• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.560-568
• /
• 2011

In SPH(Smoothed Particle Hydrodynamics) method, the fluid has been assumed that it is weakly compressible to solve the basic equations composed of Navier-Stokes equations and continuity equation. That leads to some drawbacks such as non-physical pressure fluctuations and a restriction as like small time steps in computation. In this study, to improve these problems we assume that the fluid is incompressible and the velocity-pressure coupling problem is solved by a projection method(that is, by ISPH method). The two-dimensional computation results of dam breaking and gravitational wave generation are respectively compared with the results of finite volume method and analytical method to confirm the accuracy of the present numerical computation technique. And, the agreements are comparatively acceptable. Subsequently, the green water simulations of a two-dimensional fixed barge are carried out to inspect the possibility of practical application to ship hydrodynamics, those correspond to one of the violent free surface motions with impact loads. The agreement between the experimental data and the present computational results is also comparatively good.

• Journal of Welding and Joining
• /
• 제20권4호
• /
• pp.484-490
• /
• 2002

The formation and stability of stationary laser weld keyholes were investigated using a numerical simulation. The effect of multiple reflections in the keyhole was estimated using the ray tracing method, and the free surface profile, flow velocity and temperature distribution were calculated numerically. In the simulation, the keyhole was formed by the displacement of the melt induced by evaporation recoil pressure, while surface tension and hydrostatic pressure opposed cavity formation. A transition mode having the geometry of the conduction mode with keyhole formation occurred between the conduction and keyhole modes. At laser powers of 500W and greater, the protrusion occurred on the keyhole wall, which resulted in keyhole collapse and void formation at the bottom. Initiation of the protrusion was caused mainly by collision of upward and downward flows due to the pressure components, and Marangoni flow had minor effects on the flow patterns and keyhole stability.bility.

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.882-895
• /
• 2006

Surface and interfacial waves in two superposed horizontal inviscid fluids of finite depths are studied. The flow is induced by translating a vertical rigid plate with a prescribed velocity. Analytical solutions that accurately predict the motion of the free surface and the interface are obtained by using a small-Froude-number approximation. Three different velocities of the plate are considered, while flows induced by any arbitrary motion of the plate can be easily analyzed by a linear superposition of the solutions obtained. It is shown that pinching of the upper layer can occur for a sufficiently thin upper layer, which leads to its rupture into small segments. Other interesting phenomena, such as primary and secondary wiggles generated on the interface near the wavemaker, are discussed.

• 대한조선학회지
• /
• 제13권3호
• /
• pp.1-9
• /
• 1976

A numerical method for solving the boundary-value problem related to potential flows with a free surface and an experimental work are introduced in this paper. The forced heaving motion of cylinders with arbitrary shapes in water of finite depth are Considered here. The Fredholm integral equation of the first kind is employed in determining strengths of singularities distributed on the body surface. And the results obtained by the present method for the case of a heaving circular cylinder on water of finite depth agree well with existing results of earlier investigators.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.644-651
• /
• 2002

The formation and stability of stationary laser weld keyholes are investigated using a numerical simulation. The effect of multiple reflections in the keyhole is estimated using the ray tracing method, and the free surface profile, flow velocity and temperature distribution are calculated numerically. In the simulation, the keyhole is formed by the displacement of the melt induced by evaporation recoil pressure, while surface tension and hydrostatic pressure oppose cavity formation. At laser powers of 500W and greater, the protrusion occurs on the keyhole wall, which results in keyhole collapse and void formation at the bottom. Initiation of the protrusion is caused mainly by collision of upward and downward flows due to the pressure components.

• 대한조선학회논문집
• /
• 제51권4호
• /
• pp.265-273
• /
• 2014

Wave-body interaction is simulated using a developed code based on the flux-difference splitting scheme for immiscible and incompressible fluids and the hybrid Cartesian/immersed boundary method. A free surface is captured as a moving contact discontinuity within a fluid domain and an approximated Riemann solver is used to estimate the inviscid flux across the discontinuity. Immersed boundary nodes are identified inside an instantaneous fluid domain near a moving body, then dependent variables are reconstructed at those immersed boundary nodes based on interpolation along local normal lines to the boundary. Free surface flows around an oscillating cylinder are simulated and the computed wave elevations are compared with other reported results. The generation of a solitary wave by a moving wave-maker is simulated and the time histories of wave elevations at two different points are compared with other results. The developed code is applied to simulate body motion of an elastically mounted circular cylinder as a solitary wave passes the body. The force acting on an elastically mounted cylinder is compared with the force acting on a fixed cylinder. Grid independency of the computed body motion is established based on a comparison of results using three different-size grids.

