후 방사선 가교를 이용하였다. 수화젤 제조시 PVAL/PVP/HG/키토산의 농도는 15 wt%, 키토산은 0.3wt%, PVAL과 PVP의 비는 6:4로 고정하였다. 용액내 HG의 농도를 1∼5 wt%로 변화시켰으며, 동결과 융해횟수는 1∼3회로 변화시켰고, 방사선 조사량은 25∼50 kGy로 변화시켰다. 위의 방법으로 제조된 수화젤의 젤화율, 팽윤도, 젤강도를 측정하였다. HG의 조성비가 증가할수록 젤화율과 젤강도는 감소하였고 팽윤도는 증가하였다. 조사량과 동결과 융해 횟수가 증가할수록 젤화율과 젤강도는 증가하였고 팽윤도는 감소하였다. 동물 실험을 통해 제조된 수화젤의 상처 치료효과를 보았으며, 항균 실험을 통해 항균성을 관찰하였다.

• 한국가축번식학회지
• /
• 제21권2호
• /
• pp.103-109
• /
• 1997

The studies on the carried out to investigate to determine the optimum thawing temperature and equilibration time and 1 step straw method of frozen bovine embryos. The follicular oocytes were cultured in TCM-199 medium containing 10 IU/ml PMSG(Sigma, USA), 10 IU/ml hCG(Sigma, USA), 1 $\mu\textrm{g}$/ml $\beta$-estradiol(Sigma, USA) and 10% FCS for 24~48 hrs in incubator with 5% CO2 in air at 38.5$^{\circ}C$ and then matured oocytes were again cultured for 12~18 hrs with motile capacitated sperm by preincubation of heparin. The bovine embryos following dehydration by cryoprotective agents and various concentration of sucrose were directly plunged into liquid nitrogen and thawed in 3$0^{\circ}C$ water. Survival and in vitro developmental rate was defined as developmental rate on in vitro culture or FDA-test. The results are summarized as followes : 1. The equilibration time on in vitro developmental rates of bovine embryos was attained after short period of time(2.5~5 min.) in the freezing medium higher than long period of time (10~20 min.). 2. The temperature thawed at 3$0^{\circ}C$ after rapid freezing of bovine embryos resulted in a significantly higher in vitro developmental rate than did at 2$0^{\circ}C$ and 35$^{\circ}C$. 3. The thawing time on in vitro developmental rates of bovine embryos was attained after short period of time(1~5 min.) in the freezing mediuim higher than long period of time(10min.). 4. The in vitro developmental rates of bovine embryos after rapid frozen-thawing by 1 step straw method in the freezing medium added 1.5M, 2.0M glycerol, DMSO, propanediol and 0.25M, 0.50M, 0.75M, 1.00M sucrose were 12.5~19.4%, 10.0~15.6%, 9.1~13.8% and 6.7~12.9%, respectively.