• 대한기계학회논문집B
• /
• 제35권6호
• /
• pp.617-624
• /
• 2011

본 연구에서는 사각용기 내에서의 자유표면을 갖는 2차원 슬로싱 문제에 대하여 고찰하였다. 용기 내부의 유동은 수평방향의 조화운동을 통해 형성되며, 외부 가진 속도는 u=Asin($2{\pi}ft$)으로 정의 된다. 여기서 u, A�� 그리고 f는 외부로부터 작용하는 가진 속도, 변위 그리고 주파수를 각각 나타낸다. 큰 변위(A~O(1)) 슬로싱 문제의 해석을 위한 실험설비를 구축하였으며, 광범위한 영역에서의 PIV실험을 수행하였다. 실험을 통해 자유표면의 움직임(motion)을 각각 서로 다른 물리적 특성을 갖는 세 가지; 선형 슬로싱의 자유표면의 움직임과 유사한 standing wave motion, 사각용기의 속도가 0을 지나는 순간(the moment of turn-over) 측벽에서 발생하는 run-up motion 그리고 측벽으로부터 내부유체로 점차적으로 전파되는 bore motion으로 분류하였다.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.322-329
• /
• 2005

Viscous flows behind transom stern are analyzed based on CFD simulation results. Stern wave pattern is often complicated due to the abrupt change of stern surface curvature and flow separation at transom. When a ship advances at high speed, whole transom stern is exposed out of water, resulting in the so-called 'dry transom'. However, in the moderate speed regime, stern wave development in conjunction of flow separation makes unstable wavy surface partially covering transom surface, i.e., the so-called 'wetted transom'. Transom wave formation is usually affecting the resistance characteristics of a ship, since the pressure contribution on transom surface as well as the wave-making resistance is changed. Flow modeling for 'wetted transom' is difficult, while the 'dry transom modeling' is often applied for the high-speed vessels. In the present study CFD results from the RANS equation solver using a finite volume method with level-set treatment are utilized to assess the topology of transom flow pattern for a destroyer model (DTMB5415) and a container ship (KCS). It is found that transom flow patterns are quite different for the two ships, in conformity to the shape of submerged transom. Furthermore, the existence of free surface seems to after the flow topology in case of KCS.

• 한국추진공학회지
• /
• 제2권3호
• /
• pp.10-19
• /
• 1998

초음속 부족팽창제트가 충돌할 때 유동장은 매우 복잡한 유동구조를 나타낸다. 본 연구에서는 음속노즐 출구 직경의 1.5배 거리에 경사각 $60^{\cire}$~$90^{\cire}$로 설치된 평판에 미치는 초음속 제트에 대해 쉴릴렌 장치를 이용하여 유동구조를 가시화 하였으며, 평판 위에 작용하는 압력분포를 측정하였고 감열지를 이용하여 평판 표면 유동을 가시화하여 기존의 연구결과와 비교하였다. 연구결과 간단한 방법으로 저마하수에서의 평판 유동을 가시화 할 수 있는 방법을 제시하고 충돌제트의 유동구조를 규명하였다.

• 한국수자원학회논문집
• /
• 제38권10호
• /
• pp.871-883
• /
• 2005

본 논문은 식생된 개수로 흐름에서 난류의 비등방성이 평균유속 및 난류구조에 미치는 영향을 파악하기 위한 수치모의 연구이다. 비등방성 난류모형인 레이놀즈응력모형을 이용하여 식생이 없는 일반 개수로 흐름과 침수 및 정수식생된 개수로 흐름에서의 평균유속 및 난류구조를 수치모의하였다. 수치모의 결과를 기존의 실험결과 및 k-$\epsilon$ 모형과 응력대수식모형에 의한 계산 결과와 비교하였다. 식생이 없는 일반 개수로 흐름과 정수식생된 개수로 흐름에서의 평균유속과 레이놀즈응력을 계산한 결과 등방성 및 비등방성 난류모형에 의한 해석 결과의 차이가 거의 나타나지 않았다. 즉, 난류의 비등방성의 영향이 매우 작은 것으로 나타났다. 그러나 자유수면 및 바닥 근처에서 발생되는 난류의 감쇠효과에 의한 난류의 비등방성은 레이놀즈응력이 가장 잘 예측하는 것으로 나타났다. 침수식생된 개수로 흐름의 경우 식생높이 부근에서 난류의 비등방성이 강하게 발생하는 것으로 나타났다. 계산된 평균유속 및 난류구조는 레이놀즈응력모형이 다른 모형 보다 가장 정확한 예측을 수행하였으며, 등방성 모형인 k-$\epsilon$ 모형은 식생높이 보다 높은 영역에서 평균유속 및 난류강도를 각각 과대 및 과소 예측하는 것으로 나타났다. 또한 계산된 결과를 이용하여 식생된 개수로 흐름에서의 부유사량을 산정한 결과 등방성 난류모형이 부유사량을 과소 산정하는 것으로 나타났다